ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
-ac_help="$ac_help
- --enable-help-doc build HTML documentation [default=yes]"
-ac_help="$ac_help
- --enable-ps-doc build PostScript documentation [default=no]"
ac_help="$ac_help
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer"
--with-gnu-ld assume the C compiler uses GNU ld [default=no]"
ac_help="$ac_help
--disable-libtool-lock avoid locking (might break parallel builds)"
+ac_help="$ac_help
+ --enable-html-doc build HTML documentation [default=yes]"
+ac_help="$ac_help
+ --enable-ps-doc build PostScript documentation [default=yes]"
+ac_help="$ac_help
+ --with-cint=CINTSYSDIR build GiNaC-cint C++ interpreter [default=no]"
# Initialize some variables set by options.
# The variables have the same names as the options, with
-# Check whether --enable-html-doc or --disable-html-doc was given.
-if test "${enable_html_doc+set}" = set; then
- enableval="$enable_html_doc"
- :
-else
- enable_html_doc=yes
-fi
-# Check whether --enable-ps-doc or --disable-ps-doc was given.
-if test "${enable_ps_doc+set}" = set; then
- enableval="$enable_ps_doc"
- :
-else
- enable_ps_doc=no
-fi
+GINACLIB_MAJOR_VERSION=0
+GINACLIB_MINOR_VERSION=5
+GINACLIB_MICRO_VERSION=2
+GINACLIB_INTERFACE_AGE=2
+GINACLIB_BINARY_AGE=2
+GINACLIB_VERSION=$GINACLIB_MAJOR_VERSION.$GINACLIB_MINOR_VERSION.$GINACLIB_MICRO_VERSION
-GINACLIB_MAJOR_VERSION=0
-GINACLIB_MINOR_VERSION=4
-GINACLIB_MICRO_VERSION=0
-GINACLIB_INTERFACE_AGE=0
-GINACLIB_BINARY_AGE=0
-GINACLIB_VERSION=$GINACLIB_MAJOR_VERSION.$GINACLIB_MINOR_VERSION.$GINACLIB_MICRO_VERSION
+ARCHIVE_VERSION=0
+ARCHIVE_AGE=0
+
+
+
+cat >> confdefs.h <<EOF
+#define ARCHIVE_VERSION $ARCHIVE_VERSION
+EOF
+
+cat >> confdefs.h <<EOF
+#define ARCHIVE_AGE $ARCHIVE_AGE
+EOF
LT_RELEASE=$GINACLIB_MAJOR_VERSION.$GINACLIB_MINOR_VERSION
echo "$ac_t""no" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1556: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1555: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1572: checking for BSD-compatible nm" >&5
+echo "configure:1571: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
NM="$ac_cv_path_NM"
echo "$ac_t""$NM" 1>&6
-
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1609: checking whether ln -s works" >&5
+echo "configure:1607: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
-case "$host" in
+case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 1653 "configure"' > conftest.$ac_ext
- if { (eval echo configure:1654: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 1656 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:1657: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1675: checking whether the C compiler needs -belf" >&5
+echo "configure:1678: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1680 "configure"
+#line 1683 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:1687: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1690: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
# Reload cache, that may have been modified by ltconfig
exec 5>>./config.log
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1789: checking how to run the C preprocessor" >&5
+echo "configure:1792: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1804 "configure"
+#line 1807 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1810: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1813: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1821 "configure"
+#line 1824 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1827: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1830: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 1838 "configure"
+#line 1841 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1844: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1847: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1874: checking for $ac_word" >&5
+echo "configure:1877: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1907: checking for $ac_word" >&5
+echo "configure:1910: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*) ac_lib=l ;;
esac
echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:1941: checking for yywrap in -l$ac_lib" >&5
+echo "configure:1944: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1949 "configure"
+#line 1952 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
yywrap()
; return 0; }
EOF
-if { (eval echo configure:1960: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1963: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking lex output file root""... $ac_c" 1>&6
-echo "configure:1983: checking lex output file root" >&5
+echo "configure:1986: checking lex output file root" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
-echo "configure:2004: checking whether yytext is a pointer" >&5
+echo "configure:2007: checking whether yytext is a pointer" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="$LIBS $LEXLIB"
cat > conftest.$ac_ext <<EOF
-#line 2016 "configure"
+#line 2019 "configure"
#include "confdefs.h"
`cat $LEX_OUTPUT_ROOT.c`
int main() {
; return 0; }
EOF
-if { (eval echo configure:2023: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2026: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_prog_lex_yytext_pointer=yes
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2049: checking for $ac_word" >&5
+echo "configure:2052: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -n "$YACC" || YACC="yacc"
+# Check whether --enable-html-doc or --disable-html-doc was given.
