- Changes to */Makefile.in triggered by stupid automake-version-thingie.

- added return-behaviour to section BUGS in ginaccint.1
- Fixed cint/Makefile.am to add CINTSYSDIR to PATH (since cint may be
  sitting there).

diff --git a/INSTALL b/INSTALL
index 4555857e83d9bc7f4afb3f18a8febb96bd3da2d5..27873b6254e7081908f359e41f298dc83bfafc1d 100644 (file)
--- a/INSTALL
+++ b/INSTALL
@@ -78,6 +78,18 @@ GiNaC.
 Working with the Cint C++ interpreter
 =====================================
 
-You need to specify
-  --with-cint=$CINTSYSDIR
-...
+The interface to the Cint C++ interpreter is currently in an alpha
+state.  Please see <http://root.cern.ch/root/Cint.html> to learn about
+Cint and install it before installing ginaccint.  For the tool
+makecint to work properly it must know where Cint has its system
+directory.  This is usually done by exporting $CINTSYSDIR to point to
+the proper place.  With GiNaC you may either try to export that
+variable and type
+ $ ./configure --with-cint
+or specify it on the command line saying
+ $ ./configure --with-cint=/my/path/to/cintsysdir
+Good luck!
+
+  Known to work with:  |  Known not to work with:   
+-----------------------+----------------------------
+  Cint 5.14.26         |  Cint 5.14.29              

diff --git a/Makefile.in b/Makefile.in
index a61a6e7495e6e5f76a74d1052e2b8224c9a790d6..3f48f733e7dee537a92c25dcb3faa58991709f77 100644 (file)
--- a/Makefile.in
+++ b/Makefile.in
@@ -82,7 +82,6 @@ GINACLIB_MINOR_VERSION = @GINACLIB_MINOR_VERSION@
 GINACLIB_VERSION = @GINACLIB_VERSION@
 GINSH_LIBS = @GINSH_LIBS@
 LATEX = @LATEX@
-LD = @LD@
 LEX = @LEX@
 LIBGINACCINT = @LIBGINACCINT@
 LIBTOOL = @LIBTOOL@
@@ -95,7 +94,6 @@ MAINT = @MAINT@
 MAKECINT = @MAKECINT@
 MAKEINDEX = @MAKEINDEX@
 MAKEINFO = @MAKEINFO@
-NM = @NM@
 OBJDUMP = @OBJDUMP@
 PACKAGE = @PACKAGE@
 RANLIB = @RANLIB@

diff --git a/aclocal.m4 b/aclocal.m4
index 9f352500325ac31602eeef1329b0ac4710f104f5..aa6a57c6995999d270bcb7fa84ad6761715f14e4 100644 (file)
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -238,7 +238,7 @@ LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
 LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
 DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
 ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
 || AC_MSG_ERROR([libtool configure failed])
 
 # Reload cache, that may have been modified by ltconfig
@@ -270,6 +270,11 @@ AC_REQUIRE([AC_PROG_NM])dnl
 AC_REQUIRE([AC_PROG_LN_S])dnl
 dnl
 
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
 # Check for any special flags to pass to ltconfig.
 libtool_flags="--cache-file=$cache_file"
 test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
@@ -288,7 +293,7 @@ test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
 
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
-case "$host" in
+case "$lt_target" in
 *-*-irix6*)
   # Find out which ABI we are using.
   echo '[#]line __oline__ "configure"' > conftest.$ac_ext
@@ -504,7 +509,6 @@ else
   AC_MSG_RESULT(no)
 fi
 test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_SUBST(LD)
 AC_PROG_LD_GNU
 ])
 
@@ -550,14 +554,13 @@ else
 fi])
 NM="$ac_cv_path_NM"
 AC_MSG_RESULT([$NM])
-AC_SUBST(NM)
 ])
 
