- New file autogen.sh.
- Put build scripts in build-aux/ not autoconf/.
- Install lib-*.m4 and config.rpath through gnulib module 'havelib'.
- Install 'test-driver' through automake.
--- /dev/null
+## This file specifies the files and directories that can usually occur in a
+## developer build of this Git repository.
+##
+## Reference: https://git-scm.com/docs/gitignore
+##
+## When we say, "files", it actually means files and directories. By
+## convention, directories are marked through a trailing first and listed
+## first in each category.
+##
+## We don't list files that may occur in exceptional situations (such as
+## temporary files *.h-t), because a developer should notice when such a
+## file is not erased by "make mostlyclean".
+
+# Files brought in by "automake --add-missing --copy":
+/build-aux/compile
+/build-aux/depcomp
+/build-aux/install-sh
+/build-aux/missing
+/build-aux/test-driver
+
+# Other files brought in by autogen.sh:
+/build-aux/config.guess
+/build-aux/config.sub
+/build-aux/config.rpath
+/build-aux/ltmain.sh
+/build-aux/test-driver.diff
+/build-aux/texinfo.tex
+/m4/host-cpu-c-abi.m4
+/m4/lib-ld.m4
+/m4/lib-link.m4
+/m4/lib-prefix.m4
+/m4/libtool.m4
+/m4/ltoptions.m4
+/m4/ltsugar.m4
+/m4/ltversion.m4
+/m4/lt~obsolete.m4
+
+# Files generated by the autotools:
+/aclocal.m4
+/configure
+/Makefile.in
+/autoconf/cl_config.h.in
+/benchmarks/Makefile.in
+/doc/Makefile.in
+/examples/Makefile.in
+/src/Makefile.in
+/tests/Makefile.in
+
+# Files generated by "make" and distributed
+# (i.e. kept by "make distclean")
+/doc/cln.info
+
+# Patterns for all subdirectories: all kinds of automatic backup files.
+*.orig
+*.rej
+*~
+*.kate-swp
+.#*
+\#*#
configure configuration script
configure.in autoconf source for the configuration script
- autoconf/* auxiliary configuration scripts
+ autoconf/* configuration support
+ build-aux/* auxiliary build scripts
m4/* autoconf's driver macros
Makefile.in Makefile master
3. Run
-$ autoreconf -iv
+$ ./autogen.sh
to generate the `configure' script, and proceed in a standard way, i.e.
+++ /dev/null
-#! /bin/sh
-# Output a system dependent set of variables, describing how to set the
-# run time search path of shared libraries in an executable.
-#
-# Copyright 1996-2013 Free Software Foundation, Inc.
-# Taken from GNU libtool, 2001
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-#
-# The first argument passed to this file is the canonical host specification,
-# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or
-# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
-# should be set by the caller.
-#
-# The set of defined variables is at the end of this script.
-
-# Known limitations:
-# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer
-# than 256 bytes, otherwise the compiler driver will dump core. The only
-# known workaround is to choose shorter directory names for the build
-# directory and/or the installation directory.
-
-# All known linkers require a '.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-shrext=.so
-
-host="$1"
-host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-# Code taken from libtool.m4's _LT_CC_BASENAME.
-
-for cc_temp in $CC""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'`
-
-# Code taken from libtool.m4's _LT_COMPILER_PIC.
-
-wl=
-if test "$GCC" = yes; then
- wl='-Wl,'
-else
- case "$host_os" in
- aix*)
- wl='-Wl,'
- ;;
- mingw* | cygwin* | pw32* | os2* | cegcc*)
- ;;
- hpux9* | hpux10* | hpux11*)
- wl='-Wl,'
- ;;
- irix5* | irix6* | nonstopux*)
- wl='-Wl,'
- ;;
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
- case $cc_basename in
- ecc*)
- wl='-Wl,'
- ;;
- icc* | ifort*)
- wl='-Wl,'
- ;;
- lf95*)
- wl='-Wl,'
- ;;
- nagfor*)
- wl='-Wl,-Wl,,'
- ;;
- pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
- wl='-Wl,'
- ;;
- ccc*)
- wl='-Wl,'
- ;;
- xl* | bgxl* | bgf* | mpixl*)
- wl='-Wl,'
- ;;
- como)
- wl='-lopt='
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ F* | *Sun*Fortran*)
- wl=
- ;;
- *Sun\ C*)
- wl='-Wl,'
- ;;
- esac
- ;;
- esac
- ;;
- newsos6)
- ;;
- *nto* | *qnx*)
- ;;
- osf3* | osf4* | osf5*)
- wl='-Wl,'
- ;;
- rdos*)
- ;;
- solaris*)
- case $cc_basename in
- f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
- wl='-Qoption ld '
- ;;
- *)
- wl='-Wl,'
- ;;
- esac
- ;;
- sunos4*)
- wl='-Qoption ld '
- ;;
- sysv4 | sysv4.2uw2* | sysv4.3*)
- wl='-Wl,'
- ;;
- sysv4*MP*)
- ;;
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- wl='-Wl,'
- ;;
- unicos*)
- wl='-Wl,'
- ;;
- uts4*)
- ;;
- esac
-fi
-
-# Code taken from libtool.m4's _LT_LINKER_SHLIBS.
-
-hardcode_libdir_flag_spec=
-hardcode_libdir_separator=
-hardcode_direct=no
-hardcode_minus_L=no
-
-case "$host_os" in
- cygwin* | mingw* | pw32* | cegcc*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- if test "$GCC" != yes; then
- with_gnu_ld=no
- fi
- ;;
- interix*)
- # we just hope/assume this is gcc and not c89 (= MSVC++)
- with_gnu_ld=yes
- ;;
- openbsd*)
- with_gnu_ld=no
- ;;
-esac
-
-ld_shlibs=yes
-if test "$with_gnu_ld" = yes; then
- # Set some defaults for GNU ld with shared library support. These
- # are reset later if shared libraries are not supported. Putting them
- # here allows them to be overridden if necessary.
