ac_help="$ac_help
--disable-libtool-lock avoid locking (might break parallel builds)"
ac_help="$ac_help
- --enable-html-doc build HTML documentation [default=yes]"
+ --enable-html-doc build HTML documentation [default=no]"
ac_help="$ac_help
- --enable-ps-doc build PostScript documentation [default=yes]"
+ --enable-ps-doc build PostScript documentation [default=no]"
ac_help="$ac_help
--with-cint=CINTSYSDIR build GiNaC-cint C++ interpreter [default=no]"
GINACLIB_MAJOR_VERSION=0
-GINACLIB_MINOR_VERSION=5
-GINACLIB_MICRO_VERSION=3
-GINACLIB_INTERFACE_AGE=3
-GINACLIB_BINARY_AGE=3
+GINACLIB_MINOR_VERSION=6
+GINACLIB_MICRO_VERSION=4
+GINACLIB_INTERFACE_AGE=0
+GINACLIB_BINARY_AGE=1
GINACLIB_VERSION=$GINACLIB_MAJOR_VERSION.$GINACLIB_MINOR_VERSION.$GINACLIB_MICRO_VERSION
echo "$ac_t""no" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
+
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1555: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1556: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1571: checking for BSD-compatible nm" >&5
+echo "configure:1572: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
NM="$ac_cv_path_NM"
echo "$ac_t""$NM" 1>&6
+
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1607: checking whether ln -s works" >&5
+echo "configure:1609: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
-case "$target" in
-NONE) lt_target="$host" ;;
-*) lt_target="$target" ;;
-esac
-
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
-case "$lt_target" in
+case "$host" in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 1656 "configure"' > conftest.$ac_ext
- if { (eval echo configure:1657: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 1653 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:1654: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1678: checking whether the C compiler needs -belf" >&5
+echo "configure:1675: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- cat > conftest.$ac_ext <<EOF
-#line 1683 "configure"
+
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ cat > conftest.$ac_ext <<EOF
+#line 1688 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:1690: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1695: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
lt_cv_cc_needs_belf=no
fi
rm -f conftest*
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
fi
echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
# Reload cache, that may have been modified by ltconfig
exec 5>>./config.log
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1792: checking how to run the C preprocessor" >&5
+echo "configure:1804: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1807 "configure"
+#line 1819 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1813: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1825: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1824 "configure"
+#line 1836 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1830: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1842: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 1841 "configure"
+#line 1853 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1847: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1859: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1877: checking for $ac_word" >&5
+echo "configure:1889: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1910: checking for $ac_word" >&5
+echo "configure:1922: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*) ac_lib=l ;;
esac
echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:1944: checking for yywrap in -l$ac_lib" >&5
+echo "configure:1956: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1952 "configure"
+#line 1964 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
yywrap()
; return 0; }
EOF
-if { (eval echo configure:1963: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1975: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking lex output file root""... $ac_c" 1>&6
-echo "configure:1986: checking lex output file root" >&5
+echo "configure:1998: checking lex output file root" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
-echo "configure:2007: checking whether yytext is a pointer" >&5
+echo "configure:2019: checking whether yytext is a pointer" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="$LIBS $LEXLIB"
cat > conftest.$ac_ext <<EOF
-#line 2019 "configure"
+#line 2031 "configure"
#include "confdefs.h"
`cat $LEX_OUTPUT_ROOT.c`
int main() {
; return 0; }
EOF
-if { (eval echo configure:2026: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2038: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_prog_lex_yytext_pointer=yes
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2052: checking for $ac_word" >&5
+echo "configure:2064: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
enableval="$enable_html_doc"
:
else
- enable_html_doc=yes
+ enable_html_doc=no
fi
# Check whether --enable-ps-doc or --disable-ps-doc was given.
enableval="$enable_ps_doc"
:
