ac_help="$ac_help
--disable-libtool-lock avoid locking (might break parallel builds)"
ac_help="$ac_help
- --enable-html-doc build HTML documentation [default=yes]"
+ --enable-html-doc build HTML documentation [default=no]"
ac_help="$ac_help
- --enable-ps-doc build PostScript documentation [default=yes]"
+ --enable-ps-doc build PostScript documentation [default=no]"
ac_help="$ac_help
--with-cint=CINTSYSDIR build GiNaC-cint C++ interpreter [default=no]"
GINACLIB_MAJOR_VERSION=0
-GINACLIB_MINOR_VERSION=5
+GINACLIB_MINOR_VERSION=6
GINACLIB_MICRO_VERSION=0
GINACLIB_INTERFACE_AGE=0
GINACLIB_BINARY_AGE=0
echo "$ac_t""no" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1556: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1555: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1572: checking for BSD-compatible nm" >&5
+echo "configure:1571: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
NM="$ac_cv_path_NM"
echo "$ac_t""$NM" 1>&6
-
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1609: checking whether ln -s works" >&5
+echo "configure:1607: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
-case "$host" in
+case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 1653 "configure"' > conftest.$ac_ext
- if { (eval echo configure:1654: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 1656 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:1657: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1675: checking whether the C compiler needs -belf" >&5
+echo "configure:1678: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1680 "configure"
+#line 1683 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:1687: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1690: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
# Reload cache, that may have been modified by ltconfig
exec 5>>./config.log
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1789: checking how to run the C preprocessor" >&5
+echo "configure:1792: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1804 "configure"
+#line 1807 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1810: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1813: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1821 "configure"
+#line 1824 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1827: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1830: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 1838 "configure"
+#line 1841 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1844: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1847: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1874: checking for $ac_word" >&5
+echo "configure:1877: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1907: checking for $ac_word" >&5
+echo "configure:1910: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*) ac_lib=l ;;
esac
echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:1941: checking for yywrap in -l$ac_lib" >&5
+echo "configure:1944: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1949 "configure"
+#line 1952 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
yywrap()
; return 0; }
EOF
-if { (eval echo configure:1960: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1963: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking lex output file root""... $ac_c" 1>&6
-echo "configure:1983: checking lex output file root" >&5
+echo "configure:1986: checking lex output file root" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
-echo "configure:2004: checking whether yytext is a pointer" >&5
+echo "configure:2007: checking whether yytext is a pointer" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="$LIBS $LEXLIB"
cat > conftest.$ac_ext <<EOF
-#line 2016 "configure"
+#line 2019 "configure"
#include "confdefs.h"
`cat $LEX_OUTPUT_ROOT.c`
int main() {
; return 0; }
EOF
-if { (eval echo configure:2023: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2026: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_prog_lex_yytext_pointer=yes
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2049: checking for $ac_word" >&5
+echo "configure:2052: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
enableval="$enable_html_doc"
:
else
- enable_html_doc=yes
+ enable_html_doc=no
fi
# Check whether --enable-ps-doc or --disable-ps-doc was given.
enableval="$enable_ps_doc"
:
else
- enable_ps_doc=yes
+ enable_ps_doc=no
fi
# Check whether --with-cint or --without-cint was given.
echo $ac_n "checking size of long""... $ac_c" 1>&6
-echo "configure:2106: checking size of long" >&5
+echo "configure:2109: checking size of long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_long=4
else
cat > conftest.$ac_ext <<EOF
-#line 2114 "configure"
+#line 2117 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:2125: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2128: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long=`cat conftestval`
else
echo $ac_n "checking size of long long""... $ac_c" 1>&6
-echo "configure:2145: checking size of long long" >&5
+echo "configure:2148: checking size of long long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_long_long=8
else
cat > conftest.$ac_ext <<EOF
-#line 2153 "configure"
+#line 2156 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:2164: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2167: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long_long=`cat conftestval`
else
echo $ac_n "checking size of long double""... $ac_c" 1>&6
-echo "configure:2184: checking size of long double" >&5
+echo "configure:2187: checking size of long double" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long_double'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_long_double=12
else
cat > conftest.$ac_ext <<EOF
-#line 2192 "configure"
+#line 2195 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:2203: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2206: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long_double=`cat conftestval`
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2235: checking for $ac_hdr" >&5
+echo "configure:2238: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2240 "configure"
+#line 2243 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2245: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2248: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2275: checking for $ac_hdr" >&5
+echo "configure:2278: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2280 "configure"
+#line 2283 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2285: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2288: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
done
+if test "x${ac_cv_header_readline_readline_h}" != "xyes" -o "x${ac_cv_header_readline_history_h}" != "xyes"; then
+
+ginac_warning_txt="$ginac_warning_txt
+== I could not find the headers for libreadline (needed for building ginsh).
+"
+ginac_warning=yes
+fi
+LIBTERMCAP=
+for ac_func in tgetent
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:2325: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2330 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:2356: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+if test "x$ac_cv_func_tgetent" = "xyes"; then
+ :
+else
+ echo $ac_n "checking for tgetent in -lncurses""... $ac_c" 1>&6
+echo "configure:2384: checking for tgetent in -lncurses" >&5
+ac_lib_var=`echo ncurses'_'tgetent | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lncurses $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2392 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char tgetent();
+
+int main() {
+tgetent()
+; return 0; }
+EOF
+if { (eval echo configure:2406: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBTERMCAP="-lncurses"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test -z "$LIBTERMCAP"; then
+ echo $ac_n "checking for tgetent in -ltermcap""... $ac_c" 1>&6
+echo "configure:2428: checking for tgetent in -ltermcap" >&5
+ac_lib_var=`echo termcap'_'tgetent | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ltermcap $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2436 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char tgetent();
+
+int main() {
+tgetent()
+; return 0; }
+EOF
+if { (eval echo configure:2450: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBTERMCAP="-ltermcap"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+fi
+
+
save_LIBS=$LIBS
+LIBS="$LIBTERMCAP $LIBS"
echo $ac_n "checking for readline in -lreadline""... $ac_c" 1>&6
-echo "configure:2313: checking for readline in -lreadline" >&5
+echo "configure:2477: checking for readline in -lreadline" >&5
ac_lib_var=`echo readline'_'readline | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lreadline $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2321 "configure"
+#line 2485 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
readline()
; return 0; }
EOF
-if { (eval echo configure:2335: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2499: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
fi
+if test "x${ac_cv_lib_readline_readline}" != "xyes"; then
+
+ginac_warning_txt="$ginac_warning_txt
+== I could not find libreadline (needed by ginsh).
+"
+ginac_warning=yes
+fi
GINSH_LIBS=$LIBS
LIBS=$save_LIBS
echo $ac_n "checking for cout in -lstdc++""... $ac_c" 1>&6
-echo "configure:2367: checking for cout in -lstdc++" >&5
+echo "configure:2538: checking for cout in -lstdc++" >&5
ac_lib_var=`echo stdc++'_'cout | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lstdc++ $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2375 "configure"
+#line 2546 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
cout()
; return 0; }
EOF
-if { (eval echo configure:2389: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2560: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2421: checking for $ac_hdr" >&5
+echo "configure:2592: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2426 "configure"
+#line 2597 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2431: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2602: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2462: checking for $ac_hdr" >&5
+echo "configure:2633: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2467 "configure"
+#line 2638 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2472: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2643: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2504: checking for $ac_hdr" >&5
+echo "configure:2675: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2509 "configure"
+#line 2680 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2514: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2685: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2541: checking for $ac_hdr" >&5
+echo "configure:2712: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2546 "configure"
+#line 2717 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2551: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2722: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for doublefactorial in -lcln""... $ac_c" 1>&6
-echo "configure:2586: checking for doublefactorial in -lcln" >&5
+echo "configure:2757: checking for doublefactorial in -lcln" >&5
saved_LIBS="${LIBS}"
if eval "test \"`echo '$''{'ginac_cv_lib_cln_link'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
case "${ac_cv_header_cln_cln_h}" in
"yes")
cat > conftest.$ac_ext <<EOF
-#line 2595 "configure"
+#line 2766 "configure"
#include "confdefs.h"
-#include <cln/cln.h>
+#include <cln/cl_integer.h>
int main() {
doublefactorial(2);
; return 0; }
EOF
-if { (eval echo configure:2602: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2773: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ginac_cv_lib_cln_link="-lcln"
else
;;
*)
cat > conftest.$ac_ext <<EOF
-#line 2615 "configure"
+#line 2786 "configure"
#include "confdefs.h"
-#include <cln.h>
+#include <cl_integer.h>
int main() {
doublefactorial(2);
; return 0; }
EOF
-if { (eval echo configure:2622: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2793: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ginac_cv_lib_cln_link="-lcln"
else
"fail")
LIBS="${saved_LIBS}"
echo "$ac_t""no" 1>&6
- { echo "configure: error: You either need to set \$LDFLAGS or update CLN" 1>&2; exit 1; }
- ;;
- *)
- LIBS="${saved_LIBS}"
- echo "configure: warning: you found a bug in the configure script!" 1>&2
+
+ginac_error_txt="$ginac_error_txt
+** I could not successfully link a test-program against libcln and run it.
+ You either need to set \$LDFLAGS or install/update the CLN library.
+"
+ginac_error=yes
;;
esac
# Extract the first word of "doxygen", so it can be a program name with args.
set dummy doxygen; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2662: checking for $ac_word" >&5
+echo "configure:2834: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_DOXYGEN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "latex", so it can be a program name with args.
set dummy latex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2698: checking for $ac_word" >&5
+echo "configure:2870: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_LATEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "makeindex", so it can be a program name with args.
set dummy makeindex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2734: checking for $ac_word" >&5
+echo "configure:2906: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MAKEINDEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dvips", so it can be a program name with args.
set dummy dvips; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2770: checking for $ac_word" >&5
+echo "configure:2942: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_DVIPS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "fig2dev", so it can be a program name with args.
set dummy fig2dev; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2806: checking for $ac_word" >&5
+echo "configure:2978: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_FIG2DEV'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
TUTORIAL_TARGETS=
REFERENCE_TARGETS=
-if [ "x$enable_html_doc" = "xyes" ]; then
+if test "x${enable_html_doc}" = "xyes"; then
TUTORIAL_TARGETS="$TUTORIAL_TARGETS ginac.html"
if [ "$DOXYGEN" ]; then
REFERENCE_TARGETS="$REFERENCE_TARGETS index.html"
fi
fi
-if [ "x$enable_ps_doc" = "xyes" ]; then
+if test "x${enable_ps_doc}" = "xyes"; then
TUTORIAL_TARGETS="$TUTORIAL_TARGETS ginac.ps"
if [ "$DOXYGEN" ]; then
REFERENCE_TARGETS="$REFERENCE_TARGETS reference.ps"
-LIBGINACCINT=
GINACCINTDIR=
-if [ "x$with_cint" != "xno" ]; then
- if [ "x$enable_static" != "xyes" ]; then
+if test "x$with_cint" != "xno"; then
+ if test "x$enable_static" != "xyes"; then
{ echo "configure: error: currently GiNaC-cint needs to build a static libginac" 1>&2; exit 1; }
fi
- if [ "x$with_cint" = "xyes" ]; then
- if [ "x$CINTSYSDIR" = "x" ]; then
+ if test "x$with_cint" = "xyes"; then
+ if test "x$CINTSYSDIR" = "x"; then
{ echo "configure: error: please export \$CINTSYSDIR or specify --with-cint=CINTSYSDIR" 1>&2; exit 1; }
fi
else
# Extract the first word of "cint", so it can be a program name with args.
set dummy cint; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2874: checking for $ac_word" >&5
+echo "configure:3045: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_CINT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "makecint", so it can be a program name with args.
set dummy makecint; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2910: checking for $ac_word" >&5
+echo "configure:3081: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MAKECINT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if [ "$CINT" -a "$MAKECINT" ]; then
echo "$ac_t""creating cint/Makefile" 1>&6
(cd cint && \
- $MAKECINT -mk Makefile.makecint -o ginaccint -m \
- -D OBSCURE_CINT_HACK -D NO_NAMESPACE_GINAC \
- -I .. -I $CINTSYSDIR -m -H ../ginac/ginac.h dummies.h \
- -C++ dummies.cpp -C++ ginaccint.cpp \
- -l ./libginac.a -lcln -cint -M0x10; \
+ $MAKECINT -mk Makefile.makecint -o ginaccint.bin -m \
+ -D OBSCURE_CINT_HACK \
+ -I .. -I $CINTSYSDIR -m -H ../ginac/ginac.h \
+ -C++ ginaccint.bin.cpp \
+ -l -L../ginac/.libs -lginac -lcln \
+ -cint -M0x10; \
cd ..)
- LIBGINACCINT="libginac.a"
GINACCINTDIR="cint"
else
{ echo "configure: error: Cannot configure GiNaC-cint" 1>&2; exit 1; }
GiNaC.spec
ginac-config
ginac/Makefile
+ginac/version.h
check/Makefile
ginsh/Makefile
tools/Makefile
doc/tutorial/Makefile
doc/reference/Makefile
cint/Makefile
+cint/ginaccint
config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
s%@build_os@%$build_os%g
s%@RANLIB@%$RANLIB%g
s%@CC@%$CC%g
-s%@LD@%$LD%g
-s%@NM@%$NM%g
s%@LN_S@%$LN_S%g
s%@LIBTOOL@%$LIBTOOL%g
s%@LEX@%$LEX%g
s%@CPP@%$CPP%g
s%@LEX_OUTPUT_ROOT@%$LEX_OUTPUT_ROOT%g
s%@YACC@%$YACC%g
+s%@LIBTERMCAP@%$LIBTERMCAP%g
s%@GINSH_LIBS@%$GINSH_LIBS%g
s%@GINACLIB_CPPFLAGS@%$GINACLIB_CPPFLAGS%g
s%@GINACLIB_LIBS@%$GINACLIB_LIBS%g
s%@REFERENCE_TARGETS@%$REFERENCE_TARGETS%g
s%@CINT@%$CINT%g
s%@MAKECINT@%$MAKECINT%g
-s%@LIBGINACCINT@%$LIBGINACCINT%g
+s%@CINTSYSDIR@%$CINTSYSDIR%g
s%@GINACCINTDIR@%$GINACCINTDIR%g
CEOF
GiNaC.spec
ginac-config
ginac/Makefile
+ginac/version.h
check/Makefile
ginsh/Makefile
tools/Makefile
doc/tutorial/Makefile
doc/reference/Makefile
cint/Makefile
+cint/ginaccint
"}
EOF
cat >> $CONFIG_STATUS <<\EOF
EOF
cat >> $CONFIG_STATUS <<\EOF
test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
-chmod +x ginac-config
+chmod +x ginac-config cint/ginaccint
exit 0
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-echo "Configuration done. Now type \"make\"."
+
+if test "x${ginac_error}" = "xyes"; then
+ echo "**** The following problems have been detected by configure."
+ echo "**** Please check the messages below before running \"make\"."
+ echo "**** (see the section 'Common Problems' in the INSTALL file)"
+ echo "$ginac_error_txt"
+ if test "x${ginac_warning_txt}" != "x"; then
+ echo "${ginac_warning_txt}"
+ fi
+ echo "deleting cache ${cache_file}"
+ rm -f $cache_file
+ else
+ if test x$ginac_warning = xyes; then
+ echo "=== The following minor problems have been detected by configure."
+ echo "=== Please check the messages below before running \"make\"."
+ echo "=== (see the section 'Common Problems' in the INSTALL file)"
+ echo "$ginac_warning_txt"
+ fi
+ echo "Configuration of GiNaC $VERSION done. Now type \"make\"."
+fi
git://www.ginac.de / ginac.git / blobdiff