-# Makefile.in generated automatically by automake 1.3 from Makefile.am
+# Makefile.in generated automatically by automake 1.4 from Makefile.am
-# Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# PARTICULAR PURPOSE.
-SHELL = /bin/sh
+SHELL = @SHELL@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
includedir = @includedir@
oldincludedir = /usr/include
-DISTDIR =
+DESTDIR =
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
AUTOHEADER = @AUTOHEADER@
INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@
POST_UNINSTALL = :
host_alias = @host_alias@
host_triplet = @host@
+AS = @AS@
CC = @CC@
CXX = @CXX@
CXXCPP = @CXXCPP@
+DLLTOOL = @DLLTOOL@
DOXYGEN = @DOXYGEN@
DVIPS = @DVIPS@
FIG2DEV = @FIG2DEV@
MAKEINDEX = @MAKEINDEX@
MAKEINFO = @MAKEINFO@
NM = @NM@
+OBJDUMP = @OBJDUMP@
PACKAGE = @PACKAGE@
RANLIB = @RANLIB@
REFERENCE_TARGETS = @REFERENCE_TARGETS@
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = GiNaC.spec
-DIST_COMMON = README AUTHORS COPYING ChangeLog GiNaC.spec.in INSTALL \
-Makefile.am Makefile.in NEWS acconfig.h acinclude.m4 aclocal.m4 \
-config.guess config.h.in config.sub configure configure.in install-sh \
-ltconfig ltmain.sh missing mkinstalldirs stamp-h.in
+DIST_COMMON = README ./stamp-h.in AUTHORS COPYING ChangeLog \
+GiNaC.spec.in INSTALL Makefile.am Makefile.in NEWS acconfig.h \
+acinclude.m4 aclocal.m4 config.guess config.h.in config.sub configure \
+configure.in install-sh ltconfig ltmain.sh missing mkinstalldirs
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
TAR = tar
-GZIP = --best
-all: all-recursive-am all-am
-
+GZIP_ENV = --best
+all: all-redirect
.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINT@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
cd $(top_builddir) \
&& CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-$(ACLOCAL_M4): @MAINT@ configure.in acinclude.m4
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in acinclude.m4
cd $(srcdir) && $(ACLOCAL)
-config.status: $(srcdir)/configure
+config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINT@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
cd $(srcdir) && $(AUTOCONF)
config.h: stamp-h
- @:
+ @if test ! -f $@; then \
+ rm -f stamp-h; \
+ $(MAKE) stamp-h; \
+ else :; fi
stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
cd $(top_builddir) \
&& CONFIG_FILES= CONFIG_HEADERS=config.h \
$(SHELL) ./config.status
- @echo timestamp > stamp-h
-$(srcdir)/config.h.in: @MAINT@$(srcdir)/stamp-h.in
+ @echo timestamp > stamp-h 2> /dev/null
+$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@$(srcdir)/stamp-h.in
+ @if test ! -f $@; then \
+ rm -f $(srcdir)/stamp-h.in; \
+ $(MAKE) $(srcdir)/stamp-h.in; \
+ else :; fi
$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h
cd $(top_srcdir) && $(AUTOHEADER)
- @echo timestamp > $(srcdir)/stamp-h.in
+ @echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null
mostlyclean-hdr:
maintainer-clean-hdr:
GiNaC.spec: $(top_builddir)/config.status GiNaC.spec.in
- cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= ./config.status
+ cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
installdirs-recursive install-recursive uninstall-recursive \
check-recursive installcheck-recursive info-recursive dvi-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
- target=`echo $@ | sed s/-recursive//`; \
echo "Making $$target in $$subdir"; \
- (cd $$subdir && $(MAKE) $$target) \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
- done && test -z "$$fail"
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
+ dot_seen=no; \
rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
rev="$$subdir $$rev"; \
+ test "$$subdir" = "." && dot_seen=yes; \
done; \
+ test "$$dot_seen" = "no" && rev=". $$rev"; \
+ target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
- target=`echo $@ | sed s/-recursive//`; \
echo "Making $$target in $$subdir"; \
- (cd $$subdir && $(MAKE) $$target) \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
- (cd $$subdir && $(MAKE) tags); \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
tags: TAGS
ID: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS)'; \
+ unique=`for i in $$list; do echo $$i; done | \
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
here=`pwd` && cd $(srcdir) \
- && mkid -f$$here/ID $(SOURCES) $(HEADERS) $(LISP)
+ && mkid -f$$here/ID $$unique $(LISP)
TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
- test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+ if test "$$subdir" = .; then :; else \
+ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+ fi; \
done; \
list='$(SOURCES) $(HEADERS)'; \
unique=`for i in $$list; do echo $$i; done | \
# tarfile.
distcheck: dist
-rm -rf $(distdir)
- GZIP=$(GZIP) $(TAR) zxf $(distdir).tar.gz
+ GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
mkdir $(distdir)/=build
mkdir $(distdir)/=inst
dc_install_base=`cd $(distdir)/=inst && pwd`; \
cd $(distdir)/=build \
&& ../configure --srcdir=.. --prefix=$$dc_install_base \
- && $(MAKE) \
- && $(MAKE) dvi \
- && $(MAKE) check \
- && $(MAKE) install \
- && $(MAKE) installcheck \
- && $(MAKE) dist
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) dist
-rm -rf $(distdir)
- @echo "========================"; \
- echo "$(distdir).tar.gz is ready for distribution"; \
- echo "========================"
+ @banner="$(distdir).tar.gz is ready for distribution"; \
+ dashes=`echo "$$banner" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ echo "$$dashes"
dist: distdir
-chmod -R a+r $(distdir)
- GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
+ GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-rm -rf $(distdir)
dist-all: distdir
-chmod -R a+r $(distdir)
- GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
+ GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-rm -rf $(distdir)
distdir: $(DISTFILES)
-rm -rf $(distdir)
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu Makefile
@for file in $(DISTFILES); do \
d=$(srcdir); \
- test -f $(distdir)/$$file \
- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
- || cp -p $$d/$$file $(distdir)/$$file; \
+ if test -d $$d/$$file; then \
+ cp -pr $$d/$$file $(distdir)/$$file; \
+ else \
+ test -f $(distdir)/$$file \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
done
for subdir in $(SUBDIRS); do \
- test -d $(distdir)/$$subdir \
- || mkdir $(distdir)/$$subdir \
- || exit 1; \
- chmod 777 $(distdir)/$$subdir; \
- (cd $$subdir && $(MAKE) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
+ if test "$$subdir" = .; then :; else \
+ test -d $(distdir)/$$subdir \
+ || mkdir $(distdir)/$$subdir \
|| exit 1; \
+ chmod 777 $(distdir)/$$subdir; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
+ || exit 1; \
+ fi; \
done
+info-am:
info: info-recursive
+dvi-am:
dvi: dvi-recursive
-check: all-am
- $(MAKE) check-recursive
+check-am: all-am
+check: check-recursive
+installcheck-am:
installcheck: installcheck-recursive
all-recursive-am: config.h
- $(MAKE) all-recursive
-
-all-am: Makefile config.h
+ $(MAKE) $(AM_MAKEFLAGS) all-recursive
+install-exec-am:
install-exec: install-exec-recursive
- @$(NORMAL_INSTALL)
+install-data-am:
install-data: install-data-recursive
- @$(NORMAL_INSTALL)
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
- @:
-
+uninstall-am:
uninstall: uninstall-recursive
-
+all-am: Makefile config.h
+all-redirect: all-recursive-am
install-strip:
- $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
+ $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
+installdirs-am:
mostlyclean-generic:
- -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
clean-generic:
- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
- -rm -f Makefile $(DISTCLEANFILES)
+ -rm -f Makefile $(CONFIG_CLEAN_FILES)
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
- -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
mostlyclean-am: mostlyclean-hdr mostlyclean-tags mostlyclean-generic
-clean-am: clean-hdr clean-tags clean-generic mostlyclean-am
-
-distclean-am: distclean-hdr distclean-tags distclean-generic clean-am
+mostlyclean: mostlyclean-recursive
-maintainer-clean-am: maintainer-clean-hdr maintainer-clean-tags \
- maintainer-clean-generic distclean-am
+clean-am: clean-hdr clean-tags clean-generic mostlyclean-am
-mostlyclean: mostlyclean-recursive mostlyclean-am
+clean: clean-recursive
-clean: clean-recursive clean-am
+distclean-am: distclean-hdr distclean-tags distclean-generic clean-am
+ -rm -f libtool
-distclean: distclean-recursive distclean-am
+distclean: distclean-recursive
-rm -f config.status
- -rm -f libtool
-maintainer-clean: maintainer-clean-recursive maintainer-clean-am
+maintainer-clean-am: maintainer-clean-hdr maintainer-clean-tags \
+ maintainer-clean-generic distclean-am
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-recursive
-rm -f config.status
.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
all-recursive check-recursive installcheck-recursive info-recursive \
dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir info dvi \
-installcheck all-recursive-am all-am install-exec install-data install \
-uninstall all installdirs mostlyclean-generic distclean-generic \
-clean-generic maintainer-clean-generic clean mostlyclean distclean \
-maintainer-clean
+distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \
+install-exec-am install-exec install-data-am install-data install-am \
+install uninstall-am uninstall all-redirect all-am all installdirs-am \
+installdirs mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
# Tell versions [3.59,3.63) of GNU make to not export all variables.
-dnl aclocal.m4 generated automatically by aclocal 1.3
+dnl aclocal.m4 generated automatically by aclocal 1.4
-dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
-dnl This Makefile.in is free software; the Free Software Foundation
+dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
dnl gives unlimited permission to copy and/or distribute it,
dnl with or without modifications, as long as this notice is preserved.
dnl AM_INIT_AUTOMAKE(package,version, [no-define])
AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AM_PROG_INSTALL])
+[AC_REQUIRE([AC_PROG_INSTALL])
PACKAGE=[$1]
AC_SUBST(PACKAGE)
VERSION=[$2]
AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
fi
ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE")
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION"))
+AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
AC_REQUIRE([AM_SANITY_CHECK])
AC_REQUIRE([AC_ARG_PROGRAM])
dnl FIXME This is truly gross.
AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-# serial 1
-
-AC_DEFUN(AM_PROG_INSTALL,
-[AC_REQUIRE([AC_PROG_INSTALL])
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-AC_SUBST(INSTALL_SCRIPT)dnl
-])
-
#
# Check to make sure that the build environment is sane.
#
USE_MAINTAINER_MODE=$enableval,
USE_MAINTAINER_MODE=no)
AC_MSG_RESULT($USE_MAINTAINER_MODE)
- if test $USE_MAINTAINER_MODE = yes; then
- MAINT=
- else
- MAINT='#M#'
- fi
+ AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
+ MAINT=$MAINTAINER_MODE_TRUE
AC_SUBST(MAINT)dnl
]
)
+# Define a conditional.
+
+AC_DEFUN(AM_CONDITIONAL,
+[AC_SUBST($1_TRUE)
+AC_SUBST($1_FALSE)
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi])
-# serial 24 AM_PROG_LIBTOOL
-AC_DEFUN(AM_PROG_LIBTOOL,
-[AC_REQUIRE([AM_ENABLE_SHARED])dnl
-AC_REQUIRE([AM_ENABLE_STATIC])dnl
+
+# serial 40 AC_PROG_LIBTOOL
+AC_DEFUN(AC_PROG_LIBTOOL,
+[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+
+# Save cache, so that ltconfig can load it
+AC_CACHE_SAVE
+
+# Actually configure libtool. ac_aux_dir is where install-sh is found.
+CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+|| AC_MSG_ERROR([libtool configure failed])
+
+# Reload cache, that may have been modified by ltconfig
+AC_CACHE_LOAD
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+])
+
+AC_DEFUN(AC_LIBTOOL_SETUP,
+[AC_PREREQ(2.13)dnl
+AC_REQUIRE([AC_ENABLE_SHARED])dnl
+AC_REQUIRE([AC_ENABLE_STATIC])dnl
+AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AM_PROG_LD])dnl
-AC_REQUIRE([AM_PROG_NM])dnl
+AC_REQUIRE([AC_PROG_LD])dnl
+AC_REQUIRE([AC_PROG_NM])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
# Check for any special flags to pass to ltconfig.
-libtool_flags=
+libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
+test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+[libtool_flags="$libtool_flags --enable-dlopen"])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[libtool_flags="$libtool_flags --enable-win32-dll"])
+AC_ARG_ENABLE(libtool-lock,
+ [ --disable-libtool-lock avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
+ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+ [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
;;
-esac
-# Actually configure libtool. ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw*)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
+ ;;
+])
+esac
])
-# AM_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AM_ENABLE_SHARED[(DEFAULT)]
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
+
+# AC_ENABLE_SHARED - implement the --enable-shared flag
+# Usage: AC_ENABLE_SHARED[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AM_ENABLE_SHARED,
-[define([AM_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_SHARED, [dnl
+define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
-<< --enable-shared build shared libraries [default=>>AM_ENABLE_SHARED_DEFAULT]
+<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
changequote([, ])dnl
-[ --enable-shared=PKGS only build shared libraries if the current package
- appears as an element in the PKGS list],
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_shared=yes ;;
IFS="$ac_save_ifs"
;;
esac],
-enable_shared=AM_ENABLE_SHARED_DEFAULT)dnl
+enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
])
-# AM_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AM_DISABLE_SHARED,
-[AM_ENABLE_SHARED(no)])
-
-# AM_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AM_DISABLE_STATIC,
-[AM_ENABLE_STATIC(no)])
+# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
+AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
-# AM_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AM_ENABLE_STATIC[(DEFAULT)]
+# AC_ENABLE_STATIC - implement the --enable-static flag
+# Usage: AC_ENABLE_STATIC[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AM_ENABLE_STATIC,
-[define([AM_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_STATIC, [dnl
+define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
-<< --enable-static build static libraries [default=>>AM_ENABLE_STATIC_DEFAULT]
+<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
changequote([, ])dnl
-[ --enable-static=PKGS only build shared libraries if the current package
- appears as an element in the PKGS list],
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_static=yes ;;
IFS="$ac_save_ifs"
;;
esac],
-enable_static=AM_ENABLE_STATIC_DEFAULT)dnl
+enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
])
+# AC_DISABLE_STATIC - set the default static flag to --disable-static
+AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
-# AM_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN(AM_PROG_LD,
+
+# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
+# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
+define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(fast-install,
+changequote(<<, >>)dnl
+<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
+])
+
+# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
+AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
+
+# AC_PROG_LD - find the path to the GNU or non-GNU linker
+AC_DEFUN(AC_PROG_LD,
[AC_ARG_WITH(gnu-ld,
[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by GCC])
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
- # Accept absolute paths.
- /* | [A-Za-z]:\\*)
- test -z "$LD" && LD="$ac_prog"
- ;;
+ # Accept absolute paths.
+changequote(,)dnl
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+changequote([,])dnl
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog"; then
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
- test "$with_gnu_ld" != yes && break
+ test "$with_gnu_ld" != yes && break
fi
fi
done
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_SUBST(LD)
-AM_PROG_LD_GNU
+AC_PROG_LD_GNU
])
-AC_DEFUN(AM_PROG_LD_GNU,
+AC_DEFUN(AC_PROG_LD_GNU,
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
fi])
])
-# AM_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN(AM_PROG_NM,
+# AC_PROG_NM - find the path to a BSD-compatible name lister
+AC_DEFUN(AC_PROG_NM,
[AC_MSG_CHECKING([for BSD-compatible nm])
AC_CACHE_VAL(ac_cv_path_NM,
-[case "$NM" in
-/* | [A-Za-z]:\\*)
- ac_cv_path_NM="$NM" # Let the user override the test with a path.
- ;;
-*)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do
+[if test -n "$NM"; then
+ # Let the user override the test.
+ ac_cv_path_NM="$NM"
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm; then
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -B"
+ ac_cv_path_NM="$ac_dir/nm -B"
+ break
elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -p"
+ ac_cv_path_NM="$ac_dir/nm -p"
+ break
else
- ac_cv_path_NM="$ac_dir/nm"
+ ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
fi
- break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
- ;;
-esac])
+fi])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
AC_SUBST(NM)
])
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN(AC_CHECK_LIBM,
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case "$host" in
+*-*-beos* | *-*-cygwin*)
+ # These system don't have libm
+ ;;
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
+ ;;
+*)
+ AC_CHECK_LIB(m, main, LIBM="-lm")
+ ;;
+esac
+])
+
+# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl convenience library, adds --enable-ltdl-convenience to
+# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
+# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
+# to be `${top_builddir}/libltdl'. Make sure you start DIR with
+# '${top_builddir}/' (note the single quotes!) if your package is not
+# flat, and, if you're not using automake, define top_builddir as
+# appropriate in the Makefiles.
+AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ case "$enable_ltdl_convenience" in
+ no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+ "") enable_ltdl_convenience=yes
+ ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+ esac
+ LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
+ INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+])
+
+# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl installable library, and adds --enable-ltdl-install to
+# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
+# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
+# to be `${top_builddir}/libltdl'. Make sure you start DIR with
+# '${top_builddir}/' (note the single quotes!) if your package is not
+# flat, and, if you're not using automake, define top_builddir as
+# appropriate in the Makefiles.
+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ AC_CHECK_LIB(ltdl, main,
+ [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+ [if test x"$enable_ltdl_install" = xno; then
+ AC_MSG_WARN([libltdl not installed, but installation disabled])
+ else
+ enable_ltdl_install=yes
+ fi
+ ])
+ if test x"$enable_ltdl_install" = x"yes"; then
+ ac_configure_args="$ac_configure_args --enable-ltdl-install"
+ LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
+ INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+ else
+ ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+ LIBLTDL="-lltdl"
+ INCLTDL=
+ fi
+])
+
+dnl old names
+AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
+AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
+AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
+AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
+AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
+AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
+AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
+
+dnl This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])dnl
+
dnl AM_PROG_LEX
dnl Look for flex, lex or missing, then run AC_PROG_LEX and AC_DECL_YYTEXT
-# Makefile.in generated automatically by automake 1.3 from Makefile.am
+# Makefile.in generated automatically by automake 1.4 from Makefile.am
-# Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# PARTICULAR PURPOSE.
-SHELL = /bin/sh
+SHELL = @SHELL@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
includedir = @includedir@
oldincludedir = /usr/include
-DISTDIR =
+DESTDIR =
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
AUTOHEADER = @AUTOHEADER@
INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@
POST_UNINSTALL = :
host_alias = @host_alias@
host_triplet = @host@
+AS = @AS@
CC = @CC@
CXX = @CXX@
CXXCPP = @CXXCPP@
+DLLTOOL = @DLLTOOL@
DOXYGEN = @DOXYGEN@
DVIPS = @DVIPS@
FIG2DEV = @FIG2DEV@
MAKEINDEX = @MAKEINDEX@
MAKEINFO = @MAKEINFO@
NM = @NM@
+OBJDUMP = @OBJDUMP@
PACKAGE = @PACKAGE@
RANLIB = @RANLIB@
REFERENCE_TARGETS = @REFERENCE_TARGETS@
TESTS = run_checks
check_PROGRAMS = check_ginac
-check_ginac_SOURCES = paranoia_check.cpp numeric_output.cpp numeric_consist.cpp \
- powerlaws.cpp expand_subs.cpp inifcns_consist.cpp differentiation.cpp \
- poly_gcd.cpp normalization.cpp lsolve_onedim.cpp matrix_checks.cpp \
- series_expansion.cpp fcntimer.cpp main.cpp check.h
+check_ginac_SOURCES = paranoia_check.cpp numeric_output.cpp numeric_consist.cpp powerlaws.cpp expand_subs.cpp inifcns_consist.cpp differentiation.cpp poly_gcd.cpp normalization.cpp lsolve_onedim.cpp matrix_checks.cpp series_expansion.cpp fcntimer.cpp main.cpp check.h
+
check_ginac_LDADD = ../ginac/libginac.la
CLEANFILES = result.out
EXTRA_DIST = result.ref run_checks
check_ginac_DEPENDENCIES = ../ginac/libginac.la
check_ginac_LDFLAGS =
CXXFLAGS = @CXXFLAGS@
-CXXCOMPILE = $(CXX) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CXXFLAGS)
-LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CXXFLAGS)
-CXXLINK = $(LIBTOOL) --mode=link $(CXX) $(CXXFLAGS) $(LDFLAGS) -o $@
+CXXCOMPILE = $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+CXXLD = $(CXX)
+CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(LDFLAGS) -o $@
+CFLAGS = @CFLAGS@
+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
DIST_COMMON = Makefile.am Makefile.in
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
TAR = tar
-GZIP = --best
+GZIP_ENV = --best
DEP_FILES = .deps/differentiation.P .deps/expand_subs.P \
.deps/fcntimer.P .deps/inifcns_consist.P .deps/lsolve_onedim.P \
.deps/main.P .deps/matrix_checks.P .deps/normalization.P \
.deps/numeric_consist.P .deps/numeric_output.P .deps/paranoia_check.P \
.deps/poly_gcd.P .deps/powerlaws.P .deps/series_expansion.P
-CXXMKDEP = $(CXX) -M $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CXXFLAGS)
SOURCES = $(check_ginac_SOURCES)
OBJECTS = $(check_ginac_OBJECTS)
-all: Makefile
-
+all: all-redirect
.SUFFIXES:
.SUFFIXES: .S .c .cpp .lo .o .s
-$(srcdir)/Makefile.in: @MAINT@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && $(AUTOMAKE) --gnu check/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
tags: TAGS
ID: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS)'; \
+ unique=`for i in $$list; do echo $$i; done | \
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
here=`pwd` && cd $(srcdir) \
- && mkid -f$$here/ID $(SOURCES) $(HEADERS) $(LISP)
+ && mkid -f$$here/ID $$unique $(LISP)
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
tags=; \
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu check/Makefile
@for file in $(DISTFILES); do \
d=$(srcdir); \
- test -f $(distdir)/$$file \
- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
- || cp -p $$d/$$file $(distdir)/$$file; \
+ if test -d $$d/$$file; then \
+ cp -pr $$d/$$file $(distdir)/$$file; \