- # Unlike libtool, we use -rpath here, not --rpath, since the documented
- # option of GNU ld is called -rpath, not --rpath.
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- case "$host_os" in
- aix[3-9]*)
- # On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
- ld_shlibs=no
- fi
- ;;
- amigaos*)
- case "$host_cpu" in
- powerpc)
- ;;
- m68k)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- ;;
- esac
- ;;
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- :
- else
- ld_shlibs=no
- fi
- ;;
- cygwin* | mingw* | pw32* | cegcc*)
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec='-L$libdir'
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- :
- else
- ld_shlibs=no
- fi
- ;;
- haiku*)
- ;;
- interix[3-9]*)
- hardcode_direct=no
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- ;;
- gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- :
- else
- ld_shlibs=no
- fi
- ;;
- netbsd*)
- ;;
- solaris*)
- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
- ld_shlibs=no
- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- :
- else
- ld_shlibs=no
- fi
- ;;
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
- case `$LD -v 2>&1` in
- *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
- ld_shlibs=no
- ;;
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
- else
- ld_shlibs=no
- fi
- ;;
- esac
- ;;
- sunos4*)
- hardcode_direct=yes
- ;;
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- :
- else
- ld_shlibs=no
- fi
- ;;
- esac
- if test "$ld_shlibs" = no; then
- hardcode_libdir_flag_spec=
- fi
-else
- case "$host_os" in
- aix3*)
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- hardcode_minus_L=yes
- if test "$GCC" = yes; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- hardcode_direct=unsupported
- fi
- ;;
- aix[4-9]*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- else
- aix_use_runtimelinking=no
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
- for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
- aix_use_runtimelinking=yes
- break
- fi
- done
- ;;
- esac
- fi
- hardcode_direct=yes
- hardcode_libdir_separator=':'
- if test "$GCC" = yes; then
- case $host_os in aix4.[012]|aix4.[012].*)
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- :
- else
- # We have old collect2
- hardcode_direct=unsupported
- hardcode_minus_L=yes
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_libdir_separator=
- fi
- ;;
- esac
- fi
- # Begin _LT_AC_SYS_LIBPATH_AIX.
- echo 'int main () { return 0; }' > conftest.c
- ${CC} ${LDFLAGS} conftest.c -o conftest
- aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`
- if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`
- fi
- if test -z "$aix_libpath"; then
- aix_libpath="/usr/lib:/lib"
- fi
- rm -f conftest.c conftest
- # End _LT_AC_SYS_LIBPATH_AIX.
- if test "$aix_use_runtimelinking" = yes; then
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
- else
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- fi
- fi
- ;;
- amigaos*)
- case "$host_cpu" in
- powerpc)
- ;;
- m68k)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- ;;
- esac
- ;;
- bsdi[45]*)
- ;;
- cygwin* | mingw* | pw32* | cegcc*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec=' '
- libext=lib
- ;;
- darwin* | rhapsody*)
- hardcode_direct=no
- if { case $cc_basename in ifort*) true;; *) test "$GCC" = yes;; esac; }; then
- :
- else
- ld_shlibs=no
- fi
- ;;
- dgux*)
- hardcode_libdir_flag_spec='-L$libdir'
- ;;
- freebsd2.2*)
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- ;;
- freebsd2*)
- hardcode_direct=yes
- hardcode_minus_L=yes
- ;;
- freebsd* | dragonfly*)
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- ;;
- hpux9*)
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_direct=yes
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
- ;;
- hpux10*)
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_direct=yes
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
- fi
- ;;
- hpux11*)
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
- case $host_cpu in
- hppa*64*|ia64*)
- hardcode_direct=no
- ;;
- *)
- hardcode_direct=yes
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
- ;;
- esac
- fi
- ;;
- irix5* | irix6* | nonstopux*)
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- ;;
- netbsd*)
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- ;;
- newsos6)
- hardcode_direct=yes
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- ;;
- *nto* | *qnx*)
- ;;
- openbsd*)
- if test -f /usr/libexec/ld.so; then
- hardcode_direct=yes
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- else
- case "$host_os" in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- hardcode_libdir_flag_spec='-R$libdir'
- ;;
- *)
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- ;;
- esac
- fi
- else
- ld_shlibs=no
- fi
- ;;
- os2*)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- ;;
- osf3*)
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- ;;
- osf4* | osf5*)
- if test "$GCC" = yes; then
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- else
- # Both cc and cxx compiler support -rpath directly
- hardcode_libdir_flag_spec='-rpath $libdir'
- fi
- hardcode_libdir_separator=:
- ;;
- solaris*)
- hardcode_libdir_flag_spec='-R$libdir'
- ;;
- sunos4*)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_direct=yes
- hardcode_minus_L=yes
- ;;
- sysv4)
- case $host_vendor in
- sni)
- hardcode_direct=yes # is this really true???
- ;;
- siemens)
- hardcode_direct=no
- ;;
- motorola)
- hardcode_direct=no #Motorola manual says yes, but my tests say they lie
- ;;
- esac
- ;;
- sysv4.3*)
- ;;
- sysv4*MP*)
- if test -d /usr/nec; then
- ld_shlibs=yes
- fi
- ;;
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
- ;;
- sysv5* | sco3.2v5* | sco5v6*)
- hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- hardcode_libdir_separator=':'
- ;;
- uts4*)
- hardcode_libdir_flag_spec='-L$libdir'
- ;;
- *)
- ld_shlibs=no
- ;;
- esac
-fi
-
-# Check dynamic linker characteristics
-# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER.