 # AC_CHECK_LIBM - check for math library
 AC_DEFUN(AC_CHECK_LIBM,
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 LIBM=
-case "$host" in
+case "$lt_target" in
 *-*-beos* | *-*-cygwin*)
   # These system don't have libm
   ;;

diff --git a/check/Makefile.in b/check/Makefile.in
index ffdee01a629d284cebeacd44ba62560c5cd1b6de..0a17c44640351d6047e7042bf27869c89e07a75e 100644 (file)
--- a/check/Makefile.in
+++ b/check/Makefile.in
@@ -82,7 +82,6 @@ GINACLIB_MINOR_VERSION = @GINACLIB_MINOR_VERSION@
 GINACLIB_VERSION = @GINACLIB_VERSION@
 GINSH_LIBS = @GINSH_LIBS@
 LATEX = @LATEX@
-LD = @LD@
 LEX = @LEX@
 LIBGINACCINT = @LIBGINACCINT@
 LIBTOOL = @LIBTOOL@
@@ -95,7 +94,6 @@ MAINT = @MAINT@
 MAKECINT = @MAKECINT@
 MAKEINDEX = @MAKEINDEX@
 MAKEINFO = @MAKEINFO@
-NM = @NM@
 OBJDUMP = @OBJDUMP@
 PACKAGE = @PACKAGE@
 RANLIB = @RANLIB@

diff --git a/cint/Makefile.am b/cint/Makefile.am
index c43b552320cff41bce343fde2955d1cbb4c4f812..ce243d36d083786bdd16f7cec654fd624042f785 100644 (file)
--- a/cint/Makefile.am
+++ b/cint/Makefile.am
@@ -15,7 +15,7 @@ libginac.la:
          $(MAKE) clean)
 
 ginaccint.bin: libginac.la ginaccint.bin.cpp
-       $(MAKE) -f Makefile.makecint
+       (export CINTSYSDIR=$(CINTSYSDIR); $(MAKE) -f Makefile.makecint PATH=$(PATH):$(CINTSYSDIR))
 
 EXTRA_DIST = dummies.pl
 

diff --git a/cint/Makefile.in b/cint/Makefile.in
index acbcb7935e784977be73fdaaa3ad23f234180ff2..cf069ba571836c885a4170d802dc2d34fb772ed0 100644 (file)
--- a/cint/Makefile.in
+++ b/cint/Makefile.in
@@ -82,7 +82,6 @@ GINACLIB_MINOR_VERSION = @GINACLIB_MINOR_VERSION@
 GINACLIB_VERSION = @GINACLIB_VERSION@
 GINSH_LIBS = @GINSH_LIBS@
 LATEX = @LATEX@
-LD = @LD@
 LEX = @LEX@
 LIBGINACCINT = @LIBGINACCINT@
 LIBTOOL = @LIBTOOL@
@@ -95,7 +94,6 @@ MAINT = @MAINT@
 MAKECINT = @MAKECINT@
 MAKEINDEX = @MAKEINDEX@
 MAKEINFO = @MAKEINFO@
-NM = @NM@
 OBJDUMP = @OBJDUMP@
 PACKAGE = @PACKAGE@
 RANLIB = @RANLIB@
@@ -492,7 +490,7 @@ libginac.la:
          $(MAKE) clean)
 
 ginaccint.bin: libginac.la ginaccint.bin.cpp
-       $(MAKE) -f Makefile.makecint
+       (export CINTSYSDIR=$(CINTSYSDIR); $(MAKE) -f Makefile.makecint PATH=$(PATH):$(CINTSYSDIR))
 
 # Files which are generated by perl scripts
 $(srcdir)/dummies.h $(srcdir)/dummies.cpp: $(srcdir)/dummies.pl

diff --git a/cint/ginaccint.1 b/cint/ginaccint.1
index 7940a5c47b2d05174eeba9cbd3bc6521a3e141f8..96b5769d2599e442e2a4e39c25fe06a4db245aa4 100644 (file)
--- a/cint/ginaccint.1
+++ b/cint/ginaccint.1
@@ -30,7 +30,7 @@ in C++.  It is not necessary to explicitly invoke a print command as
 the last expression is automatically printed:
 .nf
 GiNaC> pow(x+y,4).expand();
-out2 = x^4+4*x^3*y+6*x^2*y^2+4*x*y^3+y^4
+Out2 = x^4+4*x^3*y+6*x^2*y^2+4*x*y^3+y^4
 .fi
 Statements are generally closed by either when a closing brace 
 .RB ( } )
@@ -125,6 +125,19 @@ you encounter as far as possible and contact Masaharu Goto
 <MXJ02154@niftyserve.or.jp> for Cint-related bugs and
 <ginac-bugs@ginac.de> for any bugs in the GiNaC engine.
 