+ else \
+ test -f $(distdir)/$$file \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
done
DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
clean-depend:
distclean-depend:
+ -rm -rf .deps
maintainer-clean-depend:
- -rm -rf .deps
%.o: %.c
@echo '$(COMPILE) -c $<'; \
- $(COMPILE) -Wp,-MD,.deps/$(*F).P -c $<
+ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+ @-cp .deps/$(*F).pp .deps/$(*F).P; \
+ tr ' ' '\012' < .deps/$(*F).pp \
+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+ >> .deps/$(*F).P; \
+ rm .deps/$(*F).pp
%.lo: %.c
@echo '$(LTCOMPILE) -c $<'; \
- $(LTCOMPILE) -Wp,-MD,.deps/$(*F).p -c $<
- @-sed -e 's/^\([^:]*\)\.o:/\1.lo \1.o:/' \
- < .deps/$(*F).p > .deps/$(*F).P
- @-rm -f .deps/$(*F).p
+ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
+ < .deps/$(*F).pp > .deps/$(*F).P; \
+ tr ' ' '\012' < .deps/$(*F).pp \
+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+ >> .deps/$(*F).P; \
+ rm -f .deps/$(*F).pp
%.o: %.cpp
@echo '$(CXXCOMPILE) -c $<'; \
- $(CXXCOMPILE) -Wp,-MD,.deps/$(*F).P -c $<
+ $(CXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+ @-cp .deps/$(*F).pp .deps/$(*F).P; \
+ tr ' ' '\012' < .deps/$(*F).pp \
+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+ >> .deps/$(*F).P; \
+ rm .deps/$(*F).pp
%.lo: %.cpp
@echo '$(LTCXXCOMPILE) -c $<'; \
- $(LTCXXCOMPILE) -Wp,-MD,.deps/$(*F).p -c $<
- @-sed -e 's/^\([^:]*\)\.o:/\1.lo \1.o:/' \
- < .deps/$(*F).p > .deps/$(*F).P
- @-rm -f .deps/$(*F).p
+ $(LTCXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
+ < .deps/$(*F).pp > .deps/$(*F).P; \
+ tr ' ' '\012' < .deps/$(*F).pp \
+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+ >> .deps/$(*F).P; \
+ rm -f .deps/$(*F).pp
check-TESTS: $(TESTS)
@failed=0; all=0; \
srcdir=$(srcdir); export srcdir; \
echo "$$banner"; \
echo "$$dashes"; \
test "$$failed" -eq 0
-info:
-dvi:
-check: all $(check_PROGRAMS)
- $(MAKE) check-TESTS
-installcheck:
-install-exec:
- @$(NORMAL_INSTALL)
-
-install-data:
- @$(NORMAL_INSTALL)
-
-install: install-exec install-data all
- @:
-
-uninstall:
-
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am:
+install-exec: install-exec-am
+
+install-data-am:
+install-data: install-data-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am:
+uninstall: uninstall-am
+all-am: Makefile
+all-redirect: all-am
install-strip:
- $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
+ $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs:
mostlyclean-generic:
- -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
- -rm -f Makefile $(DISTCLEANFILES)
+ -rm -f Makefile $(CONFIG_CLEAN_FILES)
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
- -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
-mostlyclean: mostlyclean-checkPROGRAMS mostlyclean-compile \
+mostlyclean-am: mostlyclean-checkPROGRAMS mostlyclean-compile \
mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
mostlyclean-generic
-clean: clean-checkPROGRAMS clean-compile clean-libtool clean-tags \
- clean-depend clean-generic mostlyclean
+mostlyclean: mostlyclean-am
-distclean: distclean-checkPROGRAMS distclean-compile distclean-libtool \
- distclean-tags distclean-depend distclean-generic clean
- -rm -f config.status
+clean-am: clean-checkPROGRAMS clean-compile clean-libtool clean-tags \
+ clean-depend clean-generic mostlyclean-am
+
+clean: clean-am
+
+distclean-am: distclean-checkPROGRAMS distclean-compile \
+ distclean-libtool distclean-tags distclean-depend \
+ distclean-generic clean-am
-rm -f libtool
-maintainer-clean: maintainer-clean-checkPROGRAMS \
+distclean: distclean-am
+
+maintainer-clean-am: maintainer-clean-checkPROGRAMS \
maintainer-clean-compile maintainer-clean-libtool \
maintainer-clean-tags maintainer-clean-depend \
- maintainer-clean-generic distclean
+ maintainer-clean-generic distclean-am
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
+maintainer-clean: maintainer-clean-am
+
.PHONY: mostlyclean-checkPROGRAMS distclean-checkPROGRAMS \
clean-checkPROGRAMS maintainer-clean-checkPROGRAMS mostlyclean-compile \
distclean-compile clean-compile maintainer-clean-compile \
mostlyclean-libtool distclean-libtool clean-libtool \
maintainer-clean-libtool tags mostlyclean-tags distclean-tags \
clean-tags maintainer-clean-tags distdir mostlyclean-depend \
-distclean-depend clean-depend maintainer-clean-depend check-TESTS info \
-dvi installcheck install-exec install-data install uninstall all \
-installdirs mostlyclean-generic distclean-generic clean-generic \
+distclean-depend clean-depend maintainer-clean-depend check-TESTS \
+info-am info dvi-am dvi check check-am installcheck-am installcheck \
+install-exec-am install-exec install-data-am install-data install-am \
+install uninstall-am uninstall all-redirect all-am all installdirs \
+mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean
/* Define if lex declares yytext as a char * by default, not a char[]. */
#undef YYTEXT_POINTER
-/* Define to the name of the distribution. */
-#undef PACKAGE
-
-/* Define to the version of the distribution. */
-#undef VERSION
-
/* The number of bytes in a long. */
#undef SIZEOF_LONG
/* Define if you have the stdc++ library (-lstdc++). */
#undef HAVE_LIBSTDC__
+
+/* Name of package */
+#undef PACKAGE
+
+/* Version number of package */
+#undef VERSION
+
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.12
+# Generated automatically using autoconf version 2.13
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer"
ac_help="$ac_help
- --enable-shared build shared libraries [default=yes]
- --enable-shared=PKGS only build shared libraries if the current package
- appears as an element in the PKGS list"
+ --enable-shared[=PKGS] build shared libraries [default=yes]"
ac_help="$ac_help
- --enable-static build static libraries [default=yes]
- --enable-static=PKGS only build shared libraries if the current package
- appears as an element in the PKGS list"
+ --enable-static[=PKGS] build static libraries [default=yes]"
+ac_help="$ac_help
+ --enable-fast-install[=PKGS] optimize for fast installation [default=yes]"
ac_help="$ac_help
--with-gnu-ld assume the C compiler uses GNU ld [default=no]"
+ac_help="$ac_help
+ --disable-libtool-lock avoid locking (might break parallel builds)"
# Initialize some variables set by options.
# The variables have the same names as the options, with
# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
# Maximum number of lines to put in a shell here document.
ac_max_here_lines=12
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.12"
+ echo "configure generated by autoconf version 2.13"
exit 0 ;;
-with-* | --with-*)
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
+ac_exeext=
+ac_objext=o
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:616: checking for a BSD compatible install" >&5
+echo "configure:620: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
for ac_dir in $PATH; do
# Account for people who put trailing slashes in PATH elements.
case "$ac_dir/" in
/|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
*)
# OSF1 and SCO ODT 3.0 have their own names for install.
- for ac_prog in ginstall installbsd scoinst install; do
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
if test -f $ac_dir/$ac_prog; then
if test $ac_prog = install &&
grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
- # OSF/1 installbsd also uses dspmsg, but is usable.
:
else
ac_cv_path_install="$ac_dir/$ac_prog -c"
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:669: checking whether build environment is sane" >&5
+echo "configure:673: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:726: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:730: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:772: checking for working aclocal" >&5
+echo "configure:776: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:785: checking for working autoconf" >&5
+echo "configure:789: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:798: checking for working automake" >&5
+echo "configure:802: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:811: checking for working autoheader" >&5
+echo "configure:815: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:824: checking for working makeinfo" >&5
+echo "configure:828: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:838: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:842: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
fi
echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
- if test $USE_MAINTAINER_MODE = yes; then
- MAINT=
- else
- MAINT='#M#'
- fi
+if test $USE_MAINTAINER_MODE = yes; then
+ MAINTAINER_MODE_TRUE=
+ MAINTAINER_MODE_FALSE='#'
+else
+ MAINTAINER_MODE_TRUE='#'
+ MAINTAINER_MODE_FALSE=
+fi
+ MAINT=$MAINTAINER_MODE_TRUE
+
-for ac_prog in $CCC c++ g++ gcc CC cxx cc++
+
+for ac_prog in $CCC c++ g++ gcc CC cxx cc++ cl
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:861: checking for $ac_word" >&5
+echo "configure:870: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CXX"; then
ac_cv_prog_CXX="$CXX" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_CXX="$ac_prog"
echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:892: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
+echo "configure:902: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CXX-g++} -o conftest $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cxx_cross
-cat > conftest.$ac_ext <<EOF
-#line 902 "configure"
+cat > conftest.$ac_ext << EOF
+
+#line 913 "configure"
#include "confdefs.h"
-main(){return(0);}
+
+int main(){return(0);}
EOF
-if { (eval echo configure:906: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:918: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cxx_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6
{ echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:932: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:944: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
cross_compiling=$ac_cv_prog_cxx_cross
echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
-echo "configure:937: checking whether we are using GNU C++" >&5
+echo "configure:949: checking whether we are using GNU C++" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:946: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:958: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gxx=yes
else
ac_cv_prog_gxx=no
if test $ac_cv_prog_gxx = yes; then
GXX=yes
- ac_test_CXXFLAGS="${CXXFLAGS+set}"
- ac_save_CXXFLAGS="$CXXFLAGS"
- CXXFLAGS=
- echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
-echo "configure:961: checking whether ${CXX-g++} accepts -g" >&5
+else
+ GXX=
+fi
+
+ac_test_CXXFLAGS="${CXXFLAGS+set}"
+ac_save_CXXFLAGS="$CXXFLAGS"
+CXXFLAGS=
+echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
+echo "configure:977: checking whether ${CXX-g++} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo "$ac_t""$ac_cv_prog_cxx_g" 1>&6
- if test "$ac_test_CXXFLAGS" = set; then
- CXXFLAGS="$ac_save_CXXFLAGS"
- elif test $ac_cv_prog_cxx_g = yes; then
+if test "$ac_test_CXXFLAGS" = set; then
+ CXXFLAGS="$ac_save_CXXFLAGS"
+elif test $ac_cv_prog_cxx_g = yes; then
+ if test "$GXX" = yes; then
CXXFLAGS="-g -O2"
else
- CXXFLAGS="-O2"
+ CXXFLAGS="-g"
fi
else
- GXX=
- test "${CXXFLAGS+set}" = set || CXXFLAGS="-g"
+ if test "$GXX" = yes; then
+ CXXFLAGS="-O2"
+ else
+ CXXFLAGS=
+ fi
fi
echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6
-echo "configure:989: checking how to run the C++ preprocessor" >&5
+echo "configure:1009: checking how to run the C++ preprocessor" >&5
if test -z "$CXXCPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CXX-g++} -o conftest $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cxx_cross
CXXCPP="${CXX-g++} -E"
cat > conftest.$ac_ext <<EOF
-#line 1002 "configure"
+#line 1022 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1007: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:1027: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
else
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
fi
fi
CXXCPP="$ac_cv_prog_CXXCPP"
echo "$ac_t""$CXXCPP" 1>&6
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:1063: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ # Account for people who put trailing slashes in PATH elements.