else
- enable_ps_doc=yes
+ enable_ps_doc=no
fi
# Check whether --with-cint or --without-cint was given.
echo $ac_n "checking size of long""... $ac_c" 1>&6
-echo "configure:2109: checking size of long" >&5
+echo "configure:2121: checking size of long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_long=4
else
cat > conftest.$ac_ext <<EOF
-#line 2117 "configure"
+#line 2129 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:2128: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2140: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long=`cat conftestval`
else
echo $ac_n "checking size of long long""... $ac_c" 1>&6
-echo "configure:2148: checking size of long long" >&5
+echo "configure:2160: checking size of long long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_long_long=8
else
cat > conftest.$ac_ext <<EOF
-#line 2156 "configure"
+#line 2168 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:2167: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2179: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long_long=`cat conftestval`
else
echo $ac_n "checking size of long double""... $ac_c" 1>&6
-echo "configure:2187: checking size of long double" >&5
+echo "configure:2199: checking size of long double" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long_double'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_long_double=12
else
cat > conftest.$ac_ext <<EOF
-#line 2195 "configure"
+#line 2207 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:2206: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2218: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long_double=`cat conftestval`
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2238: checking for $ac_hdr" >&5
+echo "configure:2250: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2243 "configure"
+#line 2255 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2248: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2260: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2278: checking for $ac_hdr" >&5
+echo "configure:2290: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2283 "configure"
+#line 2295 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2288: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2300: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
"
ginac_warning=yes
fi
-save_LIBS=$LIBS
-echo $ac_n "checking for readline in -lreadline""... $ac_c" 1>&6
-echo "configure:2323: checking for readline in -lreadline" >&5
-ac_lib_var=`echo readline'_'readline | sed 'y%./+-%__p_%'`
+LIBTERMCAP=
+for ac_func in tgetent
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:2337: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2342 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:2368: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+if test "x$ac_cv_func_tgetent" = "xyes"; then
+ :
+else
+ echo $ac_n "checking for tgetent in -lncurses""... $ac_c" 1>&6
+echo "configure:2396: checking for tgetent in -lncurses" >&5
+ac_lib_var=`echo ncurses'_'tgetent | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
-LIBS="-lreadline $LIBS"
+LIBS="-lncurses $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2331 "configure"
+#line 2404 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
-char readline();
+char tgetent();
int main() {
-readline()
+tgetent()
; return 0; }
EOF
-if { (eval echo configure:2345: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2418: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
- ac_tr_lib=HAVE_LIB`echo readline | sed -e 's/[^a-zA-Z0-9_]/_/g' \
- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_lib 1
-EOF
+ LIBTERMCAP="-lncurses"
+else
+ echo "$ac_t""no" 1>&6
+fi
- LIBS="-lreadline $LIBS"
+ if test -z "$LIBTERMCAP"; then
+ echo $ac_n "checking for tgetent in -ltermcap""... $ac_c" 1>&6
+echo "configure:2440: checking for tgetent in -ltermcap" >&5
+ac_lib_var=`echo termcap'_'tgetent | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ltermcap $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2448 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char tgetent();
+int main() {
+tgetent()
+; return 0; }
+EOF
+if { (eval echo configure:2462: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBTERMCAP="-ltermcap"
else
echo "$ac_t""no" 1>&6
fi
-if test "x${ac_cv_lib_readline_readline}" != "xyes"; then
-
-ginac_warning_txt="$ginac_warning_txt
-== I could not find libreadline (needed by ginsh).
-"
-ginac_warning=yes
+ fi
fi
-GINSH_LIBS=$LIBS
-LIBS=$save_LIBS
-echo $ac_n "checking for cout in -lstdc++""... $ac_c" 1>&6
-echo "configure:2384: checking for cout in -lstdc++" >&5
-ac_lib_var=`echo stdc++'_'cout | sed 'y%./+-%__p_%'`
+save_LIBS=$LIBS
+LIBS="$LIBTERMCAP $LIBS"
+echo $ac_n "checking for readline in -lreadline""... $ac_c" 1>&6
+echo "configure:2489: checking for readline in -lreadline" >&5
+ac_lib_var=`echo readline'_'readline | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
-LIBS="-lstdc++ $LIBS"
+LIBS="-lreadline $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2392 "configure"
+#line 2497 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
-char cout();
+char readline();
int main() {
-cout()
+readline()
; return 0; }
EOF
-if { (eval echo configure:2406: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2511: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
- ac_tr_lib=HAVE_LIB`echo stdc++ | sed -e 's/[^a-zA-Z0-9_]/_/g' \
+ ac_tr_lib=HAVE_LIB`echo readline | sed -e 's/[^a-zA-Z0-9_]/_/g' \
-e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF
- LIBS="-lstdc++ $LIBS"
+ LIBS="-lreadline $LIBS"
else
echo "$ac_t""no" 1>&6
fi
+if test "x${ac_cv_lib_readline_readline}" != "xyes"; then
+
+ginac_warning_txt="$ginac_warning_txt
+== I could not find libreadline (needed by ginsh).