+Only expressions (class
+.BR ex )
+are typed out and available through 
+.BR "\fBOut\fP\fInum\fP" 
+and 
+.BR LAST
+after declaring them.  This accounts for some funny behaviour, like
+.BR fibonacci(7)
+doesn't print, but
+.BR fibonacci(7)*1
+does, since this is not a naked number but an expression holding
+that number.
+
 .SH AUTHOR
 .TP
 The GiNaC Group

diff --git a/configure b/configure
index 4876d446091fbf398bc6a23a8e853312b5fd0d8a..df5452a6bd0694a23bfd1fca14313f86eb57be96 100755 (executable)
--- a/configure
+++ b/configure
@@ -1550,9 +1550,8 @@ else
   echo "$ac_t""no" 1>&6
 fi
 test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-
 echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1556: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1555: checking if the linker ($LD) is GNU ld" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1568,7 +1567,7 @@ echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
 
 
 echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1572: checking for BSD-compatible nm" >&5
+echo "configure:1571: checking for BSD-compatible nm" >&5
 if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1603,9 +1602,8 @@ fi
 NM="$ac_cv_path_NM"
 echo "$ac_t""$NM" 1>&6
 
-
 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1609: checking whether ln -s works" >&5
+echo "configure:1607: checking whether ln -s works" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1626,6 +1624,11 @@ else
 fi
 
 
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
 # Check for any special flags to pass to ltconfig.
 libtool_flags="--cache-file=$cache_file"
 test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
@@ -1646,11 +1649,11 @@ test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
 
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
-case "$host" in
+case "$lt_target" in
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 1653 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:1654: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  echo '#line 1656 "configure"' > conftest.$ac_ext
+  if { (eval echo configure:1657: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
     case "`/usr/bin/file conftest.o`" in
     *32-bit*)
       LD="${LD-ld} -32"
@@ -1671,19 +1674,19 @@ case "$host" in
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
   echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1675: checking whether the C compiler needs -belf" >&5
+echo "configure:1678: checking whether the C compiler needs -belf" >&5
 if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1680 "configure"
+#line 1683 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:1687: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1690: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   lt_cv_cc_needs_belf=yes
 else
@@ -1761,7 +1764,7 @@ LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
 LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
 DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
 ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
 || { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
 
 # Reload cache, that may have been modified by ltconfig
@@ -1785,7 +1788,7 @@ LIBTOOL='$(SHELL) $(top_builddir)/libtool'
 exec 5>>./config.log
 
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1789: checking how to run the C preprocessor" >&5
+echo "configure:1792: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -1800,13 +1803,13 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 1804 "configure"
+#line 1807 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1810: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1813: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1817,13 +1820,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 1821 "configure"
+#line 1824 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1827: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1830: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1834,13 +1837,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -nologo -E"
   cat > conftest.$ac_ext <<EOF
-#line 1838 "configure"
+#line 1841 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1844: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1847: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1870,7 +1873,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1874: checking for $ac_word" >&5
+echo "configure:1877: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1903,7 +1906,7 @@ test -n "$LEX" || LEX=""$missing_dir/missing flex""
 # Extract the first word of "flex", so it can be a program name with args.
 set dummy flex; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1907: checking for $ac_word" >&5
+echo "configure:1910: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1937,7 +1940,7 @@ then
   *) ac_lib=l ;;
   esac
   echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:1941: checking for yywrap in -l$ac_lib" >&5
+echo "configure:1944: checking for yywrap in -l$ac_lib" >&5
 ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1945,7 +1948,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-l$ac_lib  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 1949 "configure"
+#line 1952 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -1956,7 +1959,7 @@ int main() {
 yywrap()
 ; return 0; }
 EOF
-if { (eval echo configure:1960: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1963: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -1979,7 +1982,7 @@ fi
 fi
 