+ case "$ac_dir/" in
+ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ if test -f $ac_dir/$ac_prog; then
+ if test $ac_prog = install &&
+ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+ fi
+ fi
+ done
+ ;;
+ esac
+ done
+ IFS="$ac_save_IFS"
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL="$ac_cv_path_install"
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL="$ac_install_sh"
+ fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
# Check whether --enable-shared or --disable-shared was given.
if test "${enable_shared+set}" = set; then
enableval="$enable_shared"
enable_static=yes
fi
+# Check whether --enable-fast-install or --disable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then
+ enableval="$enable_fast_install"
+ p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_fast_install=yes
+fi
+
# Make sure we can run config.sub.
-if $ac_config_sub sun4 >/dev/null 2>&1; then :
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:1087: checking host system type" >&5
+echo "configure:1191: checking host system type" >&5
host_alias=$host
case "$host_alias" in
NONE)
case $nonopt in
NONE)
- if host_alias=`$ac_config_guess`; then :
+ if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
fi ;;
*) host_alias=$nonopt ;;
esac ;;
esac
-host=`$ac_config_sub $host_alias`
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:1212: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+ case $nonopt in
+ NONE) build_alias=$host_alias ;;
+ *) build_alias=$nonopt ;;
+ esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1110: checking for $ac_word" >&5
+echo "configure:1232: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_RANLIB="ranlib"
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1139: checking for $ac_word" >&5
+echo "configure:1262: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_CC="gcc"
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1168: checking for $ac_word" >&5
+echo "configure:1292: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_prog_rejected=no
- for ac_dir in $PATH; do
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
echo "$ac_t""no" 1>&6
fi
+ if test -z "$CC"; then
+ case "`uname -s`" in
+ *win32* | *WIN32*)
+ # Extract the first word of "cl", so it can be a program name with args.
+set dummy cl; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1343: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="cl"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+ ;;
+ esac
+ fi
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1216: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1375: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
-cat > conftest.$ac_ext <<EOF
-#line 1226 "configure"
+cat > conftest.$ac_ext << EOF
+
+#line 1386 "configure"
#include "confdefs.h"
+
main(){return(0);}
EOF
-if { (eval echo configure:1230: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1391: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
ac_cv_prog_cc_works=no
fi
rm -fr conftest*
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
if test $ac_cv_prog_cc_works = no; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1250: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1417: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1255: checking whether we are using GNU C" >&5
+echo "configure:1422: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1264: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1431: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
if test $ac_cv_prog_gcc = yes; then
GCC=yes
- ac_test_CFLAGS="${CFLAGS+set}"
- ac_save_CFLAGS="$CFLAGS"
- CFLAGS=
- echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1279: checking whether ${CC-cc} accepts -g" >&5
+else
+ GCC=
+fi
+
+ac_test_CFLAGS="${CFLAGS+set}"
+ac_save_CFLAGS="$CFLAGS"
+CFLAGS=
+echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:1450: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
- if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
- elif test $ac_cv_prog_cc_g = yes; then
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
CFLAGS="-g -O2"
else
- CFLAGS="-O2"
+ CFLAGS="-g"
fi
else
- GCC=
- test "${CFLAGS+set}" = set || CFLAGS="-g"
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
fi
# Check whether --with-gnu-ld or --without-gnu-ld was given.
with_gnu_ld=no
fi
-
ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1319: checking for ld used by GCC" >&5
+echo "configure:1493: checking for ld used by GCC" >&5
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
- # Accept absolute paths.
- /* | A-Za-z:\\*)
- test -z "$LD" && LD="$ac_prog"
- ;;
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1337: checking for GNU ld" >&5
+echo "configure:1517: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1340: checking for non-GNU ld" >&5
+echo "configure:1520: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog"; then
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
- test "$with_gnu_ld" != yes && break
+ test "$with_gnu_ld" != yes && break
fi
fi
done
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1376: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1556: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1392: checking for BSD-compatible nm" >&5
+echo "configure:1572: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- case "$NM" in
-/* | A-Za-z:\\*)
- ac_cv_path_NM="$NM" # Let the user override the test with a path.
- ;;
-*)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do
+ if test -n "$NM"; then
+ # Let the user override the test.
+ ac_cv_path_NM="$NM"
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm; then
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -B"
+ ac_cv_path_NM="$ac_dir/nm -B"
+ break
elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -p"
+ ac_cv_path_NM="$ac_dir/nm -p"
+ break
else
- ac_cv_path_NM="$ac_dir/nm"
+ ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
fi
- break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
- ;;
-esac
+fi
fi
NM="$ac_cv_path_NM"
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1429: checking whether ln -s works" >&5
+echo "configure:1609: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
# Check for any special flags to pass to ltconfig.
-libtool_flags=
+libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
+test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+ enableval="$enable_libtool_lock"
+ :
+fi
+
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case "$host" in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 1465 "configure"' > conftest.$ac_ext
- if { (eval echo configure:1466: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 1653 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:1654: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
+ echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
+echo "configure:1675: checking whether the C compiler needs -belf" >&5
+if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1680 "configure"
+#include "confdefs.h"
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:1687: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ lt_cv_cc_needs_belf=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ lt_cv_cc_needs_belf=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
;;
+
+
esac
+
+# Save cache, so that ltconfig can load it
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs. It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already. You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
+if cmp -s $cache_file confcache; then
+ :
+else
+ if test -w $cache_file; then
+ echo "updating cache $cache_file"
+ cat confcache > $cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
+# Reload cache, that may have been modified by ltconfig
+if test -r "$cache_file"; then
+ echo "loading cache $cache_file"
+ . $cache_file
+else
+ echo "creating cache $cache_file"
+ > $cache_file
+fi
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1496: checking how to run the C preprocessor" >&5
+echo "configure:1789: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1511 "configure"
+#line 1804 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1517: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:1810: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
else
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1528 "configure"
+#line 1821 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1534: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:1827: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -nologo -E"
+ cat > conftest.$ac_ext <<EOF
+#line 1838 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1844: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
else
fi
rm -f conftest*
fi
+rm -f conftest*
+fi
rm -f conftest*
ac_cv_prog_CPP="$CPP"
fi
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1562: checking for $ac_word" >&5
+echo "configure:1874: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$LEX"; then
ac_cv_prog_LEX="$LEX" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_LEX="$ac_prog"
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1594: checking for $ac_word" >&5
+echo "configure:1907: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$LEX"; then
ac_cv_prog_LEX="$LEX" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_LEX="flex"
*) ac_lib=l ;;
esac
echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:1627: checking for yywrap in -l$ac_lib" >&5
+echo "configure:1941: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1635 "configure"
+#line 1949 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
yywrap()
; return 0; }
EOF
-if { (eval echo configure:1646: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1960: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking lex output file root""... $ac_c" 1>&6
-echo "configure:1669: checking lex output file root" >&5
+echo "configure:1983: checking lex output file root" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
-echo "configure:1690: checking whether yytext is a pointer" >&5
+echo "configure:2004: checking whether yytext is a pointer" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="$LIBS $LEXLIB"
cat > conftest.$ac_ext <<EOF
-#line 1702 "configure"
+#line 2016 "configure"
#include "confdefs.h"
`cat $LEX_OUTPUT_ROOT.c`
int main() {
; return 0; }
EOF
-if { (eval echo configure:1709: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2023: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_prog_lex_yytext_pointer=yes
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1735: checking for $ac_word" >&5
+echo "configure:2049: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$YACC"; then
ac_cv_prog_YACC="$YACC" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_YACC="$ac_prog"
echo $ac_n "checking size of long""... $ac_c" 1>&6
-echo "configure:1766: checking size of long" >&5
+echo "configure:2081: checking size of long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_long=4
else
cat > conftest.$ac_ext <<EOF
-#line 1774 "configure"
+#line 2089 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:1785: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2100: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long=`cat conftestval`
else
echo $ac_n "checking size of long long""... $ac_c" 1>&6
-echo "configure:1805: checking size of long long" >&5
+echo "configure:2120: checking size of long long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_long_long=8
else
cat > conftest.$ac_ext <<EOF
-#line 1813 "configure"
+#line 2128 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:1824: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2139: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long_long=`cat conftestval`
else
echo $ac_n "checking size of long double""... $ac_c" 1>&6
-echo "configure:1844: checking size of long double" >&5
+echo "configure:2159: checking size of long double" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long_double'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_long_double=12
else
cat > conftest.$ac_ext <<EOF
-#line 1852 "configure"
+#line 2167 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:1863: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2178: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long_double=`cat conftestval`
else
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CXX-g++} -o conftest $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cxx_cross
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1895: checking for $ac_hdr" >&5
+echo "configure:2210: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1900 "configure"
+#line 2215 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1905: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:2220: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1935: checking for $ac_hdr" >&5
+echo "configure:2250: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1940 "configure"
+#line 2255 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1945: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:2260: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
save_LIBS=$LIBS
echo $ac_n "checking for readline in -lreadline""... $ac_c" 1>&6
-echo "configure:1973: checking for readline in -lreadline" >&5
+echo "configure:2288: checking for readline in -lreadline" >&5
ac_lib_var=`echo readline'_'readline | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lreadline $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1981 "configure"
+#line 2296 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
readline()
; return 0; }
EOF
-if { (eval echo configure:1995: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2310: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for cout in -lstdc++""... $ac_c" 1>&6
-echo "configure:2027: checking for cout in -lstdc++" >&5
+echo "configure:2342: checking for cout in -lstdc++" >&5
ac_lib_var=`echo stdc++'_'cout | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lstdc++ $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2035 "configure"
+#line 2350 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
cout()
; return 0; }
EOF
-if { (eval echo configure:2049: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2364: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2081: checking for $ac_hdr" >&5
+echo "configure:2396: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2086 "configure"
+#line 2401 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2091: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:2406: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2124: checking for $ac_hdr" >&5
+echo "configure:2439: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2129 "configure"
+#line 2444 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2134: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:2449: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2161: checking for $ac_hdr" >&5
+echo "configure:2476: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2166 "configure"
+#line 2481 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2171: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:2486: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
echo $ac_n "checking how to link with libcln""... $ac_c" 1>&6
-echo "configure:2206: checking how to link with libcln" >&5
+echo "configure:2521: checking how to link with libcln" >&5
saved_LIBS="${LIBS}"
if eval "test \"`echo '$''{'ginac_cv_lib_cln_link'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
case "${ac_cv_header_CLN_cln_h}" in
"yes")
cat > conftest.$ac_ext <<EOF
-#line 2215 "configure"
+#line 2530 "configure"
#include "confdefs.h"
#include <CLN/cln.h>
int main() {
factorial(1);
; return 0; }
EOF
-if { (eval echo configure:2222: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2537: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ginac_cv_lib_cln_link="-lcln"
else
;;
*)
cat > conftest.$ac_ext <<EOF
-#line 2235 "configure"
+#line 2550 "configure"
#include "confdefs.h"
#include <cln.h>
int main() {
factorial(1);
; return 0; }
EOF
-if { (eval echo configure:2242: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2557: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ginac_cv_lib_cln_link="-lcln"
else
echo "$ac_t""-lcln" 1>&6
echo $ac_n "checking whether libcln behaves sane""... $ac_c" 1>&6
-echo "configure:2263: checking whether libcln behaves sane" >&5
+echo "configure:2578: checking whether libcln behaves sane" >&5
if eval "test \"`echo '$''{'ginac_cv_lib_cln_integrity'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ginac_cv_lib_cln_integrity="guessing sane"
else
cat > conftest.$ac_ext <<EOF
-#line 2274 "configure"
+#line 2589 "configure"
#include "confdefs.h"
#ifdef __cplusplus
extern "C" void exit(int);
if (q+p != 3) return 1; else return 0;
}
EOF
-if { (eval echo configure:2285: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2600: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ginac_cv_lib_cln_integrity="sane"
else
ginac_cv_lib_cln_integrity="guessing sane"
else
cat > conftest.$ac_ext <<EOF
-#line 2303 "configure"
+#line 2618 "configure"
#include "confdefs.h"
#ifdef __cplusplus
extern "C" void exit(int);
if (q+p != 3) return 1; else return 0;
}
EOF
-if { (eval echo configure:2314: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2629: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ginac_cv_lib_cln_integrity="sane"
else
# Extract the first word of "doxygen", so it can be a program name with args.
set dummy doxygen; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2362: checking for $ac_word" >&5
+echo "configure:2677: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_DOXYGEN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
/*)
ac_cv_path_DOXYGEN="$DOXYGEN" # Let the user override the test with a path.
