- (l)degree(s), coeff(s, n) and collect(s) were extended to accept expressions

[ginac.git] / INSTALL

diff --git a/INSTALL b/INSTALL
index 656fd7ef89d1ba62bef154f3ce15f734d432986d..7c6258f3889723389732d7913c2cab8e3b229589 100644 (file)
--- a/INSTALL
+++ b/INSTALL
@@ -1,14 +1,19 @@
-Prerequisites
+PREREQUISITES

 =============
 
 =============
 

-GiNaC requires the CLN library by Bruno Haible, available at
-<ftp://ftp.santafe.eu/pub/gnu/> or <ftp://ftp.ilog.fr/pub/Users/haible/gnu/>.
-You will also need a good C++ compiler adhering to the ANSI standard (we 
-used gcc for development so if you have a different compiler you are on 
-your own).
+GiNaC requires the CLN library by Bruno Haible, available from either
+one of the following FTP-sites:
+  * <ftp://ftp.santafe.edu/pub/gnu/>,
+  * <ftp://ftp.ilog.fr/pub/Users/haible/gnu/> or
+  * <ftp://ftpthep.physik.uni-mainz.de/pub/gnu/>.
+You will also need a decent ANSI-compliant C++-compiler.  We use
+`post-EGCS' GCC, i.e GCC >= 2.95 for development so if you have a
+different compiler you are on your own.  Note that you may have to use
+the same compiler you compiled CLN with because of differing
+name-mangling schemes.

 
 
 
 

-Installation
+INSTALLATION

 ============
 
 As with any autoconfiguring GNU software, installation is as easy as this:
 ============
 
 As with any autoconfiguring GNU software, installation is as easy as this:


@@ -17,10 +22,12 @@ As with any autoconfiguring GNU software, installation is as easy as this:
  $ make
  $ make check
 [become root if necessary]
  $ make
  $ make check
 [become root if necessary]

- $ make install
+ # make install

 
 Known to work with:
 
 Known to work with:

-  - Linux/x86, EGCS-1.1.2 or GCC 2-95.1/2-95.2
+  - Linux on x86, Alpha and Sparc using GCC 2-95.x.
+Known not to work with:
+  - GCC 2.7.x or earlier because proper exception support is missing there.

 
 The "configure" script can be given a number of options to enable and
 disable various features. For a complete list, type:
 
 The "configure" script can be given a number of options to enable and
 disable various features. For a complete list, type:


@@ -42,21 +49,49 @@ The time the "make" step takes depends heavily on optimization levels.
 Large amounts of memory (>128MB) will be required by the compiler,
 also depending on optimization.  To give you a rough idea of what you
 have to expect the following table may be helpful.  It was measured on
 Large amounts of memory (>128MB) will be required by the compiler,
 also depending on optimization.  To give you a rough idea of what you
 have to expect the following table may be helpful.  It was measured on

-a P-III/500MHz with "enough" memory:
+an Athlon/800MHz with "enough" memory:

 
 

-step:         | GCC optimization level:  | comment:
-              |  -O0   |  -O1   |  -O2   |
---------------+--------+--------+--------+-------------------------------
-make          |  ~4m   |  ~6m   |  ~10m  | building shared and static lib
-make check    |  ~2m   |  ~2m   |  ~7m   | mostly due to compilation
+step          | GCC optimization  | comment
+              |   -O1   |   -O2   |
+--------------+---------+---------+----------------------------------------
+make          |   ~6m   |   ~8m   | shared and static library
+make check    |   ~8m   |  ~12m   | largely due to compilation

 
 
 
 

+COMMON PROBLEMS
+===============
+

 Problems with CLN
 Problems with CLN

-=================
+-----------------

 
 

-You should use at least CLN V1.0.3, since during the development of
+You should use at least CLN-1.1, since during the development of

 GiNaC various bugs have been discovered and fixed in earlier versions.
 GiNaC various bugs have been discovered and fixed in earlier versions.

-To protect you, the "configure" script checks for a feature that was
-added in V1.0.3 so it won't continue with earlier versions anyhow.

 Please install CLN properly on your system before continuing with
 Please install CLN properly on your system before continuing with

-GiNaC.
+GiNaC.  When using GCC3 as compiler please use at least CLN-1.1.1
+since some parts of GiNaC won't build with CLN-1.1.
+
+Problems with building ginsh
+----------------------------
+
+The most common reason why this doesn't succeed is the absence of
+libreadline and/or the corresponding header files.  Depending on what
+your system/distribution is, you will have to install a package called
+libreadline and maybe libreadline-dev.  If your system's vendor
+doesn't supply such packages, go to <ftp://ftp.gnu.org/gnu/readline/>
+and compile it yourself.
+
+Problems with missing standard header files
+-------------------------------------------
+
+Building GiNaC requires many standard header files.  If you get a
+configure error complaining about such missing files your compiler and
+library are probably not up to date enough and it's no worth
+continuing.  If the only file missing is <sstream>, however, there is
+a solution.  GCC-2.95.2 and earlier don't ship with this file.  A
+working implementation has been available since GCC-2.95.3.  GCC-3.0
+and later have an even better, fully standard-conforming
+implementation, by default.  If you are stuck with GCC-2.95.2 or
+earlier and you cannot upgrade your compiler we recommend obtaining
+the libstdc++-v2 <sstream> header written by Magnus Fromreide.  It was
+posted to the gcc-patches mailing list on November 21 2000:
+<http://gcc.gnu.org/ml/gcc-patches/2000-11/msg01152.html>.