+++ /dev/null
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_alias = @host_alias@
-host_triplet = @host@
-ARCHIVE_AGE = @ARCHIVE_AGE@
-ARCHIVE_VERSION = @ARCHIVE_VERSION@
-AS = @AS@
-CC = @CC@
-CINT = @CINT@
-CINTSYSDIR = @CINTSYSDIR@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
-DOXYGEN = @DOXYGEN@
-DVIPS = @DVIPS@
-FIG2DEV = @FIG2DEV@
-GINACCINTDIR = @GINACCINTDIR@
-GINACLIB_BINARY_AGE = @GINACLIB_BINARY_AGE@
-GINACLIB_CPPFLAGS = @GINACLIB_CPPFLAGS@
-GINACLIB_INTERFACE_AGE = @GINACLIB_INTERFACE_AGE@
-GINACLIB_LIBS = @GINACLIB_LIBS@
-GINACLIB_MAJOR_VERSION = @GINACLIB_MAJOR_VERSION@
-GINACLIB_MICRO_VERSION = @GINACLIB_MICRO_VERSION@
-GINACLIB_MINOR_VERSION = @GINACLIB_MINOR_VERSION@
-GINACLIB_VERSION = @GINACLIB_VERSION@
-GINSH_LIBS = @GINSH_LIBS@
-LATEX = @LATEX@
-LD = @LD@
-LEX = @LEX@
-LIBTERMCAP = @LIBTERMCAP@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LT_AGE = @LT_AGE@
-LT_CURRENT = @LT_CURRENT@
-LT_RELEASE = @LT_RELEASE@
-LT_REVISION = @LT_REVISION@
-MAINT = @MAINT@
-MAKECINT = @MAKECINT@
-MAKEINDEX = @MAKEINDEX@
-MAKEINFO = @MAKEINFO@
-NM = @NM@
-OBJDUMP = @OBJDUMP@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-REFERENCE_TARGETS = @REFERENCE_TARGETS@
-TUTORIAL_TARGETS = @TUTORIAL_TARGETS@
-VERSION = @VERSION@
-YACC = @YACC@
-
-SUBDIRS = ginac check ginsh tools @GINACCINTDIR@ doc
-DIST_SUBDIRS = cint ginac check ginsh tools doc
-
-# Requires automake 1.4
-AUTOMAKE_OPTIONS = 1.4
-
-# GiNaC runtime configuration script
-bin_SCRIPTS = ginac-config
-
-# All the rest of the distributed files
-EXTRA_DIST = autogen.sh ginac.m4
-
-# M4 macro file for inclusion with autoconf
-m4datadir = $(datadir)/aclocal
-m4data_DATA = ginac.m4
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES = GiNaC.spec ginac-config
-SCRIPTS = $(bin_SCRIPTS)
-
-DATA = $(m4data_DATA)
-
-DIST_COMMON = README ./stamp-h.in AUTHORS COPYING ChangeLog \
-GiNaC.spec.in INSTALL Makefile.am Makefile.in NEWS acconfig.h \
-acinclude.m4 aclocal.m4 config.guess config.h.in config.sub configure \
-configure.in ginac-config.in install-sh ltconfig ltmain.sh missing \
-mkinstalldirs
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = tar
-GZIP_ENV = --best
-all: all-redirect
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
- cd $(top_builddir) \
- && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in acinclude.m4
- cd $(srcdir) && $(ACLOCAL)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- $(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
- cd $(srcdir) && $(AUTOCONF)
-
-config.h: stamp-h
- @if test ! -f $@; then \
- rm -f stamp-h; \
- $(MAKE) stamp-h; \
- else :; fi
-stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
- cd $(top_builddir) \
- && CONFIG_FILES= CONFIG_HEADERS=config.h \
- $(SHELL) ./config.status
- @echo timestamp > stamp-h 2> /dev/null
-$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@$(srcdir)/stamp-h.in
- @if test ! -f $@; then \
- rm -f $(srcdir)/stamp-h.in; \
- $(MAKE) $(srcdir)/stamp-h.in; \
- else :; fi
-$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h
- cd $(top_srcdir) && $(AUTOHEADER)
- @echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null
-
-mostlyclean-hdr:
-
-clean-hdr:
-
-distclean-hdr:
- -rm -f config.h
-
-maintainer-clean-hdr:
-GiNaC.spec: $(top_builddir)/config.status GiNaC.spec.in
- cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-ginac-config: $(top_builddir)/config.status ginac-config.in
- cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-install-binSCRIPTS: $(bin_SCRIPTS)
- @$(NORMAL_INSTALL)
- $(mkinstalldirs) $(DESTDIR)$(bindir)
- @list='$(bin_SCRIPTS)'; for p in $$list; do \
- if test -f $$p; then \
- echo " $(INSTALL_SCRIPT) $$p $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`"; \
- $(INSTALL_SCRIPT) $$p $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`; \
- else if test -f $(srcdir)/$$p; then \
- echo " $(INSTALL_SCRIPT) $(srcdir)/$$p $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`"; \
- $(INSTALL_SCRIPT) $(srcdir)/$$p $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`; \
- else :; fi; fi; \
- done
-
-uninstall-binSCRIPTS:
- @$(NORMAL_UNINSTALL)
- list='$(bin_SCRIPTS)'; for p in $$list; do \
- rm -f $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`; \
- done
-
-install-m4dataDATA: $(m4data_DATA)
- @$(NORMAL_INSTALL)
- $(mkinstalldirs) $(DESTDIR)$(m4datadir)
- @list='$(m4data_DATA)'; for p in $$list; do \
- if test -f $(srcdir)/$$p; then \
- echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(m4datadir)/$$p"; \
- $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(m4datadir)/$$p; \
- else if test -f $$p; then \
- echo " $(INSTALL_DATA) $$p $(DESTDIR)$(m4datadir)/$$p"; \
- $(INSTALL_DATA) $$p $(DESTDIR)$(m4datadir)/$$p; \
- fi; fi; \
- done
-
-uninstall-m4dataDATA:
- @$(NORMAL_UNINSTALL)
- list='$(m4data_DATA)'; for p in $$list; do \
- rm -f $(DESTDIR)$(m4datadir)/$$p; \
- done
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-
-@SET_MAKE@
-
-all-recursive install-data-recursive install-exec-recursive \