+"
+ginac_warning=yes
+fi
+GINSH_LIBS=$LIBS
+LIBS=$save_LIBS
+
for ac_hdr in iostream vector map string list typeinfo iterator stdexcept algorithm
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2438: checking for $ac_hdr" >&5
+echo "configure:2553: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2443 "configure"
+#line 2558 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2448: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2563: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2479: checking for $ac_hdr" >&5
+echo "configure:2594: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2484 "configure"
+#line 2599 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2489: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2604: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2521: checking for $ac_hdr" >&5
+echo "configure:2636: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2526 "configure"
+#line 2641 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2531: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2646: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2558: checking for $ac_hdr" >&5
+echo "configure:2673: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2563 "configure"
+#line 2678 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2568: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2683: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for doublefactorial in -lcln""... $ac_c" 1>&6
-echo "configure:2603: checking for doublefactorial in -lcln" >&5
+echo "configure:2718: checking for doublefactorial in -lcln" >&5
saved_LIBS="${LIBS}"
if eval "test \"`echo '$''{'ginac_cv_lib_cln_link'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
case "${ac_cv_header_cln_cln_h}" in
"yes")
cat > conftest.$ac_ext <<EOF
-#line 2612 "configure"
+#line 2727 "configure"
#include "confdefs.h"
-#include <cln/cln.h>
+#include <cln/cl_integer.h>
int main() {
doublefactorial(2);
; return 0; }
EOF
-if { (eval echo configure:2619: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2734: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ginac_cv_lib_cln_link="-lcln"
else
;;
*)
cat > conftest.$ac_ext <<EOF
-#line 2632 "configure"
+#line 2747 "configure"
#include "confdefs.h"
-#include <cln.h>
+#include <cl_integer.h>
int main() {
doublefactorial(2);
; return 0; }
EOF
-if { (eval echo configure:2639: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2754: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ginac_cv_lib_cln_link="-lcln"
else
echo "$ac_t""no" 1>&6
ginac_error_txt="$ginac_error_txt
-** I could not successfully link a test-program against libcln and run it.
+** I could not successfully link a test-program against libcln.
You either need to set \$LDFLAGS or install/update the CLN library.
"
ginac_error=yes
# Extract the first word of "doxygen", so it can be a program name with args.
set dummy doxygen; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2680: checking for $ac_word" >&5
+echo "configure:2795: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_DOXYGEN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "latex", so it can be a program name with args.
set dummy latex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2716: checking for $ac_word" >&5
+echo "configure:2831: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_LATEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "makeindex", so it can be a program name with args.
set dummy makeindex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2752: checking for $ac_word" >&5
+echo "configure:2867: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MAKEINDEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dvips", so it can be a program name with args.
set dummy dvips; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2788: checking for $ac_word" >&5
+echo "configure:2903: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_DVIPS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "fig2dev", so it can be a program name with args.
set dummy fig2dev; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2824: checking for $ac_word" >&5
+echo "configure:2939: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_FIG2DEV'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
-LIBGINACCINT=
GINACCINTDIR=
if test "x$with_cint" != "xno"; then
- if test "x$enable_static" != "xyes"; then
- { echo "configure: error: currently GiNaC-cint needs to build a static libginac" 1>&2; exit 1; }
- fi
if test "x$with_cint" = "xyes"; then
if test "x$CINTSYSDIR" = "x"; then
{ echo "configure: error: please export \$CINTSYSDIR or specify --with-cint=CINTSYSDIR" 1>&2; exit 1; }
# Extract the first word of "cint", so it can be a program name with args.
set dummy cint; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2892: checking for $ac_word" >&5
+echo "configure:3003: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_CINT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "makecint", so it can be a program name with args.
set dummy makecint; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2928: checking for $ac_word" >&5
+echo "configure:3039: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MAKECINT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""creating cint/Makefile" 1>&6
(cd cint && \
$MAKECINT -mk Makefile.makecint -o ginaccint.bin -m \
- -D OBSCURE_CINT_HACK -D CINT_CONVERSION_WORKAROUND -D NO_NAMESPACE_GINAC \
- -I .. -I $CINTSYSDIR -m -H ../ginac/ginac.h dummies.h \
- -C++ dummies.cpp -C++ ginaccint.bin.cpp \
- -l ./libginac.a -lcln -cint -M0x10; \
+ -D OBSCURE_CINT_HACK "$CPPFLAGS" -cc "$CXXFLAGS" \
+ -I .. -I $CINTSYSDIR -m -H ../ginac/ginac.h \
+ -C++ ginaccint.bin.cpp \
+ -l -L../ginac/.libs -lginac -lcln \
+ -cint -M0x10; \
cd ..)