-# Unlike libtool.m4, here we don't care about _all_ names of the library, but
-# only about the one the linker finds when passed -lNAME. This is the last
-# element of library_names_spec in libtool.m4, or possibly two of them if the
-# linker has special search rules.
-library_names_spec= # the last element of library_names_spec in libtool.m4
-libname_spec='lib$name'
-case "$host_os" in
- aix3*)
- library_names_spec='$libname.a'
- ;;
- aix[4-9]*)
- library_names_spec='$libname$shrext'
- ;;
- amigaos*)
- case "$host_cpu" in
- powerpc*)
- library_names_spec='$libname$shrext' ;;
- m68k)
- library_names_spec='$libname.a' ;;
- esac
- ;;
- beos*)
- library_names_spec='$libname$shrext'
- ;;
- bsdi[45]*)
- library_names_spec='$libname$shrext'
- ;;
- cygwin* | mingw* | pw32* | cegcc*)
- shrext=.dll
- library_names_spec='$libname.dll.a $libname.lib'
- ;;
- darwin* | rhapsody*)
- shrext=.dylib
- library_names_spec='$libname$shrext'
- ;;
- dgux*)
- library_names_spec='$libname$shrext'
- ;;
- freebsd* | dragonfly*)
- case "$host_os" in
- freebsd[123]*)
- library_names_spec='$libname$shrext$versuffix' ;;
- *)
- library_names_spec='$libname$shrext' ;;
- esac
- ;;
- gnu*)
- library_names_spec='$libname$shrext'
- ;;
- haiku*)
- library_names_spec='$libname$shrext'
- ;;
- hpux9* | hpux10* | hpux11*)
- case $host_cpu in
- ia64*)
- shrext=.so
- ;;
- hppa*64*)
- shrext=.sl
- ;;
- *)
- shrext=.sl
- ;;
- esac
- library_names_spec='$libname$shrext'
- ;;
- interix[3-9]*)
- library_names_spec='$libname$shrext'
- ;;
- irix5* | irix6* | nonstopux*)
- library_names_spec='$libname$shrext'
- case "$host_os" in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in
- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;;
- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;;
- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;;
- *) libsuff= shlibsuff= ;;
- esac
- ;;
- esac
- ;;
- linux*oldld* | linux*aout* | linux*coff*)
- ;;
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
- library_names_spec='$libname$shrext'
- ;;
- knetbsd*-gnu)
- library_names_spec='$libname$shrext'
- ;;
- netbsd*)
- library_names_spec='$libname$shrext'
- ;;
- newsos6)
- library_names_spec='$libname$shrext'
- ;;
- *nto* | *qnx*)
- library_names_spec='$libname$shrext'
- ;;
- openbsd*)
- library_names_spec='$libname$shrext$versuffix'
- ;;
- os2*)
- libname_spec='$name'
- shrext=.dll
- library_names_spec='$libname.a'
- ;;
- osf3* | osf4* | osf5*)
- library_names_spec='$libname$shrext'
- ;;
- rdos*)
- ;;
- solaris*)
- library_names_spec='$libname$shrext'
- ;;
- sunos4*)
- library_names_spec='$libname$shrext$versuffix'
- ;;
- sysv4 | sysv4.3*)
- library_names_spec='$libname$shrext'
- ;;
- sysv4*MP*)
- library_names_spec='$libname$shrext'
- ;;
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- library_names_spec='$libname$shrext'
- ;;
- tpf*)
- library_names_spec='$libname$shrext'
- ;;
- uts4*)
- library_names_spec='$libname$shrext'
- ;;
-esac
-
-sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
-escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
-shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
-escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-
-LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
-
-# How to pass a linker flag through the compiler.
-wl="$escaped_wl"
-
-# Static library suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally "so").
-shlibext="$shlibext"
-
-# Format of library name prefix.
-libname_spec="$escaped_libname_spec"
-
-# Library names that the linker finds when passed -lNAME.
-library_names_spec="$escaped_library_names_spec"
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator="$hardcode_libdir_separator"
-
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct="$hardcode_direct"
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L="$hardcode_minus_L"
-
-EOF
+++ /dev/null
-#! /bin/sh
-# test-driver - basic testsuite driver script.
-
-scriptversion=2012-06-27.10; # UTC
-
-# Copyright (C) 2011-2013 Free Software Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-# Make unconditional expansion of undefined variables an error. This
-# helps a lot in preventing typo-related bugs.
-set -u
-
-usage_error ()
-{
- echo "$0: $*" >&2
- print_usage >&2
- exit 2
-}
-
-print_usage ()
-{
- cat <<END
-Usage:
- test-driver --test-name=NAME --log-file=PATH --trs-file=PATH
- [--expect-failure={yes|no}] [--color-tests={yes|no}]
- [--enable-hard-errors={yes|no}] [--] TEST-SCRIPT
-The '--test-name', '--log-file' and '--trs-file' options are mandatory.
-END
-}
-
-# TODO: better error handling in option parsing (in particular, ensure
-# TODO: $log_file, $trs_file and $test_name are defined).
-test_name= # Used for reporting.
-log_file= # Where to save the output of the test script.
-trs_file= # Where to save the metadata of the test run.
-expect_failure=no
-color_tests=no
-enable_hard_errors=yes
-while test $# -gt 0; do
- case $1 in
- --help) print_usage; exit $?;;
- --version) echo "test-driver $scriptversion"; exit $?;;
- --test-name) test_name=$2; shift;;
- --log-file) log_file=$2; shift;;
- --trs-file) trs_file=$2; shift;;
- --color-tests) color_tests=$2; shift;;
- --expect-failure) expect_failure=$2; shift;;
- --enable-hard-errors) enable_hard_errors=$2; shift;;
- --) shift; break;;
- -*) usage_error "invalid option: '$1'";;
- esac
- shift
-done
-
-if test $color_tests = yes; then
- # Keep this in sync with 'lib/am/check.am:$(am__tty_colors)'.