+if test "${enable_html_doc+set}" = set; then
+ enableval="$enable_html_doc"
+ :
+else
+ enable_html_doc=yes
+fi
+
+# Check whether --enable-ps-doc or --disable-ps-doc was given.
+if test "${enable_ps_doc+set}" = set; then
+ enableval="$enable_ps_doc"
+ :
+else
+ enable_ps_doc=yes
+fi
+
+# Check whether --with-cint or --without-cint was given.
+if test "${with_cint+set}" = set; then
+ withval="$with_cint"
+ :
+else
+ with_cint=no
+fi
+
+
echo $ac_n "checking size of long""... $ac_c" 1>&6
-echo "configure:2081: checking size of long" >&5
+echo "configure:2109: checking size of long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_long=4
else
cat > conftest.$ac_ext <<EOF
-#line 2089 "configure"
+#line 2117 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:2100: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2128: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long=`cat conftestval`
else
echo $ac_n "checking size of long long""... $ac_c" 1>&6
-echo "configure:2120: checking size of long long" >&5
+echo "configure:2148: checking size of long long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_long_long=8
else
cat > conftest.$ac_ext <<EOF
-#line 2128 "configure"
+#line 2156 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:2139: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2167: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long_long=`cat conftestval`
else
echo $ac_n "checking size of long double""... $ac_c" 1>&6
-echo "configure:2159: checking size of long double" >&5
+echo "configure:2187: checking size of long double" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long_double'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_sizeof_long_double=12
else
cat > conftest.$ac_ext <<EOF
-#line 2167 "configure"
+#line 2195 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:2178: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2206: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long_double=`cat conftestval`
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2210: checking for $ac_hdr" >&5
+echo "configure:2238: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2215 "configure"
+#line 2243 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2220: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2248: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2250: checking for $ac_hdr" >&5
+echo "configure:2278: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2255 "configure"
+#line 2283 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2260: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2288: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
done
+if test "x${ac_cv_header_readline_readline_h}" != "xyes" -o "x${ac_cv_header_readline_history_h}" != "xyes"; then
+
+ginac_warning_txt="$ginac_warning_txt
+== I could not find the headers for libreadline (needed for building ginsh).
+"
+ginac_warning=yes
+fi
save_LIBS=$LIBS
echo $ac_n "checking for readline in -lreadline""... $ac_c" 1>&6
-echo "configure:2288: checking for readline in -lreadline" >&5
+echo "configure:2323: checking for readline in -lreadline" >&5
ac_lib_var=`echo readline'_'readline | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lreadline $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2296 "configure"
+#line 2331 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
readline()
; return 0; }
EOF
-if { (eval echo configure:2310: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2345: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
fi
+if test "x${ac_cv_lib_readline_readline}" != "xyes"; then
+
+ginac_warning_txt="$ginac_warning_txt
+== I could not find libreadline (needed by ginsh).