-installdirs-recursive install-recursive uninstall-recursive \
-check-recursive installcheck-recursive info-recursive dvi-recursive:
- @set fnord $(MAKEFLAGS); amf=$$2; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
- @set fnord $(MAKEFLAGS); amf=$$2; \
- dot_seen=no; \
- rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
- rev="$$subdir $$rev"; \
- test "$$subdir" = "." && dot_seen=yes; \
- done; \
- test "$$dot_seen" = "no" && rev=". $$rev"; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS)'; \
- unique=`for i in $$list; do echo $$i; done | \
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- here=`pwd` && cd $(srcdir) \
- && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS)'; \
- unique=`for i in $$list; do echo $$i; done | \
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
- -rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration. Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
- -rm -rf $(distdir)
- GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
- mkdir $(distdir)/=build
- mkdir $(distdir)/=inst
- dc_install_base=`cd $(distdir)/=inst && pwd`; \
- cd $(distdir)/=build \
- && ../configure --srcdir=.. --prefix=$$dc_install_base \
- && $(MAKE) $(AM_MAKEFLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) dvi \
- && $(MAKE) $(AM_MAKEFLAGS) check \
- && $(MAKE) $(AM_MAKEFLAGS) install \
- && $(MAKE) $(AM_MAKEFLAGS) installcheck \
- && $(MAKE) $(AM_MAKEFLAGS) dist
- -rm -rf $(distdir)
- @banner="$(distdir).tar.gz is ready for distribution"; \
- dashes=`echo "$$banner" | sed s/./=/g`; \
- echo "$$dashes"; \
- echo "$$banner"; \
- echo "$$dashes"
-dist: distdir
- -chmod -R a+r $(distdir)
- GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
- -rm -rf $(distdir)
-dist-all: distdir
- -chmod -R a+r $(distdir)
- GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
- -rm -rf $(distdir)
-distdir: $(DISTFILES)
- -rm -rf $(distdir)
- mkdir $(distdir)
- -chmod 777 $(distdir)
- here=`cd $(top_builddir) && pwd`; \
- top_distdir=`cd $(distdir) && pwd`; \
- distdir=`cd $(distdir) && pwd`; \
- cd $(top_srcdir) \
- && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu Makefile
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
- cp -pr $$d/$$file $(distdir)/$$file; \
- else \
- test -f $(distdir)/$$file \
- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
- || cp -p $$d/$$file $(distdir)/$$file || :; \
- fi; \
- done
- for subdir in $(DIST_SUBDIRS); do \
- if test "$$subdir" = .; then :; else \
- test -d $(distdir)/$$subdir \
- || mkdir $(distdir)/$$subdir \
- || exit 1; \
- chmod 777 $(distdir)/$$subdir; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
- || exit 1; \
- fi; \
- done
-info-am:
-info: info-recursive
-dvi-am:
-dvi: dvi-recursive
-check-am: all-am
-check: check-recursive
-installcheck-am:
-installcheck: installcheck-recursive
-all-recursive-am: config.h
- $(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-install-exec-am: install-binSCRIPTS
-install-exec: install-exec-recursive
-
-install-data-am: install-m4dataDATA
-install-data: install-data-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-recursive
-uninstall-am: uninstall-binSCRIPTS uninstall-m4dataDATA
-uninstall: uninstall-recursive
-all-am: Makefile $(SCRIPTS) $(DATA) config.h
-all-redirect: all-recursive-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs: installdirs-recursive
-installdirs-am:
- $(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(m4datadir)
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES)
- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am: mostlyclean-hdr mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-recursive
-
-clean-am: clean-hdr clean-tags clean-generic mostlyclean-am
-
-clean: clean-recursive
-
-distclean-am: distclean-hdr distclean-tags distclean-generic clean-am
- -rm -f libtool
-
-distclean: distclean-recursive
- -rm -f config.status
-
-maintainer-clean-am: maintainer-clean-hdr maintainer-clean-tags \
- maintainer-clean-generic distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f config.status
-
-.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
-uninstall-binSCRIPTS install-binSCRIPTS uninstall-m4dataDATA \
-install-m4dataDATA install-data-recursive uninstall-data-recursive \
-install-exec-recursive uninstall-exec-recursive installdirs-recursive \
-uninstalldirs-recursive all-recursive check-recursive \
-installcheck-recursive info-recursive dvi-recursive \
-mostlyclean-recursive distclean-recursive clean-recursive \
-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
-dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs-am \
-installdirs mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# Rule to build tar-bzipped distribution package
-$(PACKAGE)-$(VERSION).tar.bz2: dist
-
-# Rule to build RPM distribution package
-rpm: $(PACKAGE)-$(VERSION).tar.gz
- cp $(PACKAGE)-$(VERSRION).tar.gz /usr/src/redhat/SOURCES
- rpm -ba GiNaC.spec
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
git://www.ginac.de / ginac.git / blobdiff