- red='\e[0;31m' # Red.
- grn='\e[0;32m' # Green.
- lgn='\e[1;32m' # Light green.
- blu='\e[1;34m' # Blue.
- mgn='\e[0;35m' # Magenta.
- std='\e[m' # No color.
-else
- red= grn= lgn= blu= mgn= std=
-fi
-
-do_exit='rm -f $log_file $trs_file; (exit $st); exit $st'
-trap "st=129; $do_exit" 1
-trap "st=130; $do_exit" 2
-trap "st=141; $do_exit" 13
-trap "st=143; $do_exit" 15
-
-# Test script is run here.
-"$@" >$log_file 2>&1
-estatus=$?
-if test $enable_hard_errors = no && test $estatus -eq 99; then
- estatus=1
-fi
-
-case $estatus:$expect_failure in
- 0:yes) col=$red res=XPASS recheck=yes gcopy=yes;;
- 0:*) col=$grn res=PASS recheck=no gcopy=no;;
- 77:*) col=$blu res=SKIP recheck=no gcopy=yes;;
- 99:*) col=$mgn res=ERROR recheck=yes gcopy=yes;;
- *:yes) col=$lgn res=XFAIL recheck=no gcopy=yes;;
- *:*) col=$red res=FAIL recheck=yes gcopy=yes;;
-esac
-
-# Report outcome to console.
-echo "${col}${res}${std}: $test_name"
-
-# Register the test result, and other relevant metadata.
-echo ":test-result: $res" > $trs_file
-echo ":global-test-result: $res" >> $trs_file
-echo ":recheck: $recheck" >> $trs_file
-echo ":copy-in-global-log: $gcopy" >> $trs_file
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
--- /dev/null
+#!/bin/sh
+# Convenience script for regenerating all autogeneratable files that are
+# omitted from the version control repository. In particular, this script
+# also regenerates all aclocal.m4, config.h.in, Makefile.in, configure files
+# with new versions of autoconf or automake.
+#
+# This script requires autoconf-2.63..2.69 and automake-1.11..1.16 in the PATH.
+
+# Copyright (C) 2003-2019 Free Software Foundation, Inc.
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <https://www.gnu.org/licenses/>.
+
+# Usage: ./autogen.sh
+
+GETTEXT_VERSION=0.20.1
+TEXINFO_VERSION=6.5
+
+mkdir -p build-aux m4
+
+# libtool
+# Don't use libtoolize, as it may not be installed or may be outdated.
+for f in build-aux/ltmain.sh m4/libtool.m4 m4/ltoptions.m4 m4/ltsugar.m4 m4/ltversion.m4 m4/lt~obsolete.m4; do
+ if test ! -f $f; then
+ { wget -nv --timeout=5 -O $f.tmp "https://git.savannah.gnu.org/gitweb/?p=gettext.git;a=blob_plain;f=${f};hb=refs/tags/v${GETTEXT_VERSION}" \
+ && mv $f.tmp $f; \
+ } || rm -f $f.tmp
+ fi
+done
+
+# config.{guess,sub}, gnulib module 'havelib', test-driver.diff
+for f in build-aux/config.guess build-aux/config.sub \
+ m4/lib-ld.m4 m4/lib-link.m4 m4/lib-prefix.m4 m4/host-cpu-c-abi.m4 build-aux/config.rpath \
+ build-aux/test-driver.diff; do
+ if test ! -f $f; then
+ { wget -nv --timeout=5 -O $f.tmp "https://git.savannah.gnu.org/gitweb/?p=gnulib.git;a=blob_plain;f=${f}" \
+ && mv $f.tmp $f; \
+ } || rm -f $f.tmp
+ fi
+done
+
+# texinfo.tex
+# The most recent snapshot of it is available in the gnulib repository.
+# But this is a snapshot, with all possible dangers.
+# A stable release of it is available through "automake --add-missing --copy",
+# but that may be too old. So take the version which matches the latest stable
+# texinfo release.
+for f in texinfo.tex; do
+ g="build-aux/$f"
+ if test ! -f $g; then
+ { wget -nv --timeout=5 -O $g.tmp "https://git.savannah.gnu.org/gitweb/?p=texinfo.git;a=blob_plain;f=doc/${f};hb=refs/tags/texinfo-${TEXINFO_VERSION}" \
+ && mv $g.tmp $g; \
+ } || rm -f $g.tmp
+ fi
+done
+
+aclocal -I m4
+autoconf
+autoheader && touch autoconf/cl_config.h.in
+# Make sure we get new versions of files brought in by automake.
+(cd build-aux && rm -f ar-lib compile depcomp install-sh mdate-sh missing test-driver)
+automake --add-missing --copy
+patch build-aux/test-driver < build-aux/test-driver.diff
+# Get rid of autom4te.cache directory.
+rm -rf autom4te.cache
AC_INIT([cln], cl_version)
AC_PREREQ(2.59)
AC_CONFIG_SRCDIR(src/integer/gcd/cl_I_gcd.cc)
-AC_CONFIG_AUX_DIR([autoconf])
+AC_CONFIG_AUX_DIR([build-aux])
AC_CONFIG_MACRO_DIR([m4])
AC_CONFIG_HEADERS(autoconf/cl_config.h include/cln/config.h include/cln/host_cpu.h include/cln/version.h src/base/cl_base_config.h src/base/cl_gmpconfig.h src/timing/cl_t_config.h)
AM_INIT_AUTOMAKE([foreign 1.10 dist-bzip2 subdir-objects])
dnl
dnl check for host type
dnl
-CL_CANONICAL_HOST(autoconf)
+CL_CANONICAL_HOST
dnl sets variables host, host_cpu, host_vendor, host_os
CL_CANONICAL_HOST_CPU
dnl DEFS __${host_cpu}__
-dnl Copyright (C) 1993-2008 Free Software Foundation, Inc.