+"
+ginac_warning=yes
+fi
GINSH_LIBS=$LIBS
LIBS=$save_LIBS
echo $ac_n "checking for cout in -lstdc++""... $ac_c" 1>&6
-echo "configure:2342: checking for cout in -lstdc++" >&5
+echo "configure:2384: checking for cout in -lstdc++" >&5
ac_lib_var=`echo stdc++'_'cout | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lstdc++ $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2350 "configure"
+#line 2392 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
cout()
; return 0; }
EOF
-if { (eval echo configure:2364: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2406: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
-for ac_hdr in iostream vector map string list typeinfo iterator strstream stdexcept algorithm
+for ac_hdr in iostream vector map string list typeinfo iterator stdexcept algorithm
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2396: checking for $ac_hdr" >&5
+echo "configure:2438: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2401 "configure"
+#line 2443 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2406: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2448: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
done
+for ac_hdr in sstream strstream
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:2479: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2484 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2489: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
- for ac_hdr in CLN/cln.h
+ for ac_hdr in cln/cln.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2439: checking for $ac_hdr" >&5
+echo "configure:2521: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2444 "configure"
+#line 2526 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2449: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2531: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2476: checking for $ac_hdr" >&5
+echo "configure:2558: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2481 "configure"
+#line 2563 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2486: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2568: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
- echo $ac_n "checking how to link with libcln""... $ac_c" 1>&6
-echo "configure:2521: checking how to link with libcln" >&5
+ echo $ac_n "checking for doublefactorial in -lcln""... $ac_c" 1>&6
+echo "configure:2603: checking for doublefactorial in -lcln" >&5
saved_LIBS="${LIBS}"
if eval "test \"`echo '$''{'ginac_cv_lib_cln_link'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LIBS="-lcln"
- case "${ac_cv_header_CLN_cln_h}" in
+ case "${ac_cv_header_cln_cln_h}" in
"yes")
cat > conftest.$ac_ext <<EOF
-#line 2530 "configure"
+#line 2612 "configure"
#include "confdefs.h"
-#include <CLN/cln.h>
+#include <cln/cln.h>
int main() {
-factorial(1);
+doublefactorial(2);
; return 0; }
EOF
-if { (eval echo configure:2537: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2619: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ginac_cv_lib_cln_link="-lcln"
else
;;
*)
cat > conftest.$ac_ext <<EOF
-#line 2550 "configure"
+#line 2632 "configure"
#include "confdefs.h"
#include <cln.h>
int main() {
-factorial(1);
+doublefactorial(2);
; return 0; }
EOF
-if { (eval echo configure:2557: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2639: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ginac_cv_lib_cln_link="-lcln"
else
case "${ginac_cv_lib_cln_link}" in
"-lcln")
- LIBS="-lcln ${saved_LIBS}"
- echo "$ac_t""-lcln" 1>&6
-
- echo $ac_n "checking whether libcln behaves sane""... $ac_c" 1>&6
-echo "configure:2578: checking whether libcln behaves sane" >&5
- if eval "test \"`echo '$''{'ginac_cv_lib_cln_integrity'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
-
- case "${ac_cv_header_CLN_cln_h}" in
- "yes")
- if test "$cross_compiling" = yes; then
- ginac_cv_lib_cln_integrity="guessing sane"
-else
- cat > conftest.$ac_ext <<EOF
-#line 2589 "configure"
-#include "confdefs.h"
-#ifdef __cplusplus
-extern "C" void exit(int);
-#endif
-#include <CLN/cln.h>
-int main() {
-cl_RA q(3); q = q/2; cl_RA p(3); p = p/2;
-if (q+p != 3) return 1; else return 0;
-}
-EOF
-if { (eval echo configure:2600: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ginac_cv_lib_cln_integrity="sane"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ginac_cv_lib_cln_integrity="insane"
-fi
-rm -fr conftest*
-fi
-
- ;;
- *)
- if test "$cross_compiling" = yes; then
- ginac_cv_lib_cln_integrity="guessing sane"
-else
- cat > conftest.$ac_ext <<EOF
-#line 2618 "configure"
-#include "confdefs.h"
-#ifdef __cplusplus
-extern "C" void exit(int);
-#endif
-#include <cln.h>
-int main() {
-cl_RA q(3); q = q/2; cl_RA p(3); p = p/2;
-if (q+p != 3) return 1; else return 0;
-}
-EOF
-if { (eval echo configure:2629: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ginac_cv_lib_cln_integrity="sane"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ginac_cv_lib_cln_integrity="insane"
-fi
-rm -fr conftest*
-fi
-
- ;;
- esac
-
-fi
-
- case "${ginac_cv_lib_cln_integrity}" in
- "sane")
- echo "$ac_t""yes" 1>&6
- ;;
- "insane")
- echo "$ac_t""no" 1>&6
- echo "configure: warning: maybe version of libcln is older than 1.0.2?" 1>&2
- ;;
- "guessing sane")
- echo "$ac_t""hopefully" 1>&6
- ;;
- *)
- echo "configure: warning: you found a bug in the configure script!" 1>&2
- ;;
- esac
-
+ LIBS="${ginac_cv_lib_cln_link} ${saved_LIBS}"
+ echo "$ac_t"""yes"" 1>&6
;;
"fail")
LIBS="${saved_LIBS}"
- echo "$ac_t""" 1>&6
- { echo "configure: error: linking with libcln failed, maybe need to set \$LDFLAGS?" 1>&2; exit 1; }
- ;;
- *)
- LIBS="${saved_LIBS}"
+ echo "$ac_t""no" 1>&6
+
+ginac_error_txt="$ginac_error_txt
+** I could not successfully link a test-program against libcln and run it.
+ You either need to set \$LDFLAGS or install/update the CLN library.
+"
+ginac_error=yes
;;
esac
+GINACLIB_CPPFLAGS=$CPPFLAGS
+GINACLIB_LIBS=$LIBS
+
+
+
# Extract the first word of "doxygen", so it can be a program name with args.
set dummy doxygen; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2677: checking for $ac_word" >&5
+echo "configure:2680: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_DOXYGEN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-# Extract the first word of "jade", so it can be a program name with args.
-set dummy jade; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2713: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_JADE'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- case "$JADE" in
- /*)
- ac_cv_path_JADE="$JADE" # Let the user override the test with a path.
- ;;
- ?:/*)
- ac_cv_path_JADE="$JADE" # Let the user override the test with a dos path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_path_JADE="$ac_dir/$ac_word"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_JADE" && ac_cv_path_JADE=""""
- ;;
-esac
-fi
-JADE="$ac_cv_path_JADE"
-if test -n "$JADE"; then
- echo "$ac_t""$JADE" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-# Extract the first word of "jadetex", so it can be a program name with args.
-set dummy jadetex; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2749: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_JADETEX'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- case "$JADETEX" in
- /*)
- ac_cv_path_JADETEX="$JADETEX" # Let the user override the test with a path.
- ;;
- ?:/*)
- ac_cv_path_JADETEX="$JADETEX" # Let the user override the test with a dos path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_path_JADETEX="$ac_dir/$ac_word"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_JADETEX" && ac_cv_path_JADETEX=""""
- ;;
-esac
-fi
-JADETEX="$ac_cv_path_JADETEX"
-if test -n "$JADETEX"; then
- echo "$ac_t""$JADETEX" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
# Extract the first word of "latex", so it can be a program name with args.
set dummy latex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2785: checking for $ac_word" >&5
+echo "configure:2716: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_LATEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "makeindex", so it can be a program name with args.
set dummy makeindex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2821: checking for $ac_word" >&5
+echo "configure:2752: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MAKEINDEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dvips", so it can be a program name with args.
set dummy dvips; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2857: checking for $ac_word" >&5
+echo "configure:2788: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_DVIPS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "fig2dev", so it can be a program name with args.
set dummy fig2dev; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2893: checking for $ac_word" >&5
+echo "configure:2824: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_FIG2DEV'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
TUTORIAL_TARGETS=
REFERENCE_TARGETS=
-if [ "x$enable_html_doc" = "xyes" ]; then
- TUTORIAL_TARGETS="$TUTORIAL_TARGETS index.html"
- REFERENCE_TARGETS="$REFERENCE_TARGETS index.html"
+if test "x${enable_html_doc}" = "xyes"; then
+ TUTORIAL_TARGETS="$TUTORIAL_TARGETS ginac.html"
+ if [ "$DOXYGEN" ]; then
+ REFERENCE_TARGETS="$REFERENCE_TARGETS index.html"
+ fi
fi
-if [ "x$enable_ps_doc" = "xyes" ]; then
-# currently doesn't work
-# TUTORIAL_TARGETS="$TUTORIAL_TARGETS tutorial.ps"
- REFERENCE_TARGETS="$REFERENCE_TARGETS reference.ps"
+if test "x${enable_ps_doc}" = "xyes"; then
+ TUTORIAL_TARGETS="$TUTORIAL_TARGETS ginac.ps"
+ if [ "$DOXYGEN" ]; then
+ REFERENCE_TARGETS="$REFERENCE_TARGETS reference.ps"
+ fi
fi
+LIBGINACCINT=
+GINACCINTDIR=
+if test "x$with_cint" != "xno"; then
+ if test "x$enable_static" != "xyes"; then
+ { echo "configure: error: currently GiNaC-cint needs to build a static libginac" 1>&2; exit 1; }
+ fi
+ if test "x$with_cint" = "xyes"; then
+ if test "x$CINTSYSDIR" = "x"; then
+ { echo "configure: error: please export \$CINTSYSDIR or specify --with-cint=CINTSYSDIR" 1>&2; exit 1; }
+ fi
+ else
+ CINTSYSDIR=$with_cint
+ export CINTSYSDIR
+ fi
+ # Extract the first word of "cint", so it can be a program name with args.
+set dummy cint; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2892: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_CINT'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$CINT" in
+ /*)
+ ac_cv_path_CINT="$CINT" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_CINT="$CINT" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$CINTSYSDIR:$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_CINT="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_CINT" && ac_cv_path_CINT=""""
+ ;;
+esac
+fi
+CINT="$ac_cv_path_CINT"
+if test -n "$CINT"; then
+ echo "$ac_t""$CINT" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ # Extract the first word of "makecint", so it can be a program name with args.
+set dummy makecint; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2928: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MAKECINT'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$MAKECINT" in
+ /*)
+ ac_cv_path_MAKECINT="$MAKECINT" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_MAKECINT="$MAKECINT" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$CINTSYSDIR:$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_MAKECINT="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_MAKECINT" && ac_cv_path_MAKECINT=""""
+ ;;
+esac
+fi
+MAKECINT="$ac_cv_path_MAKECINT"
+if test -n "$MAKECINT"; then
+ echo "$ac_t""$MAKECINT" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if [ "$CINT" -a "$MAKECINT" ]; then
+ echo "$ac_t""creating cint/Makefile" 1>&6
+ (cd cint && \
+ $MAKECINT -mk Makefile.makecint -o ginaccint.bin -m \
+ -D OBSCURE_CINT_HACK -D CINT_CONVERSION_WORKAROUND -D NO_NAMESPACE_GINAC \
+ -I .. -I $CINTSYSDIR -m -H ../ginac/ginac.h dummies.h \
+ -C++ dummies.cpp -C++ ginaccint.bin.cpp \
+ -l ./libginac.a -lcln -cint -M0x10; \
+ cd ..)
+ LIBGINACCINT="libginac.a"
+ GINACCINTDIR="cint"
+ else
+ { echo "configure: error: Cannot configure GiNaC-cint" 1>&2; exit 1; }
+ fi
+fi
+
+
+
+
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
trap 'rm -fr `echo "
Makefile
GiNaC.spec
+ginac-config
ginac/Makefile
check/Makefile
ginsh/Makefile
+tools/Makefile
doc/Makefile
doc/tutorial/Makefile
doc/reference/Makefile
+cint/Makefile
+cint/ginaccint
config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
s%@GINACLIB_INTERFACE_AGE@%$GINACLIB_INTERFACE_AGE%g
s%@GINACLIB_BINARY_AGE@%$GINACLIB_BINARY_AGE%g
s%@GINACLIB_VERSION@%$GINACLIB_VERSION%g
+s%@ARCHIVE_VERSION@%$ARCHIVE_VERSION%g
+s%@ARCHIVE_AGE@%$ARCHIVE_AGE%g
s%@LT_RELEASE@%$LT_RELEASE%g
s%@LT_CURRENT@%$LT_CURRENT%g
s%@LT_REVISION@%$LT_REVISION%g
s%@build_os@%$build_os%g
s%@RANLIB@%$RANLIB%g
s%@CC@%$CC%g
-s%@LD@%$LD%g
-s%@NM@%$NM%g
s%@LN_S@%$LN_S%g
s%@LIBTOOL@%$LIBTOOL%g
s%@LEX@%$LEX%g
s%@LEX_OUTPUT_ROOT@%$LEX_OUTPUT_ROOT%g
s%@YACC@%$YACC%g
s%@GINSH_LIBS@%$GINSH_LIBS%g
+s%@GINACLIB_CPPFLAGS@%$GINACLIB_CPPFLAGS%g
+s%@GINACLIB_LIBS@%$GINACLIB_LIBS%g
s%@DOXYGEN@%$DOXYGEN%g
-s%@JADE@%$JADE%g
-s%@JADETEX@%$JADETEX%g
s%@LATEX@%$LATEX%g
s%@MAKEINDEX@%$MAKEINDEX%g
s%@DVIPS@%$DVIPS%g
s%@FIG2DEV@%$FIG2DEV%g
s%@TUTORIAL_TARGETS@%$TUTORIAL_TARGETS%g
s%@REFERENCE_TARGETS@%$REFERENCE_TARGETS%g
+s%@CINT@%$CINT%g
+s%@MAKECINT@%$MAKECINT%g
+s%@CINTSYSDIR@%$CINTSYSDIR%g
+s%@LIBGINACCINT@%$LIBGINACCINT%g
+s%@GINACCINTDIR@%$GINACCINTDIR%g
CEOF
EOF
CONFIG_FILES=\${CONFIG_FILES-"Makefile
GiNaC.spec
+ginac-config
ginac/Makefile
check/Makefile
ginsh/Makefile
+tools/Makefile
doc/Makefile
doc/tutorial/Makefile
doc/reference/Makefile
+cint/Makefile
+cint/ginaccint
"}
EOF
cat >> $CONFIG_STATUS <<\EOF
EOF
cat >> $CONFIG_STATUS <<\EOF
test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
-
+chmod +x ginac-config cint/ginaccint
exit 0
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-echo "Configuration done. Now type \"make\"."
+
+if test "x${ginac_error}" = "xyes"; then
+ echo "**** The following problems have been detected by configure."
+ echo "**** Please check the messages below before running \"make\"."
+ echo "**** (see the section 'Common Problems' in the INSTALL file)"
+ echo "$ginac_error_txt"
+ if test "x${ginac_warning_txt}" != "x"; then
+ echo "${ginac_warning_txt}"
+ fi
+ echo "deleting cache ${cache_file}"
+ rm -f $cache_file
+ else
+ if test x$ginac_warning = xyes; then
+ echo "=== The following minor problems have been detected by configure."
+ echo "=== Please check the messages below before running \"make\"."
+ echo "=== (see the section 'Common Problems' in the INSTALL file)"
+ echo "$ginac_warning_txt"
+ fi
+ echo "Configuration of GiNaC $VERSION done. Now type \"make\"."
+fi