- LIBGINACCINT="libginac.a"
GINACCINTDIR="cint"
else
{ echo "configure: error: Cannot configure GiNaC-cint" 1>&2; exit 1; }
-
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
GiNaC.spec
ginac-config
ginac/Makefile
+ginac/version.h
check/Makefile
ginsh/Makefile
tools/Makefile
doc/tutorial/Makefile
doc/reference/Makefile
cint/Makefile
-cint/ginaccint
+cint/launch.h
config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
s%@build_os@%$build_os%g
s%@RANLIB@%$RANLIB%g
s%@CC@%$CC%g
+s%@LD@%$LD%g
+s%@NM@%$NM%g
s%@LN_S@%$LN_S%g
s%@LIBTOOL@%$LIBTOOL%g
s%@LEX@%$LEX%g
s%@CPP@%$CPP%g
s%@LEX_OUTPUT_ROOT@%$LEX_OUTPUT_ROOT%g
s%@YACC@%$YACC%g
+s%@LIBTERMCAP@%$LIBTERMCAP%g
s%@GINSH_LIBS@%$GINSH_LIBS%g
s%@GINACLIB_CPPFLAGS@%$GINACLIB_CPPFLAGS%g
s%@GINACLIB_LIBS@%$GINACLIB_LIBS%g
s%@CINT@%$CINT%g
s%@MAKECINT@%$MAKECINT%g
s%@CINTSYSDIR@%$CINTSYSDIR%g
-s%@LIBGINACCINT@%$LIBGINACCINT%g
s%@GINACCINTDIR@%$GINACCINTDIR%g
CEOF
GiNaC.spec
ginac-config
ginac/Makefile
+ginac/version.h
check/Makefile
ginsh/Makefile
tools/Makefile
doc/tutorial/Makefile
doc/reference/Makefile
cint/Makefile
-cint/ginaccint
+cint/launch.h
"}
EOF
cat >> $CONFIG_STATUS <<\EOF
EOF
cat >> $CONFIG_STATUS <<\EOF
test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
-chmod +x ginac-config cint/ginaccint
+chmod +x ginac-config
exit 0
EOF
chmod +x $CONFIG_STATUS
if test "x${ginac_error}" = "xyes"; then
- echo "**** The following problems have been detected by configure."
- echo "**** Please check the messages below before running \"make\"."
- echo "**** (see the section 'Common Problems' in the INSTALL file)"
- echo "$ginac_error_txt"
- if test "x${ginac_warning_txt}" != "x"; then
- echo "${ginac_warning_txt}"
- fi
- echo "deleting cache ${cache_file}"
- rm -f $cache_file
- else
- if test x$ginac_warning = xyes; then
- echo "=== The following minor problems have been detected by configure."
- echo "=== Please check the messages below before running \"make\"."
- echo "=== (see the section 'Common Problems' in the INSTALL file)"
- echo "$ginac_warning_txt"
+ echo "**** The following problems have been detected by configure."
+ echo "**** Please check the messages below before running \"make\"."
+ echo "**** (see the section 'Common Problems' in the INSTALL file)"
+ echo "$ginac_error_txt"
+ if test "x${ginac_warning_txt}" != "x"; then
+ echo "${ginac_warning_txt}"
fi
- echo "Configuration of GiNaC $VERSION done. Now type \"make\"."
+ echo "deleting cache ${cache_file}"
+ rm -f $cache_file
+ else
+ if test x$ginac_warning = xyes; then
+ echo "=== The following minor problems have been detected by configure."
+ echo "=== Please check the messages below before running \"make\"."
+ echo "=== (see the section 'Common Problems' in the INSTALL file)"
+ echo "$ginac_warning_txt"
+ fi
+ echo "Configuration of GiNaC $VERSION done. Now type \"make\"."
fi
git://www.ginac.de / ginac.git / blobdiff