 echo $ac_n "checking lex output file root""... $ac_c" 1>&6
-echo "configure:1983: checking lex output file root" >&5
+echo "configure:1986: checking lex output file root" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2000,7 +2003,7 @@ echo "$ac_t""$ac_cv_prog_lex_root" 1>&6
 LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
 
 echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
-echo "configure:2004: checking whether yytext is a pointer" >&5
+echo "configure:2007: checking whether yytext is a pointer" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2012,14 +2015,14 @@ echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c
 ac_save_LIBS="$LIBS"
 LIBS="$LIBS $LEXLIB"
 cat > conftest.$ac_ext <<EOF
-#line 2016 "configure"
+#line 2019 "configure"
 #include "confdefs.h"
 `cat $LEX_OUTPUT_ROOT.c`
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:2023: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2026: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_prog_lex_yytext_pointer=yes
 else
@@ -2045,7 +2048,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2049: checking for $ac_word" >&5
+echo "configure:2052: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2102,7 +2105,7 @@ fi
 
 
 echo $ac_n "checking size of long""... $ac_c" 1>&6
-echo "configure:2106: checking size of long" >&5
+echo "configure:2109: checking size of long" >&5
 if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2110,7 +2113,7 @@ else
   ac_cv_sizeof_long=4
 else
   cat > conftest.$ac_ext <<EOF
-#line 2114 "configure"
+#line 2117 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 main()
@@ -2121,7 +2124,7 @@ main()
   exit(0);
 }
 EOF
-if { (eval echo configure:2125: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2128: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_sizeof_long=`cat conftestval`
 else
@@ -2141,7 +2144,7 @@ EOF
 
 
 echo $ac_n "checking size of long long""... $ac_c" 1>&6
-echo "configure:2145: checking size of long long" >&5
+echo "configure:2148: checking size of long long" >&5
 if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2149,7 +2152,7 @@ else
   ac_cv_sizeof_long_long=8
 else
   cat > conftest.$ac_ext <<EOF
-#line 2153 "configure"
+#line 2156 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 main()
@@ -2160,7 +2163,7 @@ main()
   exit(0);
 }
 EOF
-if { (eval echo configure:2164: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2167: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_sizeof_long_long=`cat conftestval`
 else
@@ -2180,7 +2183,7 @@ EOF
 
 
 echo $ac_n "checking size of long double""... $ac_c" 1>&6
-echo "configure:2184: checking size of long double" >&5
+echo "configure:2187: checking size of long double" >&5
 if eval "test \"`echo '$''{'ac_cv_sizeof_long_double'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2188,7 +2191,7 @@ else
   ac_cv_sizeof_long_double=12
 else
   cat > conftest.$ac_ext <<EOF
-#line 2192 "configure"
+#line 2195 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 main()
@@ -2199,7 +2202,7 @@ main()
   exit(0);
 }
 EOF
-if { (eval echo configure:2203: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2206: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_sizeof_long_double=`cat conftestval`
 else
@@ -2231,17 +2234,17 @@ for ac_hdr in unistd.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2235: checking for $ac_hdr" >&5
+echo "configure:2238: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2240 "configure"
+#line 2243 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2245: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2248: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2271,17 +2274,17 @@ for ac_hdr in readline/readline.h readline/history.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2275: checking for $ac_hdr" >&5
+echo "configure:2278: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2280 "configure"
+#line 2283 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2285: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2288: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2309,7 +2312,7 @@ done
 