;;
+ ?:/*)
+ ac_cv_path_DOXYGEN="$DOXYGEN" # Let the user override the test with a dos path.
+ ;;
*)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_path_DOXYGEN="$ac_dir/$ac_word"
# Extract the first word of "jade", so it can be a program name with args.
set dummy jade; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2394: checking for $ac_word" >&5
+echo "configure:2713: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_JADE'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
/*)
ac_cv_path_JADE="$JADE" # Let the user override the test with a path.
;;
+ ?:/*)
+ ac_cv_path_JADE="$JADE" # Let the user override the test with a dos path.
+ ;;
*)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_path_JADE="$ac_dir/$ac_word"
# Extract the first word of "jadetex", so it can be a program name with args.
set dummy jadetex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2426: checking for $ac_word" >&5
+echo "configure:2749: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_JADETEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
/*)
ac_cv_path_JADETEX="$JADETEX" # Let the user override the test with a path.
;;
+ ?:/*)
+ ac_cv_path_JADETEX="$JADETEX" # Let the user override the test with a dos path.
+ ;;
*)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_path_JADETEX="$ac_dir/$ac_word"
# Extract the first word of "latex", so it can be a program name with args.
set dummy latex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2458: checking for $ac_word" >&5
+echo "configure:2785: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_LATEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
/*)
ac_cv_path_LATEX="$LATEX" # Let the user override the test with a path.
;;
+ ?:/*)
+ ac_cv_path_LATEX="$LATEX" # Let the user override the test with a dos path.
+ ;;
*)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_path_LATEX="$ac_dir/$ac_word"
# Extract the first word of "makeindex", so it can be a program name with args.
set dummy makeindex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2490: checking for $ac_word" >&5
+echo "configure:2821: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MAKEINDEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
/*)
ac_cv_path_MAKEINDEX="$MAKEINDEX" # Let the user override the test with a path.
;;
+ ?:/*)
+ ac_cv_path_MAKEINDEX="$MAKEINDEX" # Let the user override the test with a dos path.
+ ;;
*)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_path_MAKEINDEX="$ac_dir/$ac_word"
# Extract the first word of "dvips", so it can be a program name with args.
set dummy dvips; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2522: checking for $ac_word" >&5
+echo "configure:2857: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_DVIPS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
/*)
ac_cv_path_DVIPS="$DVIPS" # Let the user override the test with a path.
;;
+ ?:/*)
+ ac_cv_path_DVIPS="$DVIPS" # Let the user override the test with a dos path.
+ ;;
*)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_path_DVIPS="$ac_dir/$ac_word"
# Extract the first word of "fig2dev", so it can be a program name with args.
set dummy fig2dev; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2554: checking for $ac_word" >&5
+echo "configure:2893: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_FIG2DEV'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
/*)
ac_cv_path_FIG2DEV="$FIG2DEV" # Let the user override the test with a path.
;;
+ ?:/*)
+ ac_cv_path_FIG2DEV="$FIG2DEV" # Let the user override the test with a dos path.
+ ;;
*)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_path_FIG2DEV="$ac_dir/$ac_word"
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
- case `(ac_space=' '; set) 2>&1` in
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
*ac_space=\ *)
# `set' does not quote correctly, so add quotes (double-quote substitution
# turns \\\\ into \\, and sed turns \\ into \).
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.12"
+ echo "$CONFIG_STATUS generated by autoconf version 2.13"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
+s%@SHELL@%$SHELL%g
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
+s%@FFLAGS@%$FFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@LT_REVISION@%$LT_REVISION%g
s%@LT_AGE@%$LT_AGE%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@PACKAGE@%$PACKAGE%g
s%@VERSION@%$VERSION%g
s%@ACLOCAL@%$ACLOCAL%g
s%@AUTOHEADER@%$AUTOHEADER%g
s%@MAKEINFO@%$MAKEINFO%g
s%@SET_MAKE@%$SET_MAKE%g
+s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
+s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
s%@MAINT@%$MAINT%g
s%@CXX@%$CXX%g
s%@CXXCPP@%$CXXCPP%g
s%@host_cpu@%$host_cpu%g
s%@host_vendor@%$host_vendor%g
s%@host_os@%$host_os%g
+s%@build@%$build%g
+s%@build_alias@%$build_alias%g
+s%@build_cpu@%$build_cpu%g
+s%@build_vendor@%$build_vendor%g
+s%@build_os@%$build_os%g
s%@RANLIB@%$RANLIB%g
s%@CC@%$CC%g
s%@LD@%$LD%g
dnl ===========================================================================
AC_PROG_CXX
AC_PROG_CXXCPP
-AM_PROG_INSTALL
+AC_PROG_INSTALL
AM_PROG_LIBTOOL
AM_PROG_LEX
AC_PROG_YACC
-# Makefile.in generated automatically by automake 1.3 from Makefile.am
+# Makefile.in generated automatically by automake 1.4 from Makefile.am
-# Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# PARTICULAR PURPOSE.
-SHELL = /bin/sh
+SHELL = @SHELL@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
includedir = @includedir@
oldincludedir = /usr/include
-DISTDIR =
+DESTDIR =
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
AUTOHEADER = @AUTOHEADER@
INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@
POST_UNINSTALL = :
host_alias = @host_alias@
host_triplet = @host@
+AS = @AS@
CC = @CC@
CXX = @CXX@
CXXCPP = @CXXCPP@
+DLLTOOL = @DLLTOOL@
DOXYGEN = @DOXYGEN@
DVIPS = @DVIPS@
FIG2DEV = @FIG2DEV@
MAKEINDEX = @MAKEINDEX@
MAKEINFO = @MAKEINFO@
NM = @NM@
+OBJDUMP = @OBJDUMP@
PACKAGE = @PACKAGE@
RANLIB = @RANLIB@
REFERENCE_TARGETS = @REFERENCE_TARGETS@
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
TAR = tar
-GZIP = --best
-all: all-recursive all-am
-
+GZIP_ENV = --best
+all: all-redirect
.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINT@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
installdirs-recursive install-recursive uninstall-recursive \
check-recursive installcheck-recursive info-recursive dvi-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
- target=`echo $@ | sed s/-recursive//`; \
echo "Making $$target in $$subdir"; \
- (cd $$subdir && $(MAKE) $$target) \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
- done && test -z "$$fail"
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
+ dot_seen=no; \
rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
rev="$$subdir $$rev"; \
+ test "$$subdir" = "." && dot_seen=yes; \
done; \
+ test "$$dot_seen" = "no" && rev=". $$rev"; \
+ target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
- target=`echo $@ | sed s/-recursive//`; \
echo "Making $$target in $$subdir"; \
- (cd $$subdir && $(MAKE) $$target) \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
- (cd $$subdir && $(MAKE) tags); \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
tags: TAGS
ID: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS)'; \
+ unique=`for i in $$list; do echo $$i; done | \
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
here=`pwd` && cd $(srcdir) \
- && mkid -f$$here/ID $(SOURCES) $(HEADERS) $(LISP)
+ && mkid -f$$here/ID $$unique $(LISP)
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
- test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+ if test "$$subdir" = .; then :; else \
+ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+ fi; \
done; \
list='$(SOURCES) $(HEADERS)'; \
unique=`for i in $$list; do echo $$i; done | \
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu doc/Makefile
@for file in $(DISTFILES); do \
d=$(srcdir); \
- test -f $(distdir)/$$file \
- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
- || cp -p $$d/$$file $(distdir)/$$file; \
+ if test -d $$d/$$file; then \
+ cp -pr $$d/$$file $(distdir)/$$file; \
+ else \
+ test -f $(distdir)/$$file \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
done
for subdir in $(SUBDIRS); do \
- test -d $(distdir)/$$subdir \
- || mkdir $(distdir)/$$subdir \
- || exit 1; \
- chmod 777 $(distdir)/$$subdir; \
- (cd $$subdir && $(MAKE) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \
+ if test "$$subdir" = .; then :; else \
+ test -d $(distdir)/$$subdir \
+ || mkdir $(distdir)/$$subdir \
|| exit 1; \
+ chmod 777 $(distdir)/$$subdir; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \
+ || exit 1; \
+ fi; \
done
+info-am:
info: info-recursive
+dvi-am:
dvi: dvi-recursive
-check: all-am
- $(MAKE) check-recursive
+check-am: all-am
+check: check-recursive
+installcheck-am:
installcheck: installcheck-recursive
-all-am: Makefile
-
+install-exec-am:
install-exec: install-exec-recursive
- @$(NORMAL_INSTALL)
+install-data-am:
install-data: install-data-recursive
- @$(NORMAL_INSTALL)
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
- @:
-
+uninstall-am:
uninstall: uninstall-recursive
-
+all-am: Makefile
+all-redirect: all-recursive
install-strip:
- $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
+ $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
+installdirs-am:
mostlyclean-generic:
- -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
clean-generic:
- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
- -rm -f Makefile $(DISTCLEANFILES)
+ -rm -f Makefile $(CONFIG_CLEAN_FILES)
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
- -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
mostlyclean-am: mostlyclean-tags mostlyclean-generic
+mostlyclean: mostlyclean-recursive
+
clean-am: clean-tags clean-generic mostlyclean-am
+clean: clean-recursive
+
distclean-am: distclean-tags distclean-generic clean-am
+ -rm -f libtool
+
+distclean: distclean-recursive
maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \
distclean-am
-
-mostlyclean: mostlyclean-recursive mostlyclean-am
-
-clean: clean-recursive clean-am
-
-distclean: distclean-recursive distclean-am
- -rm -f config.status
- -rm -f libtool
-
-maintainer-clean: maintainer-clean-recursive maintainer-clean-am
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
+maintainer-clean: maintainer-clean-recursive
+
.PHONY: install-data-recursive uninstall-data-recursive \
install-exec-recursive uninstall-exec-recursive installdirs-recursive \
uninstalldirs-recursive all-recursive check-recursive \
installcheck-recursive info-recursive dvi-recursive \
mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir info dvi \