+dnl Copyright (C) 1993-2019 Free Software Foundation, Inc.
dnl This file is free software, distributed under the terms of the GNU
dnl General Public License. As a special exception to the GNU General
dnl Public License, this file may be distributed as part of a program
AC_DEFUN([CL_CANONICAL_HOST],
[AC_REQUIRE([AC_PROG_CC]) dnl Actually: AC_REQUIRE([CL_CC_WORKS])
-dnl Set ac_aux_dir before the cache check, because AM_PROG_LIBTOOL needs it.
-ac_aux_dir=${srcdir}/$1
-dnl A substitute for AC_CONFIG_AUX_DIR_DEFAULT, so we don't need install.sh.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-dnl We have defined $ac_aux_dir.
-AC_PROVIDE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
-dnl In autoconf-2.52, a single AC_CANONICAL_HOST has the effect of inserting
-dnl the code of AC_CANONICAL_BUILD *before* CL_CANONICAL_HOST, i.e. before
-dnl ac_aux_dir has been set. To work around this, we list AC_CANONICAL_BUILD
-dnl explicitly.
-AC_CANONICAL_BUILD
AC_CANONICAL_HOST
])
+++ /dev/null
-# lib-ld.m4 serial 3 (gettext-0.13)
-dnl Copyright (C) 1996-2003 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl Subroutines of libtool.m4,
-dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision
-dnl with libtool.m4.
-
-dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no.
-AC_DEFUN([AC_LIB_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- acl_cv_prog_gnu_ld=yes ;;
-*)
- acl_cv_prog_gnu_ld=no ;;
-esac])
-with_gnu_ld=$acl_cv_prog_gnu_ld
-])
-
-dnl From libtool-1.4. Sets the variable LD.
-AC_DEFUN([AC_LIB_PROG_LD],
-[AC_ARG_WITH(gnu-ld,
-[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- AC_MSG_CHECKING([for ld used by GCC])
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [[\\/]* | [A-Za-z]:[\\/]*)]
- [re_direlt='/[^/][^/]*/\.\./']
- # Canonicalize the path of ld
- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(acl_cv_path_LD,
-[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- acl_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break ;;
- *)
- test "$with_gnu_ld" != yes && break ;;
- esac
- fi
- done
- IFS="$ac_save_ifs"
-else
- acl_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$acl_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT($LD)
-else
- AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_LIB_PROG_LD_GNU
-])
+++ /dev/null
-# lib-link.m4 serial 9 (gettext-0.16)
-dnl Copyright (C) 2001-2006 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-AC_PREREQ(2.50)
-
-dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
-dnl the libraries corresponding to explicit and implicit dependencies.
-dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
-dnl augments the CPPFLAGS variable.
-AC_DEFUN([AC_LIB_LINKFLAGS],
-[
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- AC_REQUIRE([AC_LIB_RPATH])
- define([Name],[translit([$1],[./-], [___])])
- define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
- AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
- AC_LIB_LINKFLAGS_BODY([$1], [$2])
- ac_cv_lib[]Name[]_libs="$LIB[]NAME"
- ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
- ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
- ])
- LIB[]NAME="$ac_cv_lib[]Name[]_libs"
- LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
- INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
- AC_SUBST([LIB]NAME)
- AC_SUBST([LTLIB]NAME)
- dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
- dnl results of this search when this library appears as a dependency.
- HAVE_LIB[]NAME=yes
- undefine([Name])
- undefine([NAME])
-])
-
-dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode)
-dnl searches for libname and the libraries corresponding to explicit and
-dnl implicit dependencies, together with the specified include files and
-dnl the ability to compile and link the specified testcode. If found, it
-dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and
-dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and
-dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
-dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
-AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
-[
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- AC_REQUIRE([AC_LIB_RPATH])
- define([Name],[translit([$1],[./-], [___])])
- define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
-
- dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
- dnl accordingly.
- AC_LIB_LINKFLAGS_BODY([$1], [$2])
-
- dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
- dnl because if the user has installed lib[]Name and not disabled its use
- dnl via --without-lib[]Name-prefix, he wants to use it.
- ac_save_CPPFLAGS="$CPPFLAGS"
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
-
- AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
- ac_save_LIBS="$LIBS"
- LIBS="$LIBS $LIB[]NAME"
- AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no])
- LIBS="$ac_save_LIBS"
- ])
- if test "$ac_cv_lib[]Name" = yes; then
- HAVE_LIB[]NAME=yes
- AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.])
- AC_MSG_CHECKING([how to link with lib[]$1])
- AC_MSG_RESULT([$LIB[]NAME])
- else
- HAVE_LIB[]NAME=no
- dnl If $LIB[]NAME didn't lead to a usable library, we don't need
- dnl $INC[]NAME either.
- CPPFLAGS="$ac_save_CPPFLAGS"
- LIB[]NAME=
- LTLIB[]NAME=
- fi
- AC_SUBST([HAVE_LIB]NAME)
- AC_SUBST([LIB]NAME)
- AC_SUBST([LTLIB]NAME)
- undefine([Name])
- undefine([NAME])
-])
-
-dnl Determine the platform dependent parameters needed to use rpath:
-dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator,
-dnl hardcode_direct, hardcode_minus_L.
-AC_DEFUN([AC_LIB_RPATH],
-[
- dnl Tell automake >= 1.10 to complain if config.rpath is missing.