 save_LIBS=$LIBS
 echo $ac_n "checking for readline in -lreadline""... $ac_c" 1>&6
-echo "configure:2313: checking for readline in -lreadline" >&5
+echo "configure:2316: checking for readline in -lreadline" >&5
 ac_lib_var=`echo readline'_'readline | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2317,7 +2320,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lreadline  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 2321 "configure"
+#line 2324 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
@@ -2331,7 +2334,7 @@ int main() {
 readline()
 ; return 0; }
 EOF
-if { (eval echo configure:2335: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2338: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -2363,7 +2366,7 @@ LIBS=$save_LIBS
 
 
 echo $ac_n "checking for cout in -lstdc++""... $ac_c" 1>&6
-echo "configure:2367: checking for cout in -lstdc++" >&5
+echo "configure:2370: checking for cout in -lstdc++" >&5
 ac_lib_var=`echo stdc++'_'cout | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2371,7 +2374,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lstdc++  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 2375 "configure"
+#line 2378 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
@@ -2385,7 +2388,7 @@ int main() {
 cout()
 ; return 0; }
 EOF
-if { (eval echo configure:2389: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2392: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -2417,17 +2420,17 @@ for ac_hdr in iostream vector map string list typeinfo iterator stdexcept algori
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2421: checking for $ac_hdr" >&5
+echo "configure:2424: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2426 "configure"
+#line 2429 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2431: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2434: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2458,17 +2461,17 @@ for ac_hdr in sstream strstream
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2462: checking for $ac_hdr" >&5
+echo "configure:2465: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2467 "configure"
+#line 2470 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2472: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2475: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2500,17 +2503,17 @@ done
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2504: checking for $ac_hdr" >&5
+echo "configure:2507: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2509 "configure"
+#line 2512 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2514: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2517: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2537,17 +2540,17 @@ for ac_hdr in cln.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2541: checking for $ac_hdr" >&5
+echo "configure:2544: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2546 "configure"
+#line 2549 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2551: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2554: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2582,7 +2585,7 @@ done
 
 
     echo $ac_n "checking for doublefactorial in -lcln""... $ac_c" 1>&6
-echo "configure:2586: checking for doublefactorial in -lcln" >&5
+echo "configure:2589: checking for doublefactorial in -lcln" >&5
     saved_LIBS="${LIBS}"
     if eval "test \"`echo '$''{'ginac_cv_lib_cln_link'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2591,14 +2594,14 @@ else
         case "${ac_cv_header_cln_cln_h}" in
         "yes")
             cat > conftest.$ac_ext <<EOF
-#line 2595 "configure"
+#line 2598 "configure"
 #include "confdefs.h"
 #include <cln/cln.h>
 int main() {
 doublefactorial(2);
 ; return 0; }
 EOF
-if { (eval echo configure:2602: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2605: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ginac_cv_lib_cln_link="-lcln"
 else
@@ -2611,14 +2614,14 @@ rm -f conftest*
             ;;
         *)
             cat > conftest.$ac_ext <<EOF
-#line 2615 "configure"
+#line 2618 "configure"
 #include "confdefs.h"
 #include <cln.h>
 int main() {
 doublefactorial(2);
 ; return 0; }
 EOF
-if { (eval echo configure:2622: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2625: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ginac_cv_lib_cln_link="-lcln"
 else
@@ -2658,7 +2661,7 @@ GINACLIB_LIBS=$LIBS
 # Extract the first word of "doxygen", so it can be a program name with args.
 set dummy doxygen; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2662: checking for $ac_word" >&5
+echo "configure:2665: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_DOXYGEN'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2694,7 +2697,7 @@ fi
 # Extract the first word of "latex", so it can be a program name with args.
 set dummy latex; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2698: checking for $ac_word" >&5
+echo "configure:2701: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_LATEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2730,7 +2733,7 @@ fi
 # Extract the first word of "makeindex", so it can be a program name with args.
 set dummy makeindex; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2734: checking for $ac_word" >&5
+echo "configure:2737: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MAKEINDEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2766,7 +2769,7 @@ fi
 # Extract the first word of "dvips", so it can be a program name with args.
 set dummy dvips; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2770: checking for $ac_word" >&5
+echo "configure:2773: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_DVIPS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2802,7 +2805,7 @@ fi
 # Extract the first word of "fig2dev", so it can be a program name with args.
 set dummy fig2dev; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2806: checking for $ac_word" >&5
+echo "configure:2809: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_FIG2DEV'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2870,7 +2873,7 @@ if [ "x$with_cint" != "xno" ]; then
   # Extract the first word of "cint", so it can be a program name with args.
 set dummy cint; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2874: checking for $ac_word" >&5
+echo "configure:2877: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_CINT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2906,7 +2909,7 @@ fi
   # Extract the first word of "makecint", so it can be a program name with args.
 set dummy makecint; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2910: checking for $ac_word" >&5
+echo "configure:2913: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MAKECINT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3144,8 +3147,6 @@ s%@build_vendor@%$build_vendor%g
 s%@build_os@%$build_os%g
 s%@RANLIB@%$RANLIB%g
 s%@CC@%$CC%g
-s%@LD@%$LD%g
-s%@NM@%$NM%g
 s%@LN_S@%$LN_S%g
 s%@LIBTOOL@%$LIBTOOL%g
 s%@LEX@%$LEX%g

diff --git a/doc/Makefile.in b/doc/Makefile.in
index 6fa6eccbcc4d065f8c97e0f9c5206e1e1880f028..e153dbe7ffe94a43a8b424341aeb413ae9e42743 100644 (file)
--- a/doc/Makefile.in
+++ b/doc/Makefile.in
@@ -82,7 +82,6 @@ GINACLIB_MINOR_VERSION = @GINACLIB_MINOR_VERSION@
 GINACLIB_VERSION = @GINACLIB_VERSION@
 GINSH_LIBS = @GINSH_LIBS@
 LATEX = @LATEX@
-LD = @LD@
 LEX = @LEX@
 LIBGINACCINT = @LIBGINACCINT@
 LIBTOOL = @LIBTOOL@
@@ -95,7 +94,6 @@ MAINT = @MAINT@
 MAKECINT = @MAKECINT@
 MAKEINDEX = @MAKEINDEX@
 MAKEINFO = @MAKEINFO@
-NM = @NM@
 OBJDUMP = @OBJDUMP@
 PACKAGE = @PACKAGE@
 RANLIB = @RANLIB@

diff --git a/doc/reference/Makefile.in b/doc/reference/Makefile.in
index d9e8155508af5860ce0d00719639176899481bb2..3ed3518b544ba472e3fa109ee6ecf5af2a765be3 100644 (file)
--- a/doc/reference/Makefile.in
+++ b/doc/reference/Makefile.in
@@ -85,7 +85,6 @@ GINACLIB_MINOR_VERSION = @GINACLIB_MINOR_VERSION@
 GINACLIB_VERSION = @GINACLIB_VERSION@
 GINSH_LIBS = @GINSH_LIBS@
 LATEX = @LATEX@
-LD = @LD@
 LEX = @LEX@
 LIBGINACCINT = @LIBGINACCINT@
 LIBTOOL = @LIBTOOL@
@@ -98,7 +97,6 @@ MAINT = @MAINT@
 MAKECINT = @MAKECINT@
 MAKEINDEX = @MAKEINDEX@
 MAKEINFO = @MAKEINFO@
-NM = @NM@
 OBJDUMP = @OBJDUMP@
 PACKAGE = @PACKAGE@
 RANLIB = @RANLIB@

diff --git a/doc/tutorial/Makefile.in b/doc/tutorial/Makefile.in
index 16fc4f9397a62c9624d8a795c7f010feffccc64a..0964c1aaf165b5f7cbfc299fdcdf453597deff96 100644 (file)
--- a/doc/tutorial/Makefile.in
+++ b/doc/tutorial/Makefile.in
@@ -84,7 +84,6 @@ GINACLIB_MINOR_VERSION = @GINACLIB_MINOR_VERSION@
 GINACLIB_VERSION = @GINACLIB_VERSION@
 GINSH_LIBS = @GINSH_LIBS@
 LATEX = @LATEX@
-LD = @LD@
 LEX = @LEX@
 LIBGINACCINT = @LIBGINACCINT@
 LIBTOOL = @LIBTOOL@
@@ -97,7 +96,6 @@ MAINT = @MAINT@
 MAKECINT = @MAKECINT@
 MAKEINDEX = @MAKEINDEX@
 MAKEINFO = @MAKEINFO@
-NM = @NM@
 OBJDUMP = @OBJDUMP@
 PACKAGE = @PACKAGE@
 RANLIB = @RANLIB@

diff --git a/ginac/Makefile.in b/ginac/Makefile.in
index e9eff67cb3e3005ef1a414b6cad7fc081d3ae668..a5be0fede6fd9c8ad80d16474dab6865aa2d5716 100644 (file)
--- a/ginac/Makefile.in
+++ b/ginac/Makefile.in
@@ -82,7 +82,6 @@ GINACLIB_MINOR_VERSION = @GINACLIB_MINOR_VERSION@
 GINACLIB_VERSION = @GINACLIB_VERSION@
 GINSH_LIBS = @GINSH_LIBS@
 LATEX = @LATEX@
-LD = @LD@
 LEX = @LEX@
 LIBGINACCINT = @LIBGINACCINT@
 LIBTOOL = @LIBTOOL@
@@ -95,7 +94,6 @@ MAINT = @MAINT@
 MAKECINT = @MAKECINT@
 MAKEINDEX = @MAKEINDEX@
 MAKEINFO = @MAKEINFO@
-NM = @NM@
 OBJDUMP = @OBJDUMP@
 PACKAGE = @PACKAGE@
 RANLIB = @RANLIB@

diff --git a/ginsh/Makefile.in b/ginsh/Makefile.in
index 8d73e2b4482a126369b121575d63e70fab68b523..52d940220ac4d3ddc67813f16567fbef3c3f97b4 100644 (file)
--- a/ginsh/Makefile.in
+++ b/ginsh/Makefile.in
@@ -82,7 +82,6 @@ GINACLIB_MINOR_VERSION = @GINACLIB_MINOR_VERSION@
 GINACLIB_VERSION = @GINACLIB_VERSION@
 GINSH_LIBS = @GINSH_LIBS@
 LATEX = @LATEX@
-LD = @LD@
 LEX = @LEX@
 LIBGINACCINT = @LIBGINACCINT@
 LIBTOOL = @LIBTOOL@
@@ -95,7 +94,6 @@ MAINT = @MAINT@
 MAKECINT = @MAKECINT@
 MAKEINDEX = @MAKEINDEX@
 MAKEINFO = @MAKEINFO@
-NM = @NM@
 OBJDUMP = @OBJDUMP@
 PACKAGE = @PACKAGE@
 RANLIB = @RANLIB@

diff --git a/tools/Makefile.in b/tools/Makefile.in
index a0a6800239f772dd609bccedf213d3df81fa64fe..13f92f31a94be4684566f1e8df042592347dc1ba 100644 (file)
--- a/tools/Makefile.in
+++ b/tools/Makefile.in
@@ -82,7 +82,6 @@ GINACLIB_MINOR_VERSION = @GINACLIB_MINOR_VERSION@
 GINACLIB_VERSION = @GINACLIB_VERSION@
 GINSH_LIBS = @GINSH_LIBS@
 LATEX = @LATEX@
-LD = @LD@
 LEX = @LEX@
 LIBGINACCINT = @LIBGINACCINT@
 LIBTOOL = @LIBTOOL@
@@ -95,7 +94,6 @@ MAINT = @MAINT@
 MAKECINT = @MAKECINT@
 MAKEINDEX = @MAKEINDEX@
 MAKEINFO = @MAKEINFO@
-NM = @NM@
 OBJDUMP = @OBJDUMP@
 PACKAGE = @PACKAGE@
 RANLIB = @RANLIB@