-installcheck all-am install-exec install-data install uninstall all \
+distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+install-exec install-data-am install-data install-am install \
+uninstall-am uninstall all-redirect all-am all installdirs-am \
installdirs mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean
reference.ps: latex latex/reference.ps
cp ${srcdir}/latex/reference.ps reference.ps
+ginacdocdir = $(datadir)/doc/GiNaC
+ginacreferencedir = $(ginacdocdir)/reference
+ginacreference_DATA = @REFERENCE_TARGETS@
+EXTRA_DATA = index.html reference.ps
+
+CLEANFILES = *.html *.gif doxygen.css *.ps latex/*
+EXTRA_DIST = DoxyfileHTML DoxyfileTEX Doxyfooter
+
install-data-local:
$(INSTALL_DATA) $(srcdir)/doxygen.css $(DESTDIR)$(ginacreferencedir)/doxygen.css
@for p in *.html; do \
echo " rm -f $(DESTDIR)$(ginacreferencedir)/$$p"; \
rm -f $(DESTDIR)$(ginacreferencedir)/$$p; \
done
-
-ginacdocdir = $(datadir)/doc/GiNaC
-ginacreferencedir = $(ginacdocdir)/reference
-ginacreference_DATA = $(REFERENCE_TARGETS)
-EXTRA_DATA = index.html reference.ps
-
-CLEANFILES = *.html *.gif doxygen.css *.ps latex/*
-EXTRA_DIST = DoxyfileHTML DoxyfileTEX Doxyfooter
-# Makefile.in generated automatically by automake 1.3 from Makefile.am
+# Makefile.in generated automatically by automake 1.4 from Makefile.am
-# Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# sources with a JavaDoc-like tool (in this case doxygen):
-SHELL = /bin/sh
+SHELL = @SHELL@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
includedir = @includedir@
oldincludedir = /usr/include
-DISTDIR =
+DESTDIR =
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
AUTOHEADER = @AUTOHEADER@
INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@
POST_UNINSTALL = :
host_alias = @host_alias@
host_triplet = @host@
+AS = @AS@
CC = @CC@
CXX = @CXX@
CXXCPP = @CXXCPP@
+DLLTOOL = @DLLTOOL@
DOXYGEN = @DOXYGEN@
DVIPS = @DVIPS@
FIG2DEV = @FIG2DEV@
MAKEINDEX = @MAKEINDEX@
MAKEINFO = @MAKEINFO@
NM = @NM@
+OBJDUMP = @OBJDUMP@
PACKAGE = @PACKAGE@
RANLIB = @RANLIB@
REFERENCE_TARGETS = @REFERENCE_TARGETS@
ginacdocdir = $(datadir)/doc/GiNaC
ginacreferencedir = $(ginacdocdir)/reference
-ginacreference_DATA = $(REFERENCE_TARGETS)
+ginacreference_DATA = @REFERENCE_TARGETS@
EXTRA_DATA = index.html reference.ps
CLEANFILES = *.html *.gif doxygen.css *.ps latex/*
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
TAR = tar
-GZIP = --best
-all: Makefile $(DATA)
-
+GZIP_ENV = --best
+all: all-redirect
.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINT@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/reference/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu doc/reference/Makefile
@for file in $(DISTFILES); do \
d=$(srcdir); \
- test -f $(distdir)/$$file \
- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
- || cp -p $$d/$$file $(distdir)/$$file; \
+ if test -d $$d/$$file; then \
+ cp -pr $$d/$$file $(distdir)/$$file; \
+ else \
+ test -f $(distdir)/$$file \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
done
-info:
-dvi:
-check: all
- $(MAKE)
-installcheck:
-install-exec:
- @$(NORMAL_INSTALL)
-
-install-data: install-ginacreferenceDATA install-data-local
- @$(NORMAL_INSTALL)
-
-install: install-exec install-data all
- @:
-
-uninstall: uninstall-ginacreferenceDATA uninstall-local
-
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am:
+install-exec: install-exec-am
+
+install-data-am: install-ginacreferenceDATA install-data-local
+install-data: install-data-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am: uninstall-ginacreferenceDATA uninstall-local
+uninstall: uninstall-am
+all-am: Makefile $(DATA)
+all-redirect: all-am
install-strip:
- $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
+ $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs:
- $(mkinstalldirs) $(DATADIR)$(ginacreferencedir)
+ $(mkinstalldirs) $(DESTDIR)$(ginacreferencedir)
mostlyclean-generic:
- -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
- -rm -f Makefile $(DISTCLEANFILES)
+ -rm -f Makefile $(CONFIG_CLEAN_FILES)
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
- -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
-mostlyclean: mostlyclean-generic
+mostlyclean-am: mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am: clean-generic mostlyclean-am
-clean: clean-generic mostlyclean
+clean: clean-am
-distclean: distclean-generic clean
- -rm -f config.status
+distclean-am: distclean-generic clean-am
-rm -f libtool
-maintainer-clean: maintainer-clean-generic distclean
+distclean: distclean-am
+
+maintainer-clean-am: maintainer-clean-generic distclean-am
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
+maintainer-clean: maintainer-clean-am
+
.PHONY: uninstall-ginacreferenceDATA install-ginacreferenceDATA tags \
-distdir info dvi installcheck install-exec install-data install \
-uninstall all installdirs mostlyclean-generic distclean-generic \
-clean-generic maintainer-clean-generic clean mostlyclean distclean \
-maintainer-clean
+distdir info-am info dvi-am dvi check check-am installcheck-am \
+installcheck install-exec-am install-exec install-data-local \
+install-data-am install-data install-am install uninstall-local \
+uninstall-am uninstall all-redirect all-am all installdirs \
+mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
index.html:
echo "warning: target tutorial.ps disabled by configuration"; \
fi
+ginacdocdir = $(datadir)/doc/GiNaC
+ginactutorialdir = $(ginacdocdir)/tutorial
+ginactutorial_DATA = @TUTORIAL_TARGETS@
+EXTRA_DATA = index.html tutorial.ps
+
+CLEANFILES = *.html *.png *.ps *.tex *.log *.aux *.dvi *.eps tutorial.sgml HTML.manifest
+EXTRA_DIST = tutorial.sgml.in $(FIG)
+
install-data-local:
@for p in *.html; do \
echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(ginactutorialdir)/$$p"; \
echo " rm -f $(DESTDIR)$(ginactutorialdir)/$$p"; \
rm -f $(DESTDIR)$(ginactutorialdir)/$$p; \
done
-
-ginacdocdir = $(datadir)/doc/GiNaC
-ginactutorialdir = $(ginacdocdir)/tutorial
-ginactutorial_DATA = $(TUTORIAL_TARGETS)
-EXTRA_DATA = index.html tutorial.ps
-
-CLEANFILES = *.html *.png *.ps *.tex *.log *.aux *.dvi *.eps tutorial.sgml HTML.manifest
-EXTRA_DIST = tutorial.sgml.in $(FIG)
-# Makefile.in generated automatically by automake 1.3 from Makefile.am
+# Makefile.in generated automatically by automake 1.4 from Makefile.am
-# Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# different graphics output. This seems to be an ugly limitation of docbook...
-SHELL = /bin/sh
+SHELL = @SHELL@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
includedir = @includedir@
oldincludedir = /usr/include
-DISTDIR =
+DESTDIR =
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
AUTOHEADER = @AUTOHEADER@
INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@
POST_UNINSTALL = :
host_alias = @host_alias@
host_triplet = @host@
+AS = @AS@
CC = @CC@
CXX = @CXX@
CXXCPP = @CXXCPP@
+DLLTOOL = @DLLTOOL@
DOXYGEN = @DOXYGEN@
DVIPS = @DVIPS@
FIG2DEV = @FIG2DEV@
MAKEINDEX = @MAKEINDEX@
MAKEINFO = @MAKEINFO@
NM = @NM@
+OBJDUMP = @OBJDUMP@
PACKAGE = @PACKAGE@
RANLIB = @RANLIB@
REFERENCE_TARGETS = @REFERENCE_TARGETS@
ginacdocdir = $(datadir)/doc/GiNaC
ginactutorialdir = $(ginacdocdir)/tutorial
-ginactutorial_DATA = $(TUTORIAL_TARGETS)
+ginactutorial_DATA = @TUTORIAL_TARGETS@
EXTRA_DATA = index.html tutorial.ps
CLEANFILES = *.html *.png *.ps *.tex *.log *.aux *.dvi *.eps tutorial.sgml HTML.manifest
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
TAR = tar
-GZIP = --best
-all: Makefile $(DATA)
-
+GZIP_ENV = --best
+all: all-redirect
.SUFFIXES:
.SUFFIXES: .eps .fig .png
-$(srcdir)/Makefile.in: @MAINT@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/tutorial/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu doc/tutorial/Makefile
@for file in $(DISTFILES); do \
d=$(srcdir); \
- test -f $(distdir)/$$file \
- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
- || cp -p $$d/$$file $(distdir)/$$file; \
+ if test -d $$d/$$file; then \
+ cp -pr $$d/$$file $(distdir)/$$file; \
+ else \
+ test -f $(distdir)/$$file \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
done
-info:
-dvi:
-check: all
- $(MAKE)
-installcheck:
-install-exec:
- @$(NORMAL_INSTALL)
-
-install-data: install-ginactutorialDATA install-data-local
- @$(NORMAL_INSTALL)
-
-install: install-exec install-data all
- @:
-
-uninstall: uninstall-ginactutorialDATA uninstall-local
-
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am:
+install-exec: install-exec-am
+
+install-data-am: install-ginactutorialDATA install-data-local
+install-data: install-data-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am: uninstall-ginactutorialDATA uninstall-local
+uninstall: uninstall-am
+all-am: Makefile $(DATA)
+all-redirect: all-am
install-strip:
- $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
+ $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs:
- $(mkinstalldirs) $(DATADIR)$(ginactutorialdir)
+ $(mkinstalldirs) $(DESTDIR)$(ginactutorialdir)
mostlyclean-generic:
- -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
- -rm -f Makefile $(DISTCLEANFILES)
+ -rm -f Makefile $(CONFIG_CLEAN_FILES)
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
- -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
-mostlyclean: mostlyclean-generic
+mostlyclean-am: mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am: clean-generic mostlyclean-am
-clean: clean-generic mostlyclean
+clean: clean-am
-distclean: distclean-generic clean
- -rm -f config.status
+distclean-am: distclean-generic clean-am
-rm -f libtool
-maintainer-clean: maintainer-clean-generic distclean
+distclean: distclean-am
+
+maintainer-clean-am: maintainer-clean-generic distclean-am
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
+maintainer-clean: maintainer-clean-am
+
.PHONY: uninstall-ginactutorialDATA install-ginactutorialDATA tags \
-distdir info dvi installcheck install-exec install-data install \
-uninstall all installdirs mostlyclean-generic distclean-generic \
-clean-generic maintainer-clean-generic clean mostlyclean distclean \
-maintainer-clean
+distdir info-am info dvi-am dvi check check-am installcheck-am \
+installcheck install-exec-am install-exec install-data-local \
+install-data-am install-data install-am install uninstall-local \
+uninstall-am uninstall all-redirect all-am all installdirs \
+mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
%.eps: %.fig
-# Makefile.in generated automatically by automake 1.3 from Makefile.am
+# Makefile.in generated automatically by automake 1.4 from Makefile.am
-# Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# PARTICULAR PURPOSE.