- m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])])
- AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS
- AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld
- AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host
- AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
- AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [
- CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
- ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
- . ./conftest.sh
- rm -f ./conftest.sh
- acl_cv_rpath=done
- ])
- wl="$acl_cv_wl"
- libext="$acl_cv_libext"
- shlibext="$acl_cv_shlibext"
- hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
- hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
- hardcode_direct="$acl_cv_hardcode_direct"
- hardcode_minus_L="$acl_cv_hardcode_minus_L"
- dnl Determine whether the user wants rpath handling at all.
- AC_ARG_ENABLE(rpath,
- [ --disable-rpath do not hardcode runtime library paths],
- :, enable_rpath=yes)
-])
-
-dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
-dnl the libraries corresponding to explicit and implicit dependencies.
-dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
-AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
-[
- AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
- define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
- dnl By default, look in $includedir and $libdir.
- use_additional=yes
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- AC_LIB_ARG_WITH([lib$1-prefix],
-[ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib
- --without-lib$1-prefix don't search for lib$1 in includedir and libdir],
-[
- if test "X$withval" = "Xno"; then
- use_additional=no
- else
- if test "X$withval" = "X"; then
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- else
- additional_includedir="$withval/include"
- additional_libdir="$withval/$acl_libdirstem"
- fi
- fi
-])
- dnl Search the library and its dependencies in $additional_libdir and
- dnl $LDFLAGS. Using breadth-first-seach.
- LIB[]NAME=
- LTLIB[]NAME=
- INC[]NAME=
- rpathdirs=
- ltrpathdirs=
- names_already_handled=
- names_next_round='$1 $2'
- while test -n "$names_next_round"; do
- names_this_round="$names_next_round"
- names_next_round=
- for name in $names_this_round; do
- already_handled=
- for n in $names_already_handled; do
- if test "$n" = "$name"; then
- already_handled=yes
- break
- fi
- done
- if test -z "$already_handled"; then
- names_already_handled="$names_already_handled $name"
- dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
- dnl or AC_LIB_HAVE_LINKFLAGS call.
- uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
- eval value=\"\$HAVE_LIB$uppername\"
- if test -n "$value"; then
- if test "$value" = yes; then
- eval value=\"\$LIB$uppername\"
- test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
- eval value=\"\$LTLIB$uppername\"
- test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
- else
- dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
- dnl that this library doesn't exist. So just drop it.
- :
- fi
- else
- dnl Search the library lib$name in $additional_libdir and $LDFLAGS
- dnl and the already constructed $LIBNAME/$LTLIBNAME.
- found_dir=
- found_la=
- found_so=
- found_a=
- if test $use_additional = yes; then
- if test -n "$shlibext" \
- && { test -f "$additional_libdir/lib$name.$shlibext" \
- || { test "$shlibext" = dll \
- && test -f "$additional_libdir/lib$name.dll.a"; }; }; then
- found_dir="$additional_libdir"
- if test -f "$additional_libdir/lib$name.$shlibext"; then
- found_so="$additional_libdir/lib$name.$shlibext"
- else
- found_so="$additional_libdir/lib$name.dll.a"
- fi
- if test -f "$additional_libdir/lib$name.la"; then
- found_la="$additional_libdir/lib$name.la"
- fi
- else
- if test -f "$additional_libdir/lib$name.$libext"; then
- found_dir="$additional_libdir"
- found_a="$additional_libdir/lib$name.$libext"
- if test -f "$additional_libdir/lib$name.la"; then
- found_la="$additional_libdir/lib$name.la"
- fi
- fi
- fi
- fi
- if test "X$found_dir" = "X"; then
- for x in $LDFLAGS $LTLIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- case "$x" in
- -L*)
- dir=`echo "X$x" | sed -e 's/^X-L//'`
- if test -n "$shlibext" \
- && { test -f "$dir/lib$name.$shlibext" \
- || { test "$shlibext" = dll \
- && test -f "$dir/lib$name.dll.a"; }; }; then
- found_dir="$dir"
- if test -f "$dir/lib$name.$shlibext"; then
- found_so="$dir/lib$name.$shlibext"
- else
- found_so="$dir/lib$name.dll.a"
- fi
- if test -f "$dir/lib$name.la"; then
- found_la="$dir/lib$name.la"
- fi
- else
- if test -f "$dir/lib$name.$libext"; then
- found_dir="$dir"
- found_a="$dir/lib$name.$libext"
- if test -f "$dir/lib$name.la"; then
- found_la="$dir/lib$name.la"
- fi
- fi
- fi
- ;;
- esac
- if test "X$found_dir" != "X"; then
- break
- fi
- done
- fi
- if test "X$found_dir" != "X"; then
- dnl Found the library.
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
- if test "X$found_so" != "X"; then
- dnl Linking with a shared library. We attempt to hardcode its
- dnl directory into the executable's runpath, unless it's the
- dnl standard /usr/lib.
- if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/$acl_libdirstem"; then
- dnl No hardcoding is needed.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- else
- dnl Use an explicit option to hardcode DIR into the resulting
- dnl binary.
- dnl Potentially add DIR to ltrpathdirs.
- dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $found_dir"
- fi
- dnl The hardcoding into $LIBNAME is system dependent.
- if test "$hardcode_direct" = yes; then
- dnl Using DIR/libNAME.so during linking hardcodes DIR into the
- dnl resulting binary.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- else
- if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
- dnl Use an explicit option to hardcode DIR into the resulting
- dnl binary.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- dnl Potentially add DIR to rpathdirs.
- dnl The rpathdirs will be appended to $LIBNAME at the end.
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $found_dir"
- fi
- else
- dnl Rely on "-L$found_dir".
- dnl But don't add it if it's already contained in the LDFLAGS
- dnl or the already constructed $LIBNAME
- haveit=
- for x in $LDFLAGS $LIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
- fi
- if test "$hardcode_minus_L" != no; then
- dnl FIXME: Not sure whether we should use
- dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
- dnl here.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- else
- dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH
- dnl here, because this doesn't fit in flags passed to the
- dnl compiler. So give up. No hardcoding. This affects only
- dnl very old systems.
- dnl FIXME: Not sure whether we should use
- dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
- dnl here.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
- fi
- fi
- fi
- fi
- else
- if test "X$found_a" != "X"; then
- dnl Linking with a static library.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
- else
- dnl We shouldn't come here, but anyway it's good to have a
- dnl fallback.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
- fi
- fi
- dnl Assume the include files are nearby.
- additional_includedir=
- case "$found_dir" in
- */$acl_libdirstem | */$acl_libdirstem/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
- additional_includedir="$basedir/include"
- ;;
- esac
- if test "X$additional_includedir" != "X"; then
- dnl Potentially add $additional_includedir to $INCNAME.
- dnl But don't add it
- dnl 1. if it's the standard /usr/include,
- dnl 2. if it's /usr/local/include and we are using GCC on Linux,
- dnl 3. if it's already present in $CPPFLAGS or the already
- dnl constructed $INCNAME,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_includedir" != "X/usr/include"; then
- haveit=
- if test "X$additional_includedir" = "X/usr/local/include"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- for x in $CPPFLAGS $INC[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-I$additional_includedir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_includedir"; then
- dnl Really add $additional_includedir to $INCNAME.
- INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
- fi
- fi
- fi
- fi
- fi
- dnl Look for dependencies.
- if test -n "$found_la"; then
- dnl Read the .la file. It defines the variables
- dnl dlname, library_names, old_library, dependency_libs, current,
- dnl age, revision, installed, dlopen, dlpreopen, libdir.
- save_libdir="$libdir"
- case "$found_la" in
- */* | *\\*) . "$found_la" ;;
- *) . "./$found_la" ;;
- esac
- libdir="$save_libdir"
- dnl We use only dependency_libs.
- for dep in $dependency_libs; do
- case "$dep" in
- -L*)
- additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
- dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
- dnl But don't add it
- dnl 1. if it's the standard /usr/lib,
- dnl 2. if it's /usr/local/lib and we are using GCC on Linux,
- dnl 3. if it's already present in $LDFLAGS or the already
- dnl constructed $LIBNAME,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
- haveit=
- if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- haveit=
- for x in $LDFLAGS $LIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- dnl Really add $additional_libdir to $LIBNAME.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
- fi
- fi
- haveit=
- for x in $LDFLAGS $LTLIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- dnl Really add $additional_libdir to $LTLIBNAME.
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
- fi
- fi
- fi
- fi
- ;;
- -R*)
- dir=`echo "X$dep" | sed -e 's/^X-R//'`
- if test "$enable_rpath" != no; then
- dnl Potentially add DIR to rpathdirs.
- dnl The rpathdirs will be appended to $LIBNAME at the end.
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $dir"
- fi
- dnl Potentially add DIR to ltrpathdirs.
- dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $dir"
- fi
- fi
- ;;
- -l*)
- dnl Handle this in the next round.
- names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
- ;;
- *.la)
- dnl Handle this in the next round. Throw away the .la's
- dnl directory; it is already contained in a preceding -L
- dnl option.
- names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
- ;;
- *)
- dnl Most likely an immediate library name.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
- ;;
- esac
- done
- fi
- else
- dnl Didn't find the library; assume it is in the system directories
- dnl known to the linker and runtime loader. (All the system
- dnl directories known to the linker should also be known to the
- dnl runtime loader, otherwise the system is severely misconfigured.)
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
- fi
- fi
- fi
- done
- done
- if test "X$rpathdirs" != "X"; then
- if test -n "$hardcode_libdir_separator"; then
- dnl Weird platform: only the last -rpath option counts, the user must
- dnl pass all path elements in one option. We can arrange that for a
- dnl single library, but not when more than one $LIBNAMEs are used.
- alldirs=
- for found_dir in $rpathdirs; do
- alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
- done
- dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl.
- acl_save_libdir="$libdir"
- libdir="$alldirs"
- eval flag=\"$hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
- else
- dnl The -rpath options are cumulative.
- for found_dir in $rpathdirs; do
- acl_save_libdir="$libdir"
- libdir="$found_dir"
- eval flag=\"$hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
- done
- fi
- fi
- if test "X$ltrpathdirs" != "X"; then
- dnl When using libtool, the option that works for both libraries and
- dnl executables is -R. The -R options are cumulative.
- for found_dir in $ltrpathdirs; do
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
- done
- fi
-])
-
-dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
-dnl unless already present in VAR.
-dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
-dnl contains two or three consecutive elements that belong together.
-AC_DEFUN([AC_LIB_APPENDTOVAR],
-[
- for element in [$2]; do
- haveit=
- for x in $[$1]; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X$element"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- [$1]="${[$1]}${[$1]:+ }$element"
- fi
- done
-])
-
-dnl For those cases where a variable contains several -L and -l options
-dnl referring to unknown libraries and directories, this macro determines the
-dnl necessary additional linker options for the runtime path.
-dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL])
-dnl sets LDADDVAR to linker options needed together with LIBSVALUE.
-dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed,
-dnl otherwise linking without libtool is assumed.
-AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS],
-[
- AC_REQUIRE([AC_LIB_RPATH])
- AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
- $1=
- if test "$enable_rpath" != no; then
- if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
- dnl Use an explicit option to hardcode directories into the resulting
- dnl binary.
- rpathdirs=
- next=
- for opt in $2; do
- if test -n "$next"; then
- dir="$next"
- dnl No need to hardcode the standard /usr/lib.
- if test "X$dir" != "X/usr/$acl_libdirstem"; then
- rpathdirs="$rpathdirs $dir"
- fi
- next=
- else
- case $opt in
- -L) next=yes ;;
- -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'`
- dnl No need to hardcode the standard /usr/lib.
- if test "X$dir" != "X/usr/$acl_libdirstem"; then
- rpathdirs="$rpathdirs $dir"
- fi
- next= ;;
- *) next= ;;
- esac
- fi
- done
- if test "X$rpathdirs" != "X"; then
- if test -n ""$3""; then
- dnl libtool is used for linking. Use -R options.
- for dir in $rpathdirs; do
- $1="${$1}${$1:+ }-R$dir"
- done
- else
- dnl The linker is used for linking directly.
- if test -n "$hardcode_libdir_separator"; then
- dnl Weird platform: only the last -rpath option counts, the user
- dnl must pass all path elements in one option.
- alldirs=
- for dir in $rpathdirs; do
- alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$dir"
- done
- acl_save_libdir="$libdir"
- libdir="$alldirs"
- eval flag=\"$hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- $1="$flag"
- else
- dnl The -rpath options are cumulative.
- for dir in $rpathdirs; do
- acl_save_libdir="$libdir"
- libdir="$dir"
- eval flag=\"$hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- $1="${$1}${$1:+ }$flag"
- done
- fi
- fi
- fi
- fi
- fi
- AC_SUBST([$1])
-])
+++ /dev/null
-# lib-prefix.m4 serial 5 (gettext-0.15)
-dnl Copyright (C) 2001-2005 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and
-dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't
-dnl require excessive bracketing.
-ifdef([AC_HELP_STRING],
-[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])],
-[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])])
-
-dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
-dnl to access previously installed libraries. The basic assumption is that
-dnl a user will want packages to use other packages he previously installed
-dnl with the same --prefix option.
-dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
-dnl libraries, but is otherwise very convenient.
-AC_DEFUN([AC_LIB_PREFIX],
-[
- AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
- AC_REQUIRE([AC_PROG_CC])
- AC_REQUIRE([AC_CANONICAL_HOST])
- AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- dnl By default, look in $includedir and $libdir.
- use_additional=yes
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- AC_LIB_ARG_WITH([lib-prefix],
-[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
- --without-lib-prefix don't search for libraries in includedir and libdir],
-[
- if test "X$withval" = "Xno"; then
- use_additional=no
- else
- if test "X$withval" = "X"; then
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- else
- additional_includedir="$withval/include"
- additional_libdir="$withval/$acl_libdirstem"
- fi
- fi
-])
- if test $use_additional = yes; then
- dnl Potentially add $additional_includedir to $CPPFLAGS.
- dnl But don't add it
- dnl 1. if it's the standard /usr/include,
- dnl 2. if it's already present in $CPPFLAGS,
- dnl 3. if it's /usr/local/include and we are using GCC on Linux,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_includedir" != "X/usr/include"; then
- haveit=
- for x in $CPPFLAGS; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-I$additional_includedir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test "X$additional_includedir" = "X/usr/local/include"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- if test -d "$additional_includedir"; then
- dnl Really add $additional_includedir to $CPPFLAGS.
- CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
- fi
- fi
- fi
- fi
- dnl Potentially add $additional_libdir to $LDFLAGS.
- dnl But don't add it
- dnl 1. if it's the standard /usr/lib,
- dnl 2. if it's already present in $LDFLAGS,
- dnl 3. if it's /usr/local/lib and we are using GCC on Linux,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
- haveit=
- for x in $LDFLAGS; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
- if test -n "$GCC"; then
- case $host_os in
- linux*) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- dnl Really add $additional_libdir to $LDFLAGS.
- LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
- fi
- fi
- fi
- fi
- fi
-])
-
-dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
-dnl acl_final_exec_prefix, containing the values to which $prefix and
-dnl $exec_prefix will expand at the end of the configure script.
-AC_DEFUN([AC_LIB_PREPARE_PREFIX],
-[
- dnl Unfortunately, prefix and exec_prefix get only finally determined
- dnl at the end of configure.
- if test "X$prefix" = "XNONE"; then
- acl_final_prefix="$ac_default_prefix"
- else
- acl_final_prefix="$prefix"
- fi
- if test "X$exec_prefix" = "XNONE"; then
- acl_final_exec_prefix='${prefix}'
- else
- acl_final_exec_prefix="$exec_prefix"
- fi
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
- prefix="$acl_save_prefix"
-])
-
-dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
-dnl variables prefix and exec_prefix bound to the values they will have
-dnl at the end of the configure script.
-AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
-[
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- $1
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-])
-
-dnl AC_LIB_PREPARE_MULTILIB creates a variable acl_libdirstem, containing
-dnl the basename of the libdir, either "lib" or "lib64".
-AC_DEFUN([AC_LIB_PREPARE_MULTILIB],
-[
- dnl There is no formal standard regarding lib and lib64. The current
- dnl practice is that on a system supporting 32-bit and 64-bit instruction
- dnl sets or ABIs, 64-bit libraries go under $prefix/lib64 and 32-bit
- dnl libraries go under $prefix/lib. We determine the compiler's default
- dnl mode by looking at the compiler's library search path. If at least
- dnl of its elements ends in /lib64 or points to a directory whose absolute
- dnl pathname ends in /lib64, we assume a 64-bit ABI. Otherwise we use the
- dnl default, namely "lib".
- acl_libdirstem=lib
- searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
- if test -n "$searchpath"; then
- acl_save_IFS="${IFS= }"; IFS=":"
- for searchdir in $searchpath; do
- if test -d "$searchdir"; then
- case "$searchdir" in
- */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
- *) searchdir=`cd "$searchdir" && pwd`
- case "$searchdir" in
- */lib64 ) acl_libdirstem=lib64 ;;
- esac ;;
- esac
- fi
- done
- IFS="$acl_save_IFS"
- fi
-])
projects / cln.git / commitdiff