-SHELL = /bin/sh
+SHELL = @SHELL@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
includedir = @includedir@
oldincludedir = /usr/include
-DISTDIR =
+DESTDIR =
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
AUTOHEADER = @AUTOHEADER@
INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@
POST_UNINSTALL = :
host_alias = @host_alias@
host_triplet = @host@
+AS = @AS@
CC = @CC@
CXX = @CXX@
CXXCPP = @CXXCPP@
+DLLTOOL = @DLLTOOL@
DOXYGEN = @DOXYGEN@
DVIPS = @DVIPS@
FIG2DEV = @FIG2DEV@
MAKEINDEX = @MAKEINDEX@
MAKEINFO = @MAKEINFO@
NM = @NM@
+OBJDUMP = @OBJDUMP@
PACKAGE = @PACKAGE@
RANLIB = @RANLIB@
REFERENCE_TARGETS = @REFERENCE_TARGETS@
YACC = @YACC@
lib_LTLIBRARIES = libginac.la
-libginac_la_SOURCES = add.cpp basic.cpp constant.cpp diff.cpp ex.cpp \
- expairseq.cpp exprseq.cpp fail.cpp function.cpp inifcns.cpp \
- inifcns_trans.cpp inifcns_zeta.cpp inifcns_gamma.cpp matrix.cpp mul.cpp \
- normal.cpp numeric.cpp operators.cpp power.cpp print.cpp printraw.cpp \
- printtree.cpp printcsrc.cpp relational.cpp symbol.cpp utils.cpp series.cpp \
- ncmul.cpp clifford.cpp structure.cpp color.cpp indexed.cpp idx.cpp \
- isospin.cpp exprseq_suppl.cpp lst.cpp lst_suppl.cpp simp_lor.cpp \
- coloridx.cpp lorentzidx.cpp debugmsg.h utils.h
-libginac_la_LDFLAGS = -version-info $(LT_CURRENT):$(LT_REVISION):$(LT_AGE) \
- -release $(LT_RELEASE)
+libginac_la_SOURCES = add.cpp basic.cpp constant.cpp diff.cpp ex.cpp expairseq.cpp exprseq.cpp fail.cpp function.cpp inifcns.cpp inifcns_trans.cpp inifcns_zeta.cpp inifcns_gamma.cpp matrix.cpp mul.cpp normal.cpp numeric.cpp operators.cpp power.cpp print.cpp printraw.cpp printtree.cpp printcsrc.cpp relational.cpp symbol.cpp utils.cpp series.cpp ncmul.cpp clifford.cpp structure.cpp color.cpp indexed.cpp idx.cpp isospin.cpp exprseq_suppl.cpp lst.cpp lst_suppl.cpp simp_lor.cpp coloridx.cpp lorentzidx.cpp debugmsg.h utils.h
+
+libginac_la_LDFLAGS = -version-info $(LT_CURRENT):$(LT_REVISION):$(LT_AGE) -release $(LT_RELEASE)
+
ginacincludedir = $(includedir)/ginac
-ginacinclude_HEADERS = ginac.h add.h basic.h clifford.h color.h coloridx.h \
- constant.h ex.h expair.h expairseq.h exprseq.h fail.h flags.h function.h \
- idx.h indexed.h inifcns.h isospin.h lorentzidx.h lst.h matrix.h mul.h \
- ncmul.h normal.h numeric.h operators.h power.h relational.h series.h \
- simp_lor.h structure.h symbol.h tinfos.h assertion.h
+ginacinclude_HEADERS = ginac.h add.h basic.h clifford.h color.h coloridx.h constant.h ex.h expair.h expairseq.h exprseq.h fail.h flags.h function.h idx.h indexed.h inifcns.h isospin.h lorentzidx.h lst.h matrix.h mul.h ncmul.h normal.h numeric.h operators.h power.h relational.h series.h simp_lor.h structure.h symbol.h tinfos.h assertion.h
+
EXTRA_DIST = container.pl function.pl structure.pl
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = ../config.h
structure.lo color.lo indexed.lo idx.lo isospin.lo exprseq_suppl.lo \
lst.lo lst_suppl.lo simp_lor.lo coloridx.lo lorentzidx.lo
CXXFLAGS = @CXXFLAGS@
-CXXCOMPILE = $(CXX) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CXXFLAGS)
-LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CXXFLAGS)
-CXXLINK = $(LIBTOOL) --mode=link $(CXX) $(CXXFLAGS) $(LDFLAGS) -o $@
+CXXCOMPILE = $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+CXXLD = $(CXX)
+CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(LDFLAGS) -o $@
+CFLAGS = @CFLAGS@
+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
HEADERS = $(ginacinclude_HEADERS)
DIST_COMMON = Makefile.am Makefile.in
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
TAR = tar
-GZIP = --best
+GZIP_ENV = --best
DEP_FILES = .deps/add.P .deps/basic.P .deps/clifford.P .deps/color.P \
.deps/coloridx.P .deps/constant.P .deps/diff.P .deps/ex.P \
.deps/expairseq.P .deps/exprseq.P .deps/exprseq_suppl.P .deps/fail.P \
.deps/operators.P .deps/power.P .deps/print.P .deps/printcsrc.P \
.deps/printraw.P .deps/printtree.P .deps/relational.P .deps/series.P \
.deps/simp_lor.P .deps/structure.P .deps/symbol.P .deps/utils.P
-CXXMKDEP = $(CXX) -M $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CXXFLAGS)
SOURCES = $(libginac_la_SOURCES)
OBJECTS = $(libginac_la_OBJECTS)
-all: Makefile $(LTLIBRARIES) $(HEADERS)
-
+all: all-redirect
.SUFFIXES:
.SUFFIXES: .S .c .cpp .lo .o .s
-$(srcdir)/Makefile.in: @MAINT@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && $(AUTOMAKE) --gnu ginac/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
$(mkinstalldirs) $(DESTDIR)$(libdir)
@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
if test -f $$p; then \
- echo "$(LIBTOOL) --mode=install $(INSTALL_DATA) $$p $(DESTDIR)$(libdir)/$$p"; \
- $(LIBTOOL) --mode=install $(INSTALL_DATA) $$p $(DESTDIR)$(libdir)/$$p; \
+ echo "$(LIBTOOL) --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p"; \
+ $(LIBTOOL) --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p; \
else :; fi; \
done
tags: TAGS
ID: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS)'; \
+ unique=`for i in $$list; do echo $$i; done | \
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
here=`pwd` && cd $(srcdir) \
- && mkid -f$$here/ID $(SOURCES) $(HEADERS) $(LISP)
+ && mkid -f$$here/ID $$unique $(LISP)
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
tags=; \
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu ginac/Makefile
@for file in $(DISTFILES); do \
d=$(srcdir); \
- test -f $(distdir)/$$file \
- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
- || cp -p $$d/$$file $(distdir)/$$file; \
+ if test -d $$d/$$file; then \
+ cp -pr $$d/$$file $(distdir)/$$file; \
+ else \
+ test -f $(distdir)/$$file \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
done
DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
clean-depend:
distclean-depend:
+ -rm -rf .deps
maintainer-clean-depend:
- -rm -rf .deps
%.o: %.c
@echo '$(COMPILE) -c $<'; \
- $(COMPILE) -Wp,-MD,.deps/$(*F).P -c $<
+ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+ @-cp .deps/$(*F).pp .deps/$(*F).P; \
+ tr ' ' '\012' < .deps/$(*F).pp \
+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+ >> .deps/$(*F).P; \
+ rm .deps/$(*F).pp
%.lo: %.c
@echo '$(LTCOMPILE) -c $<'; \
- $(LTCOMPILE) -Wp,-MD,.deps/$(*F).p -c $<
- @-sed -e 's/^\([^:]*\)\.o:/\1.lo \1.o:/' \
- < .deps/$(*F).p > .deps/$(*F).P
- @-rm -f .deps/$(*F).p
+ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
+ < .deps/$(*F).pp > .deps/$(*F).P; \
+ tr ' ' '\012' < .deps/$(*F).pp \
+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+ >> .deps/$(*F).P; \
+ rm -f .deps/$(*F).pp
%.o: %.cpp
@echo '$(CXXCOMPILE) -c $<'; \
- $(CXXCOMPILE) -Wp,-MD,.deps/$(*F).P -c $<
+ $(CXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+ @-cp .deps/$(*F).pp .deps/$(*F).P; \
+ tr ' ' '\012' < .deps/$(*F).pp \
+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+ >> .deps/$(*F).P; \
+ rm .deps/$(*F).pp
%.lo: %.cpp
@echo '$(LTCXXCOMPILE) -c $<'; \
- $(LTCXXCOMPILE) -Wp,-MD,.deps/$(*F).p -c $<
- @-sed -e 's/^\([^:]*\)\.o:/\1.lo \1.o:/' \
- < .deps/$(*F).p > .deps/$(*F).P
- @-rm -f .deps/$(*F).p
-info:
-dvi:
-check: all
- $(MAKE)
-installcheck:
-install-exec: install-libLTLIBRARIES
- @$(NORMAL_INSTALL)
-
-install-data: install-ginacincludeHEADERS
- @$(NORMAL_INSTALL)
-
-install: install-exec install-data all
- @:
-
-uninstall: uninstall-libLTLIBRARIES uninstall-ginacincludeHEADERS
-
+ $(LTCXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
+ < .deps/$(*F).pp > .deps/$(*F).P; \
+ tr ' ' '\012' < .deps/$(*F).pp \
+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+ >> .deps/$(*F).P; \
+ rm -f .deps/$(*F).pp
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am: install-libLTLIBRARIES
+install-exec: install-exec-am
+
+install-data-am: install-ginacincludeHEADERS
+install-data: install-data-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am: uninstall-libLTLIBRARIES uninstall-ginacincludeHEADERS
+uninstall: uninstall-am
+all-am: Makefile $(LTLIBRARIES) $(HEADERS)
+all-redirect: all-am
install-strip:
- $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
+ $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs:
- $(mkinstalldirs) $(DATADIR)$(libdir) $(DATADIR)$(ginacincludedir)
+ $(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(ginacincludedir)
mostlyclean-generic:
- -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
clean-generic:
- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
- -rm -f Makefile $(DISTCLEANFILES)
+ -rm -f Makefile $(CONFIG_CLEAN_FILES)
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
- -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
-mostlyclean: mostlyclean-libLTLIBRARIES mostlyclean-compile \
+mostlyclean-am: mostlyclean-libLTLIBRARIES mostlyclean-compile \
mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
mostlyclean-generic
-clean: clean-libLTLIBRARIES clean-compile clean-libtool clean-tags \
- clean-depend clean-generic mostlyclean
+mostlyclean: mostlyclean-am
+
+clean-am: clean-libLTLIBRARIES clean-compile clean-libtool clean-tags \
+ clean-depend clean-generic mostlyclean-am
+
+clean: clean-am
-distclean: distclean-libLTLIBRARIES distclean-compile distclean-libtool \
- distclean-tags distclean-depend distclean-generic clean
- -rm -f config.status
+distclean-am: distclean-libLTLIBRARIES distclean-compile \
+ distclean-libtool distclean-tags distclean-depend \
+ distclean-generic clean-am
-rm -f libtool
-maintainer-clean: maintainer-clean-libLTLIBRARIES \
+distclean: distclean-am
+
+maintainer-clean-am: maintainer-clean-libLTLIBRARIES \
maintainer-clean-compile maintainer-clean-libtool \
maintainer-clean-tags maintainer-clean-depend \
- maintainer-clean-generic distclean
+ maintainer-clean-generic distclean-am
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
+maintainer-clean: maintainer-clean-am
+
.PHONY: mostlyclean-libLTLIBRARIES distclean-libLTLIBRARIES \
clean-libLTLIBRARIES maintainer-clean-libLTLIBRARIES \
uninstall-libLTLIBRARIES install-libLTLIBRARIES mostlyclean-compile \
maintainer-clean-libtool uninstall-ginacincludeHEADERS \
install-ginacincludeHEADERS tags mostlyclean-tags distclean-tags \
clean-tags maintainer-clean-tags distdir mostlyclean-depend \
-distclean-depend clean-depend maintainer-clean-depend info dvi \
-installcheck install-exec install-data install uninstall all \
-installdirs mostlyclean-generic distclean-generic clean-generic \
+distclean-depend clean-depend maintainer-clean-depend info-am info \
+dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+install-exec install-data-am install-data install-am install \
+uninstall-am uninstall all-redirect all-am all installdirs \
+mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-# Makefile.in generated automatically by automake 1.3 from Makefile.am
+# Makefile.in generated automatically by automake 1.4 from Makefile.am
-# Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# PARTICULAR PURPOSE.
-SHELL = /bin/sh
+SHELL = @SHELL@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
includedir = @includedir@
oldincludedir = /usr/include
-DISTDIR =
+DESTDIR =
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
AUTOHEADER = @AUTOHEADER@
INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@
POST_UNINSTALL = :
host_alias = @host_alias@
host_triplet = @host@
+AS = @AS@
CC = @CC@
CXX = @CXX@
CXXCPP = @CXXCPP@
+DLLTOOL = @DLLTOOL@
DOXYGEN = @DOXYGEN@
DVIPS = @DVIPS@
FIG2DEV = @FIG2DEV@
MAKEINDEX = @MAKEINDEX@
MAKEINFO = @MAKEINFO@
NM = @NM@
+OBJDUMP = @OBJDUMP@
PACKAGE = @PACKAGE@
RANLIB = @RANLIB@
REFERENCE_TARGETS = @REFERENCE_TARGETS@
ginsh_OBJECTS = ginsh_parser.o ginsh_lexer.o
ginsh_DEPENDENCIES = ../ginac/libginac.la
ginsh_LDFLAGS =
+CXXFLAGS = @CXXFLAGS@
+CXXCOMPILE = $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+CXXLD = $(CXX)
+CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(LDFLAGS) -o $@
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LEXLIB = @LEXLIB@
-CXXFLAGS = @CXXFLAGS@
-CXXCOMPILE = $(CXX) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CXXFLAGS)
-LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CXXFLAGS)
-CXXLINK = $(LIBTOOL) --mode=link $(CXX) $(CXXFLAGS) $(LDFLAGS) -o $@
CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
-LINK = $(LIBTOOL) --mode=link $(CC) $(CFLAGS) $(LDFLAGS) -o $@
+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
man1dir = $(mandir)/man1
MANS = $(man_MANS)
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
TAR = tar
-GZIP = --best
+GZIP_ENV = --best
DEP_FILES = .deps/ginsh_lexer.P .deps/ginsh_parser.P
-CXXMKDEP = $(CXX) -M $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CXXFLAGS)
SOURCES = $(ginsh_SOURCES)
OBJECTS = $(ginsh_OBJECTS)
-all: Makefile $(PROGRAMS) $(MANS)
-
+all: all-redirect
.SUFFIXES:
.SUFFIXES: .S .c .cc .ll .lo .o .s .yy
-$(srcdir)/Makefile.in: @MAINT@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && $(AUTOMAKE) --gnu ginsh/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
$(mkinstalldirs) $(DESTDIR)$(bindir)
@list='$(bin_PROGRAMS)'; for p in $$list; do \
if test -f $$p; then \
- echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`"; \
- $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`; \
+ echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
+ $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
else :; fi; \
done
uninstall-binPROGRAMS:
@$(NORMAL_UNINSTALL)
list='$(bin_PROGRAMS)'; for p in $$list; do \
- rm -f $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`; \
+ rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
done
.s.o:
ginsh: $(ginsh_OBJECTS) $(ginsh_DEPENDENCIES)
@rm -f ginsh
$(CXXLINK) $(ginsh_LDFLAGS) $(ginsh_OBJECTS) $(ginsh_LDADD) $(LIBS)
+.cc.o:
+ $(CXXCOMPILE) -c $<
+.cc.lo:
+ $(LTCXXCOMPILE) -c $<
+.ll.cc:
+ $(LEX) $(AM_LFLAGS) $(LFLAGS) $< && mv $(LEX_OUTPUT_ROOT).c $@
.yy.cc:
- $(YACC) $(YFLAGS) $< && mv y.tab.c $*.cc
+ $(YACC) $(AM_YFLAGS) $(YFLAGS) $< && mv y.tab.c $*.cc
if test -f y.tab.h; then \
if cmp -s y.tab.h $*.h; then rm -f y.tab.h; else mv y.tab.h $*.h; fi; \
else :; fi
ginsh_parser.hh: ginsh_parser.cc
-.ll.cc:
- $(LEX) $(LFLAGS) $< && mv $(LEX_OUTPUT_ROOT).c $@
-.cc.o:
- $(CXXCOMPILE) -c $<
-.cc.lo:
- $(LTCXXCOMPILE) -c $<
install-man1:
$(mkinstalldirs) $(DESTDIR)$(man1dir)
done
install-man: $(MANS)
@$(NORMAL_INSTALL)
- $(MAKE) install-man1
+ $(MAKE) $(AM_MAKEFLAGS) install-man1
uninstall-man:
@$(NORMAL_UNINSTALL)
- $(MAKE) uninstall-man1
+ $(MAKE) $(AM_MAKEFLAGS) uninstall-man1
tags: TAGS
ID: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS)'; \
+ unique=`for i in $$list; do echo $$i; done | \
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
here=`pwd` && cd $(srcdir) \
- && mkid -f$$here/ID $(SOURCES) $(HEADERS) $(LISP)
+ && mkid -f$$here/ID $$unique $(LISP)
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
tags=; \
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu ginsh/Makefile
@for file in $(DISTFILES); do \
d=$(srcdir); \
- test -f $(distdir)/$$file \
- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
- || cp -p $$d/$$file $(distdir)/$$file; \
+ if test -d $$d/$$file; then \
+ cp -pr $$d/$$file $(distdir)/$$file; \
+ else \
+ test -f $(distdir)/$$file \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
done
DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
clean-depend:
distclean-depend:
+ -rm -rf .deps
maintainer-clean-depend:
- -rm -rf .deps
%.o: %.c
@echo '$(COMPILE) -c $<'; \
- $(COMPILE) -Wp,-MD,.deps/$(*F).P -c $<
+ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+ @-cp .deps/$(*F).pp .deps/$(*F).P; \
+ tr ' ' '\012' < .deps/$(*F).pp \
+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+ >> .deps/$(*F).P; \
+ rm .deps/$(*F).pp
%.lo: %.c
@echo '$(LTCOMPILE) -c $<'; \
- $(LTCOMPILE) -Wp,-MD,.deps/$(*F).p -c $<
- @-sed -e 's/^\([^:]*\)\.o:/\1.lo \1.o:/' \
- < .deps/$(*F).p > .deps/$(*F).P
- @-rm -f .deps/$(*F).p
+ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
+ < .deps/$(*F).pp > .deps/$(*F).P; \
+ tr ' ' '\012' < .deps/$(*F).pp \
+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+ >> .deps/$(*F).P; \
+ rm -f .deps/$(*F).pp
%.o: %.cc
@echo '$(CXXCOMPILE) -c $<'; \
- $(CXXCOMPILE) -Wp,-MD,.deps/$(*F).P -c $<
+ $(CXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+ @-cp .deps/$(*F).pp .deps/$(*F).P; \
+ tr ' ' '\012' < .deps/$(*F).pp \
+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+ >> .deps/$(*F).P; \
+ rm .deps/$(*F).pp
%.lo: %.cc
@echo '$(LTCXXCOMPILE) -c $<'; \
- $(LTCXXCOMPILE) -Wp,-MD,.deps/$(*F).p -c $<
- @-sed -e 's/^\([^:]*\)\.o:/\1.lo \1.o:/' \
- < .deps/$(*F).p > .deps/$(*F).P
- @-rm -f .deps/$(*F).p
-info:
-dvi:
-check: all
- $(MAKE)
-installcheck:
-install-exec: install-binPROGRAMS
- @$(NORMAL_INSTALL)
-
-install-data: install-man
- @$(NORMAL_INSTALL)
-
-install: install-exec install-data all
- @:
-
-uninstall: uninstall-binPROGRAMS uninstall-man
-
+ $(LTCXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
+ < .deps/$(*F).pp > .deps/$(*F).P; \
+ tr ' ' '\012' < .deps/$(*F).pp \
+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+ >> .deps/$(*F).P; \
+ rm -f .deps/$(*F).pp
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am: install-binPROGRAMS
+install-exec: install-exec-am
+
+install-data-am: install-man
+install-data: install-data-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am: uninstall-binPROGRAMS uninstall-man
+uninstall: uninstall-am
+all-am: Makefile $(PROGRAMS) $(MANS)
+all-redirect: all-am
install-strip:
- $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
+ $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs:
- $(mkinstalldirs) $(DATADIR)$(bindir) $(DESTDIR)$(mandir)/man1
+ $(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(mandir)/man1
mostlyclean-generic:
- -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
clean-generic:
- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
- -rm -f Makefile $(DISTCLEANFILES)
+ -rm -f Makefile $(CONFIG_CLEAN_FILES)
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
- -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
-mostlyclean: mostlyclean-binPROGRAMS mostlyclean-compile \
+ -test -z "ginsh_lexerllginsh_parserhhginsh_parsercc" || rm -f ginsh_lexerll ginsh_parserhh ginsh_parsercc
+mostlyclean-am: mostlyclean-binPROGRAMS mostlyclean-compile \
mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
mostlyclean-generic
-clean: clean-binPROGRAMS clean-compile clean-libtool clean-tags \
- clean-depend clean-generic mostlyclean
+mostlyclean: mostlyclean-am
+
+clean-am: clean-binPROGRAMS clean-compile clean-libtool clean-tags \
+ clean-depend clean-generic mostlyclean-am
-distclean: distclean-binPROGRAMS distclean-compile distclean-libtool \
- distclean-tags distclean-depend distclean-generic clean
- -rm -f config.status
+clean: clean-am
+
+distclean-am: distclean-binPROGRAMS distclean-compile distclean-libtool \
+ distclean-tags distclean-depend distclean-generic \
+ clean-am
-rm -f libtool
-maintainer-clean: maintainer-clean-binPROGRAMS maintainer-clean-compile \
- maintainer-clean-libtool maintainer-clean-tags \
- maintainer-clean-depend maintainer-clean-generic \
- distclean
+distclean: distclean-am
+
+maintainer-clean-am: maintainer-clean-binPROGRAMS \
+ maintainer-clean-compile maintainer-clean-libtool \
+ maintainer-clean-tags maintainer-clean-depend \
+ maintainer-clean-generic distclean-am
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
+maintainer-clean: maintainer-clean-am
+
.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
mostlyclean-compile distclean-compile clean-compile \
clean-libtool maintainer-clean-libtool install-man1 uninstall-man1 \
install-man uninstall-man tags mostlyclean-tags distclean-tags \
clean-tags maintainer-clean-tags distdir mostlyclean-depend \
-distclean-depend clean-depend maintainer-clean-depend info dvi \
-installcheck install-exec install-data install uninstall all \
-installdirs mostlyclean-generic distclean-generic clean-generic \
+distclean-depend clean-depend maintainer-clean-depend info-am info \
+dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+install-exec install-data-am install-data install-am install \
+uninstall-am uninstall all-redirect all-am all installdirs \